ASTM B163 INCOLOY 800H Seamless Tubes / ASME SB163 INCOLOY 800H Seamless Tubes

ASTM B163 INCOLOY® 800H Seamless Tubes / ASTM B163 ALLOY 800H Seamless Tubes, Incoloy 800H Tubes, ASTM B163 Incoloy 800H Tubes, ASME SB163 Incoloy 800H Tubes, ASTM B163 UNS NO8810 Tubes, Incoloy 800H Seamless Tubes, Incoloy 800 Seamless Tubing.

ASTM B163 Incoloy 800H Seamless Tubes Certified and Tested in accordance with NACE MRO175, Hardness Test, Flare, Hydrostatic Test, Eddy Current test, Grain Size Test, Eddy Current, Annealed, Tempered, Stress Relieved etc.

Savoy Piping Inc., we carry a full inventory of ASTM B163 Incoloy 800H Seamless Tube and Supply ASTM B163 Alloy 800H Seamless Tube products is a a nickel-molybdenum-chromium superalloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments. This nickel alloy is resistant to the formation of grain boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process application in an as welded condition.

We Supply ASTM B163 INCOLOY 800H Tubes in ASTM B163, ASTM B407, ASTM B423, The grade indicates the testing methods required for a given application.

Savoy Piping Inc. specializes in ASTM B163 Incoloy 800H Seamless Tube with years of Experience in Manufacturing ASTM B163 UNS N08810 Seamless Tube. we offer high quality, lower cost but the best service. As a result to that our ASTM B163 Incoloy 800H Tubes export account today is in various countries like Iran, Iraq, Kuwait, Saudi Arabia, Oman, UAE, Singapore, Malaysia, Indonesia, South korea, Chile, Peru, Venezuela, Australia, Nigeria, Angola, Senegal, Mozambique, Algeria, Libya, Azerbaijan, Netherlands, Brazil, Norway, United Kingdom, Mexico, Canada etc.

INCOLOY 800H Seamless Tubes

The INCOLOY® 800H series of alloys offer good strength retention under exposure to extremely corrosive and high temperature environments along with having good creep and rupture strength. They have found wide usage in chemical plants, refineries and power generation facilities.

Suitable applications are found in process piping, heat exchanger and furnace manufacture.<

Incoloy 800H is primarily used in applications with temperatures up to 1100° F, where alloys 800H and 800HT are normally used in temperatures above 1100° F where resistance to creep and rupture is required. The chemical balance allows the nickel steel alloy to exhibit excellent resistance to carburization, oxidation and nitriding atmospheres. Incoloy 800HT will not become embrittled even after long periods of usage in the 1200-1600° F range where many stainless steels become brittle. Excellent cold forming characteristics typically associated with the nickel-chromium alloys are exhibited with 800HT. When cold formed extensively the grain size produces a visibly undulated surface called “orange peel”. Incoloy 800HT can be welded by the common techniques used on stainless steels.

INCOLOY® is a registered trademark of the Special Metals Corporation.

ASTM B163 INCOLOY 800H Tubes Range

ASTM B163 INCOLOY 800H / ASME SB163 INCOLOY 800H Seamless Tubes

Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes

This specification covers Seamless Tubes of nickel and nickel alloys, as shown in Table 1, for use in condenser and heat-exchanger service.

(A) Maximum unless range or minimum is given. Where ellipses (...) appear in this table, there is no requirement and analysis for the element need not be determined or reported.

(B) Element shall be determined arithmetically by difference.

(A) Maximum unless range or minimum is given. Where ellipses (...) appear in this table, there is no requirement and analysis for the element need not be determined or reported.

(B) Element shall be determined arithmetically by difference.

(C) Alloy UNS N08811: Al + Ti, 0.85 − 1.20.

This specification covers outside diameter and average wall, or outside diameter and minimum wall tube.

The sizes covered by this specification are 3 in. (76.2 mm) and under in outside diameter with minimum wall thicknesses of 0.148 in. (3.76 mm) and under, and with average wall thicknesses of 0.165 in. (4.19 mm) and under.

Tube shall be furnished in the alloys and conditions as shown in Table 2. for small diameter and light wall tube (converter sizes), see Appendix X2.

(A) Alloy UNS N08800 is normally employed in service temperatures up to and including 1100°F (593°C). Alloys UNS N08810, UNS N08811, and UNS N08120 are normally employed in service temperatures above 1100°F (539°C) where resistance to creep and rupture is required, and it is annealed to develop controlled grain size for optimum properties in this temperature range.

The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Keywords

Condenser Tubes - Condensers - Heat Exchanger Tubes - Heat Exchangers - Nickel - Nickel Alloys - Seamless Nickel Alloy Tubes - Seamless Pipes and Tubes

INCOLOY 800H Seamless Pipes and Tubes Chemical Composition, UNS NO8800

The chemical composition of Inconel Alloy 800H is provided in the table below:

ASTM B163 INCOLOY 800H Seamless Tubes APPLICAITON

The Incoloy 800 / 800H / 800HT /825 Pipes and Tubes is used in the following applications:-

• Sulphuric acid piping and vessels
• Phosphoric acid evaporators
• Pickling tank heaters, pickling tanks and equipment
• Chemical process equipment
• Propellor shafts
• Tank trucks
• Calorifiers
• Electrostatic precipitator electrodes
• Hot vessels for food, water and seawater,
• ammonium sulphate vessels
• Expansion bellows
• Marine exhaust systems
• Power station ash hoppers
• Ethylene furnace quench boilersHydrocarbon cracking Valves, fittings and other components exposed to corrosive attack from 1100-1800° F
• Industrial furnaces
• Heat-treating equipment
• Chemical and petrochemical processing
• Super-heater and re-heaters in power plants
• Pressure vessels
• Heat exchanger

Supplying ASTM B163 INCOLOY 800H Seamless Tubes to Countries -

We Export ASTM B163 Incoloy 800H Seamless Tubes to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc Savoy Piping Inc. is a well known worldwide Exporter of ASTM B163 Incoloy 800H Seamless Tubes, Savoy Piping Inc. is committed to provide each and every customer with the highest standard of customer service. We deals in ASTM B163 Incoloy 800H Seamless Tube in India and Overseas, offering a wide range of ASTM B163 Incoloy 800H Seamless Tubes