Delivering High Quality Stainless Steel and Alloy Piping Products — Pipes, Tubes, Fittings, Flanges and more for Global Industries.
sales@savoypipinginc.com
Delivering High Quality Stainless Steel and Alloy Piping Products — Pipes, Tubes, Fittings, Flanges and more for Global Industries.
sales@savoypipinginc.com
| Choose | When | Watch-outs |
|---|---|---|
| B725 welded (this page) | When welded Monel pipe is allowed / cost-driven | Confirm weld NDE class on PO |
| B165 seamless | Higher-integrity seamless route | Different manufacturing & often lead time |
| B163 tube | Tube form, not pipe | OD×wall ordering |
ASTM B725 Monel 400 welded pipe Size: ____ Wall: ____ Qty: ____ Weld NDE: ____ MTC: 3.1/3.2 Destination: ____
Email sales@savoypipinginc.com with destination and any NACE / TPI notes.
Savoy Piping Inc. supplies Monel 400 welded pipe — Nickel-copper alloy for seawater and many reducing-acid environments.
Nickel-copper alloy for seawater and many reducing-acid environments.
Compare with Cu-Ni 90/10–70/30 for seawater cost vs performance.
| ASTM B725 Monel 400 Welded Pipes Specification | ASTM B163 / ASME SB163 / ASTM B165 / ASME SB165 / ASTM B725 / ASME SB725 / UNS N04400 |
| ASTM B725 Monel 400 Welded Pipes Grades | Monel 400 / MONEL 401 MONEL R-405 / MONEL 404 / MONEL K500 / UNS NO4400 |
| ASTM B725 Monel 400 Welded Pipes Type | ot Rolled / Cold Drawn / Welded / ERW |
| ASTM B725 Monel 400 Welded Pipes Outer Diameter Size | Seamless - 1/4" NB to 6" NB (Nominal Bore Size) Welded / ERW- 1" NB to 16" NB (Nominal Bore Size) |
| ASTM B725 Monel 400 Welded Pipes Wall Thickness | Schedule 10 to Schedule 160 |
| ASTM B725 Monel 400 Welded Pipes Length | 5 to 7 Meters, 09 to 13 Meters, Single Random Length, Double Random Length And Customize Size. |
| ASTM B725 Monel 400 Welded Pipes Ends | Plain Ends / Beveled Ends |
| ASTM B725 Monel 400 Welded Pipes Delivery Conditions | As Rolled, Cold Drawn, Hot Finish, Stress Relieved, Annealed, Hardened, Tempered |
| ASTM B725 Monel 400 Welded Pipes Coating | Electropolish, Mechanical Polish, Satin Finish, Passivated |
| ASTM B725 Monel 400 Welded Pipes Other Testing | NACE MR0175, Hardness Test, Flare, Hydrostatic Test, Eddy Current test, Grain Size Test, Eddy Current, Annealed, Tempered, Stress Relieved etc. |
| ASTM B725 Monel 400 Welded Pipes Dimension | All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM And ASME |
| ASTM B725 Monel 400 Welded Pipes Value Added Services | Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Heat Treatment |
| ASTM B725 Monel 400 Welded Pipes Packaging | Loose / Bundle / Wooden Pallet / Wooden box-a / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector |
| ASTM B725 Monel 400 Welded Pipes Shipment & Transportation | By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 4 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes |
| ASTM B725 Monel 400 Welded Pipes Material Test Certificate | Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC |
Standard Specification for Nickel-Copper Alloy (UNS N04400) Welded Pipe and Tube
This specification covers nickel-copper alloy UNS N04400 in the form of cold-worked seamless pipe and tube. The material shall conform to the composition limits specified. Tension test, hydrostatic test, nondestructive electric test, and rounding method shall be done in accordance to the specified requirements.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and Application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
Scope
This specification2 covers nickel-copper alloy UNS N044003 in the form of cold-worked seamless pipe and tube in the conditions shown in Table 1 and Table X1.1.
Hot worked material is available. Properties and permissible tolerances are to be agreed upon between the manufacturer and purchaser.
The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
The chemical composition of Monel 400 Alloy is given in the following table.
| Element | Content (%) |
|---|---|
| Nickel, Ni | Remainder |
| Copper, Cu | 28-34 |
| Iron, Fe | 2.5 max |
| Manganese, Mn | 2 max |
| Silicon, Si | 0.5 max |
| Carbon, C | 0.3 max |
| Sulphur, S | 0.024 |
The following table discusses the physical properties of Monel 400 Alloy.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 8.8 gm/cm3 | 0.318 lb/in3 |
The Mechanical Properties of Monel 400 Alloy are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength(annealed) | 517-620 MPa | 75-9 ksi |
| Yield strength | 172-34 MPa | 25-50 ksi |
| Modulus of elasticity | 179 GPa | 26000 ksi |
| Poisson’s ratio | 0.32 | 0.32 |
The Monel 400 Alloy Pipes and Tubes is used in the following Applications:-
Monel 400 (UNS N04400) — Nickel-copper alloy for seawater and many reducing-acid environments.
ASTM B725. Confirm ASME SB companion and product form on the PO.
This page is pipe product. Use the matching tube page for heat-exchanger / instrumentation tube.
EN 10204 3.1 MTC standard; 3.2 and TPI on request.
We supply this product for domestic and export projects with MTC (EN 10204 3.1 standard; 3.2 / TPI on request). Include destination, Incoterms and inspection needs on the RFQ.