UNS S32750 Tube, Duplex Steel 2750 Tubes, 2750 Duplex Stainless Steel Seamless Tubing, SASTM A789 Duplex Steel S32750 Tubes, SAF 2750 Seamless Tubing, Duplex Steel S32750 Seamless Tube, Duplex Steel UNS S32750 Tubes, Duplex Steel DIN 1.4462 Seamless Tubes, Duplex Steel S32750 Tubing Manufacturer In India.
Manufacturing High Quality ASTM A790 UNS S32750 Duplex Stainless Steel Seamless Pipes in India, Supplying Worlwide.
Savoy Piping Inc., we carry a full inventory of ASTM A790 UNS S32750 Duplex Stainless Steel Tube and Supply ASTM A790 UNS S32750 Duplex Stainless Steel Seamless Tube their microstructures consist of a mixture of austenite and ferrite phases.As a result, duplex stainless steels display properties characteristic of both austenitic and ferritic stainless steels.
We Supply Duplex Stainless Steel Pipes and Tubes in Specification ASME SA / ASTM A789, A790, A928 and Grades UNS S32205, UNS S31803, UNS S32750, UNS S32760, SAF 2205, SAF 2507 etc. The grade indicates the testing methods required for a given application.
Savoy Piping Inc. specializes in ASTM A790 UNS S32205 Duplex Stainless Steel Seamless Tube with years of Experience in Manufacturing ASTM A790 UNS S32205 Duplex Stainless Steel Seamless Tube. we offer high quality, lower cost but the best service. As a result to that our Duplex Stainless Steel Seamless Tube export account today is in various countries like Iran, Iraq, Kuwait, Saudi Arabia, Oman, UAE, Singapore, Malaysia, Indonesia, South korea, Chile, Peru, Venezuela, Australia, Nigeria, Angola, Senegal, Mozambique, Algeria, Libya, Azerbaijan, Netherlands, Brazil, Norway, United Kingdom, Mexico, Canada etc.
Duplex stainless steels are called “duplex” because they have a two-phase microstructure consisting of grains of ferritic and austenitic stainless steel. The picture shows the yellow austenitic phase as “islands” surrounded by the blue ferritic phase. When duplex stainless steel is melted it solidifies from the liquid phase to a completely ferritic structure. As the material cools to room temperature, about half of the ferritic grains transform to austenitic grains (“islands”). The result is a microstructure of roughly 50% austenite and 50% ferrite.
Whilst duplex stainless steel are considered resistant to stress corrosion cracking, they are not as resistant to this form of attack as ferritic stainless steel. However, the corrosion resistance of the least resistant Duplex stainless steel is greater than that for the most commonly used grades of stainless steel, i.e. 304 and 316.
Duplex stainless steel are also magnetic, a property that can be used to easily differentiate them from common austenitic grades of stainless.
Duplex 2205 stainless steel (both ferritic and austenitic) is used extensively in applications that require good corrosion resistance and strength. The UNS S31803 grade stainless steel has undergone a number of modifications resulting in UNS S32205, and was endorsed in the year 1996. This grade offers higher resistance to corrosion.
At temperatures above 300°C, the brittle micro-constituents of this grade undergo precipitation, and at temperatures below -50°C the micro-constituents undergo ductile-to-brittle transition; hence this grade of stainless steel is not suitable for use at these temperatures.
SAF 2205, is a Sandvik-owned trademark for a 22Cr duplex (ferritic-austenitic) stainless steel.
UNS S32750 Duplex Stainless Steel Instrumentation Tubes Range
| Stainless Steel Tubes Specification | ASTM A-249, A-268, A-269, A-270, A-554, A-688, A-778, DIN 17455, DIN 17456, 17457, DIN 17458 [Class 1] & Its equivalent ASME, DIN & EN Standard. |
| Stainless Steel Tubes Grades | 202, 304, 304L, 304H, 304LN, 309S, 310S, 316, 316L, 316H, 316Ti, 316LN, 317L, 321, 321H, 347, 347H, 904L, SMO 254, ALLOY 254, 6MO, 6MOLY, UNS S31254 ETC. |
| Stainless Steel Tubes Type | SEAMLESS / WELDED / ERW / EFW / COLD DRAW / HOT FINISH / COLD FINISH |
| Stainless Steel Tubes Outer Diameter Size | SEAMLESS - 6 MM OD TO 114.3 MM OD WELDED / ERW- 10 MM TO 114.3 MM OD |
| Stainless Steel Tubes Wall Thickness | 0.8 MM TO 4 MM WALL THICKNESS |
| Stainless Steel Tubes Length | 01 Meter to 12.5 Meters, Single Random Length, Double Random Length And Customize Size. |
| Stainless Steel Tubes Ends | Plain Ends / Beveled Ends |
| Stainless Steel Tubes Delivery Conditions | As Rolled, Formed, Stress Relieved, Annealed, Hardened, Tempered, Cold Draw |
| Stainless Steel Tubes Coating | Electropolish, Mechanical Polish, Satin Finish, Passivated |
| Stainless Steel Tubes Other Testing | Product Analysis, Transverse Tension Test, Flattening Test, Etching Test, Radiographic Examination, Stabilizing Heat Treatment, Intergranular Corrosion Test, Weld Decay Test, Magnetic Particle Detection, Grain Size Test, NACE 0175, Dual Grade, PWHT (POST WELD HEAT TREATMENT), Flare Test, Bend Test, Hardness Test, Tensile Test etc |
| Stainless Steel Tubes Dimension | All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM and ASME |
| Stainless Steel Tubes Value Added Services | Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Heat Treatment |
| Stainless Steel Tubes Packaging | Loose / Bundle / Wooden Pallet / Wooden box-a / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector |
| Stainless Steel Tubes Shipment & Transportation | By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes |
| Stainless Steel Tubes Material Test Certificate | Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC |
CHEMICAL COMPOSITION OF ASTM A790 UNS S32750 DUPLEX STAINLESS STEEL SEAMLESS TUBES
| Elements | C | Cr | Cu | Fe | Mo | Mn | N | Ni | P | S | Si | W |
| Minimum | 24.0 | REMAINDER | 3.00 | 0.24 | 6.00 | 0.20 | 0.50 | |||||
| Maximum | 0.030 | 26 | 0.50 | 5.00 | 1.20 | 0.32 | 8.00 | 0.035 | 0.020 | 0.80 | 1.00 |
MECHANICAL PROPERTIES OF ASTM A789 UNS S32750 SUPER DUPLEX STAINLESS STEEL TUBES
| 0.2% Proof Stress (N/mm2 ) [ksi] minimum | 550[79.8] |
| Ultimate Tensile Strength (N/mm2) [ksi] minimum | 800 [116] |
| Elongation (%) minimum | 25 |
| ardness (HBN) | 270 max |
| Reduction of Cross Section Area (%) | 45 |
| Charpy V-notch Impact at ambient Temp (J) [ft.lb] | 80min [59min] |
| Charpy V-notch Impact at -46°C (J) [ft.lb] | 45av, 35min [33av, 25.8min] |
| Additional Testing | |
| ASTM G48A Corrosion test at 40°C | No pitting and weight loss <4.0g/m2 |
| Ultrasonic Testing | According to ASTM A388 |
| Ferrite Content | 35%-55% |
| Microstructure | Microstructure certified free from grain boundary carbides, sigma, chi and laves phases |
PHYSICAL PRIPERTIES OF ASTM A789 UNS S32750 SUPER DUPLEX STAINLESS STEEL TUBES
| Density (Kg.m-1) | 7810 |
| Magnetic Permeability | 33 |
| Young’s Modulus (N/mm2) | 199 x 103 |
| Specific Heat, 20°C (J.Kg-1.°K-1) | 475 |
| Fracture Toughness, Kq (MPa.m) | 475 |
| Specific Electrical Resistance, 20°C (µO.m) | 0.80 |
| Thermal conductivity, 20°C (W.m-1.°K-1) | 14.2 |
| Mean coefficient of thermal expansion, 20-100°C (°K-1) | 11.1 x 10-6 |
ALLOY COMPARISON SUPER DUPLEX STAINLESS STEEL
| Alloy Comparisons | S31803 | S17400 (17-4PH) |
718 ( ST ) |
S31254 | Alloy 32750 |
| 0.2% Proof Strength (N/mm2), minimum | 450 | 1070 | 550 | 300 | 550 |
| Corrosion Rate (mm.y-1) Seawater | <0.01 | ~1 | <0.01 | <0.01 | <0.01 |
| Corrosion Rate (mm.y-1) 10% sulphuric acid at 80°C |
<0.4 | 10 | >1 | 1.5 | <0.15 |
| Corrosion Rate (mm.y-1) Boiling 50% nitric acid |
<0.15 | <0.15 | <0.15 | 0.4 | <0.15 |
| Wear Properties related to Hardness (HBN) | RC25 | RC38 | RC20 | RC20 | RC28 |
ASTM A790 UNS 32750 DUPLEX STAINLESS STEEL PIPES AND TUBES APPLICATIONS
The Duplex Stainless Steel Pipes and Tubes is used in the following applications:-
- Oil and gas equipments
- Offshore technology
- Seawater desalination plants
- Chemical industry
- Bridges
- Storage tanks
- Medical Industry
- Civil Engineering
- Pressure vessels, reactor tanks, and heat exchangers
- Rotors, impellers and shafts
- Power plants
- Petrochemical
- Shipbuilding industry
UNS S32750 DUPLEX STAINLESS STEEL INSTRUMENTATION TUBES SIZES AVAILABLE IN STOCK
- 1/4" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
- 5/16" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
- 3/8" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
- 1/2" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
- 3/4" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
- 1" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
- 1-1/4" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
- 1-1/2" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
- 1-3/4" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
- 2" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
- 2-1/4" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
- 2-1/2" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
- 2-3/4" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
- 3" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
- 3-1/2" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
- 4" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
- 4-1/2" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
- 5" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
SUPPLYING UNS S32750 DUPLEX STAINLESS STEEL INSTRUMENTATION TUBES TO COUNTRIES -
We export UNS S32750 Duplex Stainless Steel Instrumentation Tubes to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc
Savoy Piping Inc. is a well known worldwide Exporter of UNS S32750 Duplex Stainless Steel Instrumentation Tubes, Savoy Piping Inc. is committed to provide each and every customer with the highest standard of customer service. We deals in UNS S32750 Duplex Stainless Steel Instrumentation Tubes in India and Overseas, offering a wide range of UNS S32750 Duplex Stainless Steel Instrumentation Tubes.