ASTM B165 Monel 400 Seamless Tubes / ASME SB165 Monel 400 Seamless Tubes, ASTM B165 Monel 400 Tubes, ASME SB165 Monel 400 Tubes, ASTM B165 Alloy 400 Tubes, ASME SB165 Alloy 400 Tubes, ASTM B165 Monel Seamless Tubes, ASME SB165 Monel Seamless Tubes, Nickel Copper Alloy UNS NO4400, Monel Tubing
Monel 400 Seamless Tubes Certified and Tested in accordance with NACE MRO175, Hardness Test, Flare, Hydrostatic Test, Eddy Current test, Grain Size Test, Eddy Current, Annealed, Tempered, Stress Relieved etc.
Savoy Piping Inc., we carry a full inventory of ASTM B165 Monel 400 Seamless Tube and Supply ASTM B165 Alloy 400 Seamless Tube products in a variety of sizes to meet the High Strength and corrosion resistance in a range of media including sea water, hydrofluoric acid, sulphuric acid, and alkalies.
We Supply ASTM B165 Monel 400 Seamless Tubes in ASTM B163 MONEL 400, ASTM B165 Monel 400, ASTM B725 MONEL 400. The grade indicates the testing methods required for a given application.
Savoy Piping Inc. specializes in ASTM B165 Monel 400 Seamless Tube with years of Experience in Manufacturing ASTM B165 UNS N04400 Seamless Tube. we offer high quality, lower cost but the best service. As a result to that our ASTM B165 Monel 400 Seamless Tubes export account today is in various countries like Iran, Iraq, Kuwait, Saudi Arabia, Oman, UAE, Singapore, Malaysia, Indonesia, South korea, Chile, Peru, Venezuela, Australia, Nigeria, Angola, Senegal, Mozambique, Algeria, Libya, Azerbaijan, Netherlands, Brazil, Norway, United Kingdom, Mexico, Canada etc.
monel® 400 (UNS N04400)
Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.
Monel 400 has great Mechanical Properties at subzero temperatures, can be used in temperatures up to 1000° F, and its melting point is 2370-2460° F. However, alloy 400 is low in strength in the annealed condition so, a variety of tempers may be used to increase the strength
The term carbon steel may also be used in reference to steel which is not stainless steel; in this use carbon steel may include alloy steels.
Monel® is a registered trademark of the Special Metals Corporation.
ASTM B165 Monel 400 Seamless Tubes Range
| ASTM B165 Monel 400 Seamless Tubes Specification | ASTM B163 / ASME SB163 / ASTM B165 / ASME SB165 / ASTM B725 / ASME SB725 / UNS N04400 |
| ASTM B165 Monel 400 Seamless Tubes Grades | Monel 400 / MONEL 401 MONEL R-405 / MONEL 404 / MONEL K500 / UNS NO4400 |
| ASTM B165 Monel 400 Seamless Tubes Type | ot Rolled / Cold Drawn / Welded / ERW |
| ASTM B165 Monel 400 Seamless Tubes Outer Diameter Size | Seamless - 1/4" NB to 6" NB (Nominal Bore Size) Welded / ERW- 1" NB to 16" NB (Nominal Bore Size) |
| ASTM B165 Monel 400 Seamless Tubes Wall Thickness | Schedule 10 to Schedule 160 |
| ASTM B165 Monel 400 Seamless Tubes Length | 5 to 7 Meters, 09 to 13 Meters, Single Random Length, Double Random Length And Customize Size. |
| ASTM B165 Monel 400 Seamless Tubes Ends | Plain Ends / Beveled Ends |
| ASTM B165 Monel 400 Seamless Tubes Delivery Conditions | As Rolled, Cold Drawn, Hot Finish, Stress Relieved, Annealed, Hardened, Tempered |
| ASTM B165 Monel 400 Seamless Tubes Coating | Electropolish, Mechanical Polish, Satin Finish, Passivated |
| Monel 400 Seamless Tubes Other Testing | NACE MRO175, Hardness Test, Flare, Hydrostatic Test, Eddy Current test, Grain Size Test, Eddy Current, Annealed, Tempered, Stress Relieved etc. |
| ASTM B165 Monel 400 Seamless Tubes Dimension | All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM And ASME |
| ASTM B165 Monel 400 Seamless Tubes Value Added Services | Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Heat Treatment |
| ASTM B165 Monel 400 Seamless Tubes Packaging | Loose / Bundle / Wooden Pallet / Wooden box-a / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector |
| ASTM B165 Monel 400 Seamless Tubes Shipment & Transportation | By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes |
| ASTM B165 Monel 400 Seamless Tubes Material Test Certificate | Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC |
ASTM B165 / ASME SB165 Monel 400 Seamless Tubes / alloy 400 Seamless Tubes
Standard Specification for Nickel-Copper Alloy (UNS N04400) Seamless Pipe and Tube
This specification covers nickel-copper alloy UNS N04400 in the form of cold-worked seamless pipe and tube. The material shall conform to the composition limits specified. Tension test, hydrostatic test, nondestructive electric test, and rounding method shall be done in accordance to the specified requirements.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
Scope
This specification2 covers nickel-copper alloy UNS N044003 in the form of cold-worked seamless pipe and tube in the conditions shown in Table 1 and Table X1.1.
Hot worked material is available. Properties and permissible tolerances are to be agreed upon between the manufacturer and purchaser.
The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
ASTM B165 Monel 400 Seamless Tubes Chemical Composition
The chemical composition of Monel 400 Alloy is given in the following table.
| Element | Content (%) |
|---|---|
| Nickel, Ni | Remainder |
| Copper, Cu | 28-34 |
| Iron, Fe | 2.5 max |
| Manganese, Mn | 2 max |
| Silicon, Si | 0.5 max |
| Carbon, C | 0.3 max |
| Sulphur, S | 0.024 |
ASTM B165 Monel 400 Seamless Tubes Physical Properties
The following table discusses the physical properties of Monel 400 Alloy.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 8.8 gm/cm3 | 0.318 lb/in3 |
ASTM B165 Monel400 Seamless Tubes Mechanical Properties
The Mechanical Properties of Monel 400 Alloy are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength(annealed) | 517-620 MPa | 75-90 ksi |
| Yield strength | 172-345 MPa | 25-50 ksi |
| Modulus of elasticity | 179 GPa | 26000 ksi |
| Poisson’s ratio | 0.32 | 0.32 |
ASTM B165 Monel 400 Seamless Tubes Applications
The Monel 400 Alloy Pipes and Tubes is used in the following applications:-
- Marine Fixtures, Pumps, Valves and Piping Systems for Sea Water Applications
- Chemical Plant Equipment
- Frames for Eyeglasses
- Aerospace Applications
- Musical Instruments.
Supplying ASTM B165 Monel Seamless Tubes to Countries -
We Export ASTM B165 Monel 400 Seamless Tubes to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc
Savoy Piping Inc. is a well known worldwide Exporter of ASTM B165 Monel 400 Seamless Tubes, Savoy Piping Inc. is committed to provide each and every customer with the highest standard of customer service. We deals in ASTM B165 Monel 400 Seamless Tube in India and Overseas, offering a wide range of ASTM B165 Monel 400 Seamless Tubes