ASTM B163 INCOLOY® 825 Seamless Tubes / ASTM B163 ALLOY 825 Seamless Tubes, Incoloy 825 Tubes, ASTM B163 Incoloy 825 Tubes, ASME SB163 Incoloy 825 Tubes, ASTM B163 UNS NO8825 Tubes, Incoloy 825 Seamless Tubes, Incoloy 825 Seamless Tubing.
ASTM B163 Incoloy 825 Seamless Tubes Certified and Tested in accordance with NACE MRO175, Hardness Test, Flare, Hydrostatic Test, Eddy Current test, Grain Size Test, Eddy Current, Annealed, Tempered, Stress Relieved etc.
Savoy Piping Inc., we carry a full inventory of ASTM B163 Incoloy 825 Seamless Tube and Supply ASTM B163 Alloy 825 Seamless Tube products is a a nickel-molybdenum-chromium superalloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments. This nickel alloy is resistant to the formation of grain boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process application in an as welded condition.
We Supply ASTM B163 INCOLOY 825 Tubes in ASTM B163, ASTM B407, ASTM B423, The grade indicates the testing methods required for a given application.
Savoy Piping Inc. specializes in ASTM B163 Incoloy 825 Seamless Tube with years of Experience in Manufacturing ASTM B163 UNS N08825 Seamless Tube. we offer high quality, lower cost but the best service. As a result to that our ASTM B163 Incoloy 825 Tubes export account today is in various countries like Iran, Iraq, Kuwait, Saudi Arabia, Oman, UAE, Singapore, Malaysia, Indonesia, South korea, Chile, Peru, Venezuela, Australia, Nigeria, Angola, Senegal, Mozambique, Algeria, Libya, Azerbaijan, Netherlands, Brazil, Norway, United Kingdom, Mexico, Canada etc.
INCOLOY 825 Seamless Tubes
Incoloy 825 is a nickel-iron-chromium alloy with additions of molybdenum and copper. This nickel steel alloy’s chemical composition is designed to provide exceptional resistance to many corrosive environments. It is similar to alloy 800 but has improved resistance to aqueous corrosion. It has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking, and to localized attack such as pitting and crevice corrosion.
Alloy 825 is especially resistant to sulfuric and phosphoric acids. This nickel steel alloy is used for chemical processing, pollution-control equipment, oil and gas well piping, nuclear fuel reprocessing, acid production, and pickling equipment.
INCOLOY® is a registered trademark of the Special Metals Corporation.
Characteristics of Incoloy 825
- Excellent resistance to reducing and oxidizing acids
- Good resistance to stress-corrosion cracking
- Satisfactory resistance to localized attack like pitting and crevice corrosion
- Very resistant to sulfuric and phosphoric acids
- Good Mechanical Properties at both room and elevated temperatures up to approximately 1020° F
- Permission for pressure-vessel use at wall temperatures up to 800°F
INCOLOY® is a registered trademark of the Special Metals Corporation.
ASTM B163 INCOLOY 825 Tubes Range
| ASTM B163 Incoloy 825 Seamless Tubes Specification | ASTM B163 / ASTM B407 / ASTM B423 / ASME SB163 / ASME SB407 / ASME SB423 |
| ASTM B163 Incoloy 825 Seamless Tubes Grades | INCOLOY 800 / INCOLOY 800H / INCOLOY 800HT / INCOLOY 825 / UNS NO8800 / UNS NO8810 / UNS NO8811 / UNS NO8825 |
| ASTM B163 Incoloy 825 Seamless Tubes Type | Cold Drawn Seamless / Welded / ERW |
| ASTM B163 Incoloy 825 Seamless Tubes Outer Diameter Size | Seamless - 1/4" NB to 6" NB (Nominal Bore Size) Welded / ERW- 1" NB to 16" NB (Nominal Bore Size) |
| ASTM B163 Incoloy 825 Seamless Tubes Wall Thickness | Schedule 10 to Schedule 160 |
| ASTM B163 Incoloy 825 Seamless Tubes Length | 5 to 7 Meters, 09 to 13 Meters, Single Random Length, Double Random Length And Customize Size. |
| ASTM B163 Incoloy 825 Seamless Tubes Pipe Ends | Plain Ends / Beveled Ends |
| ASTM B163 Incoloy 825 Seamless Tubes Delivery Conditions | As Rolled, Cold Drawn, Hot Finish, Stress Relieved, Annealed, Hardened, Tempered |
| ASTM B163 Incoloy 825 Seamless Tubes Coating | Electropolish, Mechanical Polish, Satin Finish, Passivated |
| ASTM B163 Incoloy 825 Seamless Tubes Other Testing | NACE MRO175, Hardness Test, Flare, Hydrostatic Test, Eddy Current test, Grain Size Test, Eddy Current, Annealed, Tempered, Stress Relieved etc. |
| ASTM B163 Incoloy 825 Seamless Tubes Dimension | All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM And ASME |
| ASTM B163 Incoloy 825 Seamless Tubes Value Added Services | Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Heat Treatment |
| ASTM B163 Incoloy 825 Seamless Tubes Packaging | Loose / Bundle / Wooden Pallet / Wooden box-a / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector |
| ASTM B163 Incoloy 825 Seamless Tubes Shipment & Transportation | By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes |
| ASTM B163 Incoloy 825 Seamless Tubes Material Test Certificate | Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC |
ASTM B163 INCOLOY 825 / ASME SB163 INCOLOY 825 Seamless Tubes
Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
This specification covers Seamless Tubes of nickel and nickel alloys, as shown in Table 1, for use in condenser and heat-exchanger service.
(A) Maximum unless range or minimum is given. Where ellipses (...) appear in this table, there is no requirement and analysis for the element need not be determined or reported.
(B) Element shall be determined arithmetically by difference.
(A) Maximum unless range or minimum is given. Where ellipses (...) appear in this table, there is no requirement and analysis for the element need not be determined or reported.
(B) Element shall be determined arithmetically by difference.
(C) Alloy UNS N08811: Al + Ti, 0.85 − 1.20.
This specification covers outside diameter and average wall, or outside diameter and minimum wall tube.
The sizes covered by this specification are 3 in. (76.2 mm) and under in outside diameter with minimum wall thicknesses of 0.148 in. (3.76 mm) and under, and with average wall thicknesses of 0.165 in. (4.19 mm) and under.
Tube shall be furnished in the alloys and conditions as shown in Table 2. for small diameter and light wall tube (converter sizes), see Appendix X2.
(A) Alloy UNS N08800 is normally employed in service temperatures up to and including 1100°F (593°C). Alloys UNS N08810, UNS N08811, and UNS N08120 are normally employed in service temperatures above 1100°F (539°C) where resistance to creep and rupture is required, and it is annealed to develop controlled grain size for optimum properties in this temperature range.
The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
Keywords
Condenser Tubes - Condensers - Heat Exchanger Tubes - Heat Exchangers - Nickel - Nickel Alloys - Seamless Nickel Alloy Tubes - Seamless Pipes and Tubes
ASTM B163 INCOLOY 825 Seamless Pipes and Tubes Chemical Composition, UNS NO8800
The chemical composition of Inconel Alloy 825 is provided in the table below:
| C | MN | S | Si | Cr | Ni | Mo | Cu | Ti | Al | Fe | Other |
| 0.05 max | 1.0 max | 0.03 max | 0.5 max | 19.5 - 23.5 | 38.0 - 46.0 |
2.5 - 3.5 | 1.5 - 3.0 | 0.6 1.2 | 0.2 max | 22.0 min | 3.15 4.15 |
ASTM B163 INCOLOY 825 Seamless Tubes APPLICAITON
The Incoloy 800 / 800H / 800HT /825 Pipes and Tubes is used in the following applications:-
- Sulphuric acid piping and vessels
- Phosphoric acid evaporators
- Pickling tank heaters, pickling tanks and equipment
- Chemical process equipment
- Propellor shafts
- Tank trucks
- Calorifiers
- Electrostatic precipitator electrodes
- Hot vessels for food, water and seawater,
- ammonium sulphate vessels
- Expansion bellows
- Marine exhaust systems
- Power station ash hoppers
- Ethylene furnace quench boilersHydrocarbon cracking Valves, fittings and other components exposed to corrosive attack from 1100-1800° F
- Industrial furnaces
- Heat-treating equipment
- Chemical and petrochemical processing
- Super-heater and re-heaters in power plants
- Pressure vessels
- Heat exchanger
Supplying ASTM B163 INCOLOY 825 Seamless Tubes to Countries -
We Export ASTM B163 Incoloy 825 Seamless Tubes to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc
Savoy Piping Inc. is a well known worldwide Exporter of ASTM B163 Incoloy 825 Seamless Tubes, Savoy Piping Inc. is committed to provide each and every customer with the highest standard of customer service. We deals in ASTM B163 Incoloy 825 Seamless Tube in India and Overseas, offering a wide range of ASTM B163 Incoloy 825 Seamless Tubes