Delivering High Quality Instrumentation Application in Tubes, Fittings, Accessories, Precision, Valves, etc.

HYDRAULIC TUBING AND INSTRUMENTATION TUBING

SANDVIK COMPATIBLE INSTRUMENTATION TUBES MANUFACTURER & SUPPLIER IN INDIA

Hydraulic tubes and instrumentation tubes in a comprehensive range of corrosion-resistant stainless steels and nickel alloys covering outside diameters from (OD) 1.59 to 50 mm (0.0625 to 1.968 in.). All sizes are supplied with smooth surfaces and close dimensional tolerances reducing the risk of leakages when connecting tubes with couplings.

Standard delivery form for Sandvik hydraulic and instrumentation tube is straight lengths of 6 meters, but our tubes can also be delivered as coiled tubing, contributing to reduced installation costs.

Tubes with high cleanliness Sandvik hydraulic tubes and instrumentation tubes are characterized by high cleanliness, and tubes with OD larger than 5 mm (0.196 in.) can be delivered with plugged ends for transport protection against inside contamination.


SANDVIK COMPATIBLE INSTRUMENTATION TUBES RANGE

SANDVIK COMPATIBLE INSTRUMENTATION TUBES Specification ASTM B338 / ASTM B861 / ASTM B862 / ASME SB338 / ASME SB861 / ASME SB862
SANDVIK COMPATIBLE INSTRUMENTATION TUBES Grades GRADE 1 , GRADE 2, GRADE 3 , GRADE 5 , GRADE 7, GRADE 8, GRADE 9, GRADE 11, GRADE 12, GRADE 23, UNS R50250, UNS R50400, UNS R56400, UNS R52400, UNS R56320, UNS R53400, Ti-6Al-4V, C-130AM, C-110M, Ti-4Al-3Mo-1V, Ti-6Al-2Sn-4Zr-2Mo, Ti-8Al-1Mo-1V, Ti-13V-11Cr-3Al, Ti-15V-3Cr-3Sn-3Al
SANDVIK COMPATIBLE INSTRUMENTATION TUBES Type ot Rolled / Cold Drawn / Welded / ERW
SANDVIK COMPATIBLE INSTRUMENTATION TUBES Outer Diameter Size Seamless - 1/4" NB To 12" NB (Nominal Bore Size)
Welded / ERW- 1" NB To 16" NB (Nominal Bore Size)
SANDVIK COMPATIBLE INSTRUMENTATION TUBES Wall Thickness Schedule 10 To Schedule 160
SANDVIK COMPATIBLE INSTRUMENTATION TUBES Length 5 To 7 Meters, 09 To 13 Meters, Single Random Length, Double Random Length And Customize Size.
SANDVIK COMPATIBLE INSTRUMENTATION TUBES Pipe Ends Plain Ends / Beveled Ends
SANDVIK COMPATIBLE INSTRUMENTATION TUBES Delivery Conditions As Rolled, Cold Drawn, Hot Finish, Stress Relieved, Annealed, Hardened, Tempered
SANDVIK COMPATIBLE INSTRUMENTATION TUBES Coating Electropolish, Mechanical Polish, Satin Finish, Passivated
SANDVIK COMPATIBLE INSTRUMENTATION TUBES Other Testing ardness Test, Hydrostatic Test, Eddy Current test, Eddy Current, Tensile Test, Flattening, Flare Test, Annealed, Hydrostatic Test, Tempered, Stress Relieved etc.
SANDVIK COMPATIBLE INSTRUMENTATION TUBES Dimension All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM and ASME
SANDVIK COMPATIBLE INSTRUMENTATION TUBES Value Added Services Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Heat Treatment
SANDVIK COMPATIBLE INSTRUMENTATION TUBES Packaging Loose / Bundle / Wooden Pallet / Wooden box-a / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector
SANDVIK COMPATIBLE INSTRUMENTATION TUBES Shipment & Transportation By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes
SANDVIK COMPATIBLE INSTRUMENTATION TUBES Material Test Certificate Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC

Grades SANDVIK COMPATIBLE INSTRUMENTATION TUBES

Grades and standards
The tables show Sandvik's standard grades for hydraulic and instrumentation tubing. Other grades can be offered on request.

Sandvik grade UNS ASTM EN no.
Duplex stainless steels
Sandvik SAF 2507® S32750 - 1.4410
Sandvik SAF 2205™ S31803/S32205 - 1.4462
Sandvik SAF 2304® S32304 - 1.4362
Sandvik grade UNS ASTM EN no.
Nickel alloys and high-alloy austenitic stainless steels
Sanicro® 70 N06600 Alloy 600 -
Sanicro® 60 N06625 Alloy 625 2.4856
Sanicro® 41 N08825 Alloy 825 -
Sanicro® 30 N08800 Alloy 800 1.4558
Sanicro® 28 N08028 - 1.4563
Sandvik 2RK65 N08904 - 1.4539
254 SMO* S31254 - 1.4547
- N04400 - -
- N02200 - -
Sandvik grade UNS ASTM EN no.
Austenitic stainless steels
Sandvik 8R40 S34700/S34709 347/347H 1.4550/1.4912
Sandvik 5R75 S31635 316Ti 1.4571
Sandvik 3R65 S31603/S31600 316L/316 1.4404/1.4401
Sandvik 3R60™ S31603/S31600 316L/316 1.4435/1.4436
Sandvik 6R35 S32100/S32109 321/321H 1.4541/1.4940
Sandvik 3R12 S30403/S30400 304L/304 1.4306/1.4301

METRIC STANDARD SIZE SANDVIK COMPATIBLE INSTRUMENTATION TUBES

Stock standard items: C = Central warehouse (Europe)
OD
mm
WT
mm
Kg/m Sandvik 3R12 Sandvik 3R60™ Sandvik 5R75 Sandvik 254 SMO
3 0.5 0.03 - C - -
3 0.7 0.04 - C - -
6 1.0 0.13 C C C C
6 1.5 0.17 - C C -
8 1.0 0.18 C C C -
8 1.5 0.24 C C C -
8 2.0 0.30 C C - -
10 1.0 0.23 C C C -
10 1.5 0.32 C C C C
10 2.0 0.40 C C C -
12 1.0 0.28 C C C C
12 1.5 0.39 C C C C
12 2.0 0.50 C C C C
14 1.0 0.33 C C - -
14 1.5 0.47 - - C -
14 2.0 0.60 C C C -
15 1.0 0.35 C C - -
15 1.5 0.51 C C C -
15 2 0.65 C C C -
16 1.0 0.38 C C - -
16 1.5 0.54 C C C -
16 2.0 0.70 C C C -
16 2.5 0.85 - C C -
18 1.0 0.43 C C - -
18 1.5 0.62 C C C -
18 2.0 0.80 C C C C
18 2.5 0.97 - - C -
20 1.5 0.69 - C C -
20 2.0 0.90 C C C -
20 2.5 1.09 - C C -
20 3.0 1.28 - - C -
22 1.5 0.77 C C C -
22 2.0 1.00 C C C -
25 1.5 0.77 C - - -
25 2.0 1.15 C C C C
25 2.5 1.41 C C C -
25 3.0 1.65 - C C -
28 1.5 0.88 C C C -
28 2.0 1.15 - C C -
28 2.5 1.60 - C - -
30 2.5 1.72 - C - -
30 3.0 2.03 C C C -
30 4.0 2.60 - C C -
35 2.0 1.65 C C C -
35 2.5 2.03 - - C -
35 3.0 2.40 - C - -
38 2.0 1.80 - C - -
38 3.0 2.63 C C C -
38 4.0 3.41 - C C -
38 5.0 4.13 - C C -
42 2.0 2.00 - C C -
42 3.0 2.93 - C C -
50 5.0 5.63 - C - -

IMPERIAL SIZES OF SANDVIK COMPATIBLE INSTRUMENTATION TUBES

Size OD, mm Tolerances OD, mm Wall thickness, %
Sandvik 3R60™, OD <6 mm, tolerances according to ASTM A632
< 6–4.76 +0.10 / -0 +/-10
< 4.76–2.38 +0.08 / -0 +/-10
< 2.38 +0.05 / -0 +/-10
Size OD, mm Tolerances OD, mm Wall thickness, %
Sandvik 3R60™, OD 6.35-25.4 mm according to EN 10305-1
6.35 - 25.4 +/-0.08 +/-10
Size OD, mm Tolerances OD, mm Wall thickness, %
Sandvik 2RK65™ and Sanicro® 28
≤ 25.4 +/-0.10 +/-10
Size OD, mm Tolerances OD, mm Wall thickness, %
Sandvik SAF 2507® and Sandvik 254 SMO
≤ 19.05 +/-0.13 +/-10

Testing SANDVIK COMPATIBLE INSTRUMENTATION TUBES

Testing of stock standard tubing in straight condition
Sandvik hydraulic and instrumentation tubing are tested according to the standards as follows.

Standard Tests chemical analysis Tensile Hardness Flattening Flaring Corrosion Hydrostatic
EN 10216-5 TC1 S S - S S1) - 4) T 2)
ASTM A269 S - S - S - 5) T 2)
ASTM A213 S 3) S S S S - 5) T 2)
ASTM A789 S 3) S S - S - T 2)
ASTM B668 S S - 6) - S - T 2)
ASTM A632 S S - 6) - S - 5) T

S = Sampling, T = 100%
1) Either flaring or flattening test depending on tube size.
2) Eddy Current or hydrostatic test at option of Sandvik.
3) Also product analysis of a billet or tube from each heat.
4) Sandvik performs EN ISO 3651-2 Method A.
5) Sandvik performs ASTM A262 PrE.
6) Sandvik performs hardness test.

COILED TUBING OF SANDVIK COMPATIBLE INSTRUMENTATION TUBES

Sandvik stainless hydraulic tubes and instrumentation tubes can also be delivered in coils, contributing to reduced installation cost due to:

Fewer connections
Higher degree of materials utilization
Improved system integrity
Metric sizes - standard sizes

(other sizes and lengths can be offered on request)

OD
mm
WT
mm
Single coil length, m Orbital welded length, m
3.0 0.5 400 -
3.0 0.75 400 -
3.0 1.0 400 -
3.5 0.5 400 -
3.5 0.75 400 -
3.5 1.0 350 -
3.5 1.5 280 -
4.0 0.5 350 -
4.0 0.75 350 -
4.0 1.0 300 -
4.0 1.5 230 -
6.0 1.0 594 10,828
6.0 1.0 515 9,399
6.0 1.5 440 8,021
8.0 1.0 424 7,734
8.0 1.2 364 6,635
8.0 1.5 304 5,553
10.0 1.0 330 6,016
10.0 1.2 281 5,127
10.0 1.5 233 4,246
10.0 2.0 182
12.0 1.0 270 4,922
12.0 1.2 229 4,177
12.0 1.5 188 3,437
12.0 2.0 146

OD = outside diameter
WT = wall thickness

Imperial sizes - standard sizes
(other sizes and lengths can be offered on request)

Size, in. Single coil length*, ft Orbital welded length, ft
1/8 x .020 1,300 -
1/8 x .028 1,300 -
1/8 x .035 1,300 -
1/8 x .049 1,300 -
3/16 x .020 1,000 -
3/16 x .028 950 -
3/16 x .035 750 -
3/16 x .049 600 -
1/4 x .035 2.005 36,551
1/4 x .049 1.528 27,864
1/4 x .065 1.256 22,903
3/8 x .035 1.267 23,100
3/8 x .049 941 17,162
3/8 x .065 749 13,661
3/8 x .083 612 11,345
1/2 x .035 927 16,899
1/2 x .049 681 12,411
1/2 x .065 534 9,740
1/2 x .083 427 7,949
5/8 x .035 446 13,313
5/8 x .049 325 9,711
5/8 x .065 253 7,565
5/8 x .083 203 6,112
3/4 x .035 367 10,990
3/4 x .049 266 7,982
3/4 x .063 207 6,187

*Minimum guaranteed length for ASTM 316/316L.

SANDVIK COMPATIBLE INSTRUMENTATION TUBES APPLICATIONS

  • Oil and gas equipments
  • Offshore technology
  • Seawater desalination plants
  • Chemical industry
  • Bridges
  • Storage tanks
  • Medical Industry
  • Civil Engineering
  • Pressure vessels, reactor tanks, and heat exchangers
  • Rotors, impellers and shafts
  • Power plants
  • Petrochemical
  • Shipbuilding industry

SANDVIK COMPATIBLE INSTRUMENTATION TUBES SIZES AVAILABLE IN STOCK

  • 1/4" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 5/16" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 3/8" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 1/2" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 3/4" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 1" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 1-1/4" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 1-1/2" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 1-3/4" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 2" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 2-1/4" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 2-1/2" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 2-3/4" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 3" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 3-1/2" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 4" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 4-1/2" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 5" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge

SUPPLYING SANDVIK COMPATIBLE INSTRUMENTATION TUBES TO COUNTRIES -

We export Sandvik Compatible Instrumentation Tubes to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc

Savoy Piping Inc. is a well known worldwide Exporter of Sandvik Compatible Instrumentation Tubes, Savoy Piping Inc. is committed to provide each and every customer with the highest standard of customer service. We deals in Sandvik Compatible Instrumentation Tubes in India and Overseas, offering a wide range of Sandvik Compatible Instrumentation Tubes.