Delivering High Quality Stainless Steel and Alloy Piping Products — Pipes, Tubes, Fittings, Flanges and more for Global Industries.
sales@savoypipinginc.com
Delivering High Quality Stainless Steel and Alloy Piping Products — Pipes, Tubes, Fittings, Flanges and more for Global Industries.
sales@savoypipinginc.com
| Choose | When | Watch-outs |
|---|---|---|
| B163 tube (this page) | OD×wall heat-exchanger / instrument tubing | Confirm anneal condition |
| B407 pipe twin | Process piping form of the same grade | Different dimensional system |
| Incoloy hub | Sister grades | State media & temperature |
ASTM B163 Incoloy 800HT seamless tube OD: ____ Wall: ____ Length: ____ Qty: ____ Condition: ____ MTC: 3.1/3.2 Destination: ____
Email sales@savoypipinginc.com with destination and any NACE / TPI notes.
Savoy Piping Inc. supplies Incoloy 800HT seamless tube — Ni-Fe-Cr with controlled C and grain size for elevated-temperature creep strength.
Ni-Fe-Cr with controlled C and grain size for elevated-temperature creep strength.
Use only when HT is named — not a free swap for 800.
| ASTM B163 Incoloy 800HT Seamless Tubes Specification | ASTM B163 / ASTM B407 / ASTM B423 / ASME SB163 / ASME SB407 / ASME SB423 |
| ASTM B163 Incoloy 800HT Seamless Tubes Grades | INCOLOY 800 / INCOLOY 800H / INCOLOY 800HT / INCOLOY 825 / UNS NO8800 / UNS NO8810 / UNS NO8811 / UNS NO8825 |
| ASTM B163 Incoloy 800HT Seamless Tubes Type | Cold Drawn Seamless / Welded / ERW |
| ASTM B163 Incoloy 800HT Seamless Tubes Outer Diameter Size | Seamless - 1/4" NB to 6" NB (Nominal Bore Size) Welded / ERW- 1" NB to 16" NB (Nominal Bore Size) |
| ASTM B163 Incoloy 800HT Seamless Tubes Wall Thickness | Schedule 10 to Schedule 160 |
| ASTM B163 Incoloy 800HT Seamless Tubes Length | 5 to 7 Meters, 09 to 13 Meters, Single Random Length, Double Random Length And Customize Size. |
| ASTM B163 Incoloy 800HT Seamless Tubes Pipe Ends | Plain Ends / Beveled Ends |
| ASTM B163 Incoloy 800HT Seamless Tubes Delivery Conditions | As Rolled, Cold Drawn, Hot Finish, Stress Relieved, Annealed, Hardened, Tempered |
| ASTM B163 Incoloy 800HT Seamless Tubes Coating | Electropolish, Mechanical Polish, Satin Finish, Passivated |
| ASTM B163 Incoloy 800HT Seamless Tubes Other Testing | NACE MR0175, Hardness Test, Flare, Hydrostatic Test, Eddy Current test, Grain Size Test, Eddy Current, Annealed, Tempered, Stress Relieved etc. |
| ASTM B163 Incoloy 800HT Seamless Tubes Dimension | All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM And ASME |
| ASTM B163 Incoloy 800HT Seamless Tubes Value Added Services | Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Heat Treatment |
| ASTM B163 Incoloy 800HT Seamless Tubes Packaging | Loose / Bundle / Wooden Pallet / Wooden box-a / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector |
| ASTM B163 Incoloy 800HT Seamless Tubes Shipment & Transportation | By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 4 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes |
| ASTM B163 Incoloy 800HT Seamless Tubes Material Test Certificate | Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC |
Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
This specification covers Seamless Tubes of nickel and nickel alloys, as shown in Table 1, for use in condenser and heat-exchanger service.
(A) Maximum unless range or minimum is given. Where ellipses (...) appear in this table, there is no requirement and analysis for the element need not be determined or reported.
(B) Element shall be determined arithmetically by difference.
(A) Maximum unless range or minimum is given. Where ellipses (...) appear in this table, there is no requirement and analysis for the element need not be determined or reported.
(B) Element shall be determined arithmetically by difference.
(C) Alloy UNS N08811: Al + Ti, 0.85 − 1.20.
This specification covers outside diameter and average wall, or outside diameter and minimum wall tube.
The sizes covered by this specification are 3 in. (76.2 mm) and under in outside diameter with minimum wall thicknesses of 0.148 in. (3.76 mm) and under, and with average wall thicknesses of 0.165 in. (4.19 mm) and under.
Tube shall be furnished in the alloys and conditions as shown in Table 2. for small diameter and light wall tube (converter sizes), see Appendix X2.
(A) Alloy UNS N08800 is normally employed in service temperatures up to and including 1100°F (593°C). Alloys UNS N08810, UNS N08811, and UNS N08120 are normally employed in service temperatures above 1100°F (539°C) where resistance to creep and rupture is required, and it is annealed to develop controlled grain size for optimum properties in this temperature range.
The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
Keywords
Condenser Tubes - Condensers - Heat Exchanger Tubes - Heat Exchangers - Nickel - Nickel Alloys - Seamless Nickel Alloy Tubes - Seamless Pipes and Tubes
The chemical composition of Inconel Alloy 800HT is provided in the table below:
| Ni | Cr | Fe | C | Al | Ti | Al+Ti |
| 30.0-35.0 | 19.0-23.0 | 39.5 min | .06-.10 | .25-.60 | .25-.60 | 0.85-1.2 |
The Incoloy 800 / 800H / 800HT /825 Pipes and Tubes is used in the following Applications:-
Incoloy 800HT (UNS N08811) — Ni-Fe-Cr with controlled C and grain size for elevated-temperature creep strength.
ASTM B163. Confirm ASME SB companion and product form on the PO.
This page is tube product. Use the matching pipe page when the datasheet says pipe.
EN 10204 3.1 MTC standard; 3.2 and TPI on request.
We supply this product for domestic and export projects with MTC (EN 10204 3.1 standard; 3.2 / TPI on request). Include destination, Incoterms and inspection needs on the RFQ.