ASTM B861 Grade 5 Titanium Alloy Seamless Pipes

Titanium Grade 5 Seamless Pipe

ASTM B861 · UNS R56400

Savoy Piping Inc. supplies titanium grade 5 pipes and tubes for chloride-rich and lightweight process service.

Titanium hub · Gr 2 Seamless · Gr 2 Welded

What buyers should specify

Grade/UNS, ASTM product spec, OD × wall, length, ends, and NDE/MTC package.

Typical applications

• Chloride chemical process piping
• Desalination and seawater systems
• Heat-exchanger tubing
• Offshore and marine process lines

Selection guidance

Start with Grade 2 for corrosion; step to Grade 5 for strength; Grade 7 (Pd) when crevice corrosion in chlorides demands it.

ASTM B861 Grade 5 Titanium Seamless Pipes Range

ASTM B861 / ASME SB861 Grade 5 Titanium Seamless Pipes

Standard Specification for Titanium and Titanium Alloy Seamless Pipe

This specification covers the requirements for 34 grades of titanium and Titanium Alloy Seamless pipe intended for general corrosion resisting and elevated temperature service. Alloys may be supplied in the following conditions: Grades 5, 23, 24, 25, 29, 35, or 36 – annealed or aged; Grades 9, 18, 28, or 38 – cold-worked and stress-relieved or annealed; Grades 9, 18, 23, 28, or 29 – transformed-beta condition; and Grades 19, 20, or 21 – solution-treated or solution-treated and aged. The grades shall conform to the required chemical composition for nitrogen, carbon, hydrogen, iron, oxygen, aluminum, vanadium, tin, ruthenium, palladium, chromium, nickel, niobium, zirconium, silicon, and titanium. Chemical analysis and product analysis shall be performed. Mechanical requirements shall conform to the required room temperature values for tensile strength, yield strength, and elongation. The following shall also be performed: tension, flattening, bend, and hydrostatic tests.

1.1 This specification covers the requirements for 34 grades of titanium and Titanium Alloy Seamless pipe intended for general corrosion resisting and elevated temperature service as follows:

1.1.1 Grade 1—UNS R50250. Unalloyed titanium,
1.1.2 Grade 2—UNS R50400. Unalloyed titanium,
1.1.2.1 Grade 2H—UNS R50400. Unalloyed titanium (Grade 2 with 58 ksi (400 MPa) minimum UTS),
1.1.3 Grade 3—UNS R50550. Unalloyed titanium,
1.1.4 Grade 5—UNS R56400. Titanium alloy (6 % aluminum, 4 % vanadium),
1.1.5 Grade 7—UNS R52400. Unalloyed titanium plus 0.12 to 0.25 % palladium,
1.1.5.1 Grade 7H—UNS R52400. Unalloyed titanium plus 0.12 to 0.25 % palladium (Grade 7 with 58 ksi (400 MPa) minimum UTS),
1.1.6 Grade 9—UNS R56320. Titanium alloy (3 % aluminum, 2.5 % vanadium),
1.1.7 Grade 11—UNS R52250. Unalloyed titanium plus 0.12 to 0.25 % palladium,
1.1.8 Grade 12—UNS R53400. Titanium alloy (0.3 % molybdenum, 0.8 % nickel),
1.1.9 Grade 13—UNS R53413. Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.10 Grade 14—UNS R53414. Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.11 Grade 15—UNS R53415. Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.12 Grade 16—UNS R52402. Unalloyed titanium plus 0.04 to 0.08 % palladium,
1.1.12.1 Grade 16H—UNS R52402. Unalloyed titanium plus 0.04 to 0.08 % palladium (Grade 16 with 58 ksi (400 MPa) minimum UTS),
1.1.13 Grade 17—UNS R52252. Unalloyed titanium plus 0.04 to 0.08 % palladium,
1.1.14 Grade 18—UNS R56322. Titanium alloy (3 % aluminum, 2.5 % vanadium plus 0.04 to 0.08 % palladium),
1.1.15 Grade 19—UNS R58640. Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum),
1.1.16 Grade 20—UNS R5864. Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum) plus 0.04 to 0.08 % palladium,
1.1.17 Grade 21—UNS R58210. Titanium alloy (15 % molybdenum, 3 % aluminum, 2.7 % niobium, 0.25 % silicon),
1.1.18 Grade 23—UNS R56407. Titanium alloy (6 % aluminum, 4 % vanadium, extra low interstitial, ELI),
1.1.19 Grade 24—UNS R56405. Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.04 to 0.08 % palladium,
1.1.20 Grade 25—UNS R56403. Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.3 to 0.8 % nickel and 0.04 to 0.08 % palladium,
1.1.21 Grade 26—UNS R52404. Unalloyed titanium plus 0.08 to 0.14 % ruthenium,
1.1.21.1 Grade 26H—UNS R52404. Unalloyed titanium plus 0.08 to 0.14 % ruthenium (Grade 26 with 58 ksi (400 MPa) minimum UTS),
1.1.22 Grade 27—UNS R52254. Unalloyed titanium plus 0.08 to 0.14 % ruthenium,
1.1.23 Grade 28—UNS R56323. Titanium alloy (3 % aluminum, 2.5 % vanadium plus 0.08 to 0.14 % ruthenium),
1.1.24 Grade 29—UNS R56404. Titanium alloy (6 % aluminum, 4 % vanadium, extra low interstitial, ELI plus 0.08 to 0.14 % ruthenium),
1.1.25 Grade 33—UNS R53442. Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % chromium),
1.1.26 Grade 34—UNS R5344. Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % chromium),
1.1.27 Grade 35—UNS R56340. Titanium alloy (4.5 % aluminum, 2 % molybdenum, 1.6 % vanadium, 0.5 % iron, 0.3 % silicon),
1.1.28 Grade 36—UNS R5840. Titanium alloy (4 % niobium),
1.1.29 Grade 37—UNS R52815. Titanium alloy (1.5 % aluminum), and
1.1.30 Grade 38—UNS R54250. Titanium alloy (4 % aluminum, 2.5 % vanadium, 1.5 % iron).

Alpha And Near Alpha Titanium Alloys - Alpha Titanium Alloys - Alpha-Beta Titanium Alloys - Beta Titanium Alloys - Corrosive Service Applications - High-Temperature Service Applications - High-Temperature Services - Seamless Pipes and Tubes - Seamless Titanium Alloy Pipes - Titanium

Chemical Composition of ASTM B861 Grade 5 Titanium Seamless Pipes

ASTM B861 Grade 5 Tensile Strength of Titanium Seamless Pipes

ASTM B861 Grade 5 Titanium Alloy Seamless Pipes Apllicantion

The Titanium Alloy Pipe is used in the following Applications:-

• Chlorination systems
• Flue gas scrubbers
• Outlet ducting and stack liners for power plants, pulp and paper bleach plants, sulfur dioxide scrubbers, and weld overlay of less corrosion resistant metals
• Acid production and pickling systems
• Pharmaceutical industries use alloy fittings and tubing to avoid contamination caused by corrosion related failures
• Cellophane manufacturing
• Chlorination systems
• Pesticide production
• Incineration scrubber systems
• Chemical process industry in equipment like flue gas scrubbers, chlorination systems, sulfur dioxide scrubbers, pulp and paper bleach plants, pickling systems, and nuclear fuel reprocessing
• Waste water processing
• Pollution control stack liners, ducts, dampers, scrubbers, stack-gas reheaters, fans and fan housings
• Flue gas desulfurization systems
• Chemical processing components like heat exchangers, reaction vessels, evaporators, and transfer piping
• Sour gas wells
• Pulp and paper production
• Waste treatment
• Pharmaceutical and food processing equipment

Frequently asked questions — Titanium Grade 5 Seamless Pipe

What is Titanium Grade 5?

Titanium Grade 5 (UNS R56400) titanium tubular product for corrosive and lightweight process systems.

Grade 2 vs Grade 5?

Grade 2 is commercially pure (excellent corrosion, formability). Grade 5 (Ti-6Al-4V) is higher strength for structural/pressure needs.

B861 vs B862 vs B338?

B861 seamless pipe, B862 welded pipe, B338 seamless/welded tube — match the product noun on the PO.

Typical uses?

Chloride process, desalination, offshore, chemical and heat-transfer systems.

ASTM B861 Grade 5 Supplying Titanium Alloy Seamless Pipes to Countries -

We export ASTM B861 Grade 5 Titanium Alloy Seamless Pipes to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Myanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States of America, Canada, Mexico, Panama, Costa Rica, Puerto Rico, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherlands, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc

Savoy Piping Inc. is a well known worldwide Exporter of ASTM B861 Grade 5 Titanium Alloy Seamless Pipes, Savoy Piping Inc. is committed to provide each and every customer with the highest standard of customer service. We deal in ASTM B861 Grade 5 Titanium Alloy Seamless Pipe in India and Overseas, offering a wide range of ASTM B861 Grade 5 Titanium Alloy Seamless Pipes.