Delivering High Quality Stainless Steel and Alloy Piping Products — Pipes, Tubes, Fittings, Flanges and more for Global Industries.

sales@savoypipinginc.com
Savoy Piping Inc logo

ASTM A234 WPB Buttweld Fittings

ASTM A234 WPB Buttweld Fittings

ASTM A234 WPB Buttweld Fittings

ASTM A234 WPB Buttweld Fittings butt-weld fittings

Buy ASTM A234 WPB carbon steel buttweld fittings for standard-temperature piping. Related: carbon hub · WPC.

Related: Buttweld hub.

What is ASTM A234 WPB Buttweld Fittings?

A234 WPB is the common carbon steel WP class for wrought butt-weld fittings matched to ASTM A106/A53-type carbon pipe service.

Typical applications

  • Oil & gas and refining piping
  • Chemical and petrochemical process lines
  • Power, water, and industrial utility systems

Selection guidance

Confirm grade, size/schedule, LR/SR and seamless vs welded. Hub: buttweld fittings.

Butt Weld Fitting Specification ASTM A403/ ASTM SA403, ASTM A815 / ASME SA815, ASTM A420 / ASME SA420, ASTM A234 / ASME SA234, ASTM A860 / ASME SA860, ASTM B366 / ASME SB366, DIN 2605 Part 1 / DIN 2605 Part 2, EN10253-2 / EN10253-4 TC1 and TC2
Butt Weld Fittings Manufacturing Process Hot / Cold / Fabricated / Seamless / Welded / Induction
Butt Weld Fittings Other Grades Stainless Steel - 304, 304L, 304H, 310s, 316, 316L, 317L, 321, 347, 904L, 410, 446 etc.
Carbon Steel - WPB, WPC, WPL6, WPHY42, WPHY46, WPHY52, WPHY56, WPHY60, WPHY65 etc.
Alloy Steel - WP5, WP9, WP11, WP22, WP91, 4140, Class 1, 2, 3 etc.
Duplex and Super Duplex - UNS S31803, UNS S32750, UNS S32760 etc.
Inconel - 600, 601, 625, 718, UNS N06600, UNS N06601, UNS N06625, UNS N07718 etc.
Incoloy - 800, 800H, 800HT, 825, UNS N08800, UNS N08810, UNS N08811, UNS N08825 etc.
Monel - 400, UNS N04400 etc.
Hastelloy - C276, C22, UNS N10276, UNS N06022 etc.
Titanium - Grade 2, Grade 3, UNS R50400, UNS R56200 etc.
Copper Nickel - 9/10, 70/30, UNS C71500, UNS C70600 etc.
Other - Alloy 20, SMO 254, UNS N08020, UNS S31254 etc.

EN / DIN
P235GHTC1/2 (St 35.8 I/ III), P265GH, S355J2H
16Mo3 (15Mo3), 10CrMo9-10 (10CrMo910), 13CrMo4-5 (13CrMo44)
X11CrMo5, X11CrMo9-1, X20CrMOV11-1, X10CrMoVNb9-1, X10CrWMoVNb9-2, 7CrMoVTiB10-10
P215NL (TTST35N/V), 12Ni14 (10Ni14)
P355N (StE355), P355NH (WStE355), P355NL1 (TStE355), P355NL2, L29NB (STE 29.7), L360NB (STE 360.7)
1.4301, 1.4306, 1.4362(Lean Duplex), 1.4401, 1.4404, 1.4435, 1.4436, 1.4439, 1.4462(Duplex), 1.4466(Super Duplex), 1.401, 1.4539, 1.441, 1.450, 1.471 1.4841, 1.4878,, 1.4876, 1.4952, 1.4835, 1.4877, 1.4910
Butt Weld Fittings Outer Diameter 1/2" NB TO 48" NB
Butt Weld Fittings Wall Thickness or Schedule Sch 10s to Sch XXS or As Per Custom Requirement
Butt Weld Fittings Types 45° Elbow, 90° Elbow, 180 Degree Elbow, LR Elbow (Long Radius Elbow), SR Elbow (Short Radius Elbow), Equal Tee, Reducing / Unequal Tee, Concentric Reducer, Eccentric Reducer, End Cap, Long Stub End, Short Stub End, Lap Joint Stub End, Equal Cross, Reducing / Unequal Cross, Seamless Fittings, Welded Fittings, 1.5D, 3D, 5D etc.
Butt Weld Fittings Dimension ASME 16.9 - Factory-Made Wrought Buttwelding Fittings
ASME B16.28 - Wrought Steel Buttwelding Short Radius Elbows and Returns
MSS SP-43 - Wrought and fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications
Butt Weld Fittings Other Testing Tensile, Hardness Test, Chemical Analysis – Spectro Analysis, Positive Material Identification – PMI Testing, Flattening Test, Micro and Macro Test, Pitting Resistance Test, Flaring Test, Intergranular Corrosion (IGC) Test, NACE MR0175, Ultrasound Test, ASTM A262 Practice E, Charpy Impact Test, Grain Size, Dye Penetrant Test etc.
Butt Weld Fittings Packaging Crate / Wooden Pallet / Wooden box-a
Butt Weld Fittings Shipment & Transportation By Road - Truck / Train Partial Load, Full Load, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 4 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes
Butt Weld Fittings Material Test Certificate Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS, Indian Boiler Regulations - 1950, IBR Approved, Bureau of Indian Standards BIS Approved Etc.

ASTM A234 WPB Buttweld Fittings

Carbon Steel ASTM A234 WPB Pipe Fittings
Seamless/ Welded 100% Radiography Tested

Products Size
Carbon Steel ASTM A234 WPB Elbow – Long Radius Carbon Steel ASTM A234 WPB Stub Ends Sizes 1/2″ – 48″
Carbon Steel ASTM A234 WPB Elbow – Short Radius Carbon Steel ASTM A234 WPB Cross
Carbon Steel ASTM A234 WPB Reducing Elbow Carbon Steel ASTM A234 WPB Reducing Cross
Carbon Steel ASTM A234 WPB 45° Elbow Carbon Steel ASTM A234 WPB Tees
Carbon Steel ASTM A234 WPB fabricated Tee Carbon Steel ASTM A234 WPB End Cap
Carbon Steel ASTM A234 WPB Reducer Carbon Steel ASTM A234 WPB Seamless Fittings
Carbon Steel ASTM A234 WPB Concentric Reducer Carbon Steel ASTM A234 WPB Pipe Nipple
Carbon Steel ASTM A234 WPB Eccentric Reducer Carbon Steel ASTM A234 WPB 5D Elbow
Carbon Steel ASTM A234 WPB 3D Elbow Carbon Steel ASTM A234 WPB Welded Pipe Fittings

Types Of Grade Carbon Steel Buttweld Fittings

CARBON STEEL BUTTWELD FITTINGS CHEMICAL COMPOSITION

Grade C Mn P S Si Cr Mo Ni Cu V Nb
WPB 0.3 0.29-1.06 0.05 0.058 0.1min 0.4 0.15 0.4 0.4 0.08 0.02
WPC 0.35 0.29-1.06 0.05 0.058 0.1min 0.4 0.15 0.4 0.4 0.08 0.02

Notes:

  • The sum of Cu, Ni, Cr, and Mo shall not exceed 1.00%.
  • The sum of Cr and Mo shall not exceed 0.32%.
  • For each reduction of 0.01% below the specified C maximum, an increase of 0.06% Mn above the specified maximum will be permitted, up to a maximum of 1.35%.
  • The maximum carbon equivalent (C.E.) shall be 0.50, based on heat analysis and the formula C.E.=C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15.

CARBON STEEL BUTTWELD FITTINGS MECHANICAL PROPERTIES

Tensile Requirements WPB WPC
Tensile Strength, min, ksi[MPa] 60-85 70-95
(0.2% offset or 0.5% extension-under-load) [415-585] [485-655]
Yield Strength, min, ksi[MPa] 32 40
[240] [275]

Carbon Steel ASTM A234 WPB Buttweld Fittings Available Types

Carbon Steel Pipe Fittings Carbon Steel WPB Buttweld Pipe Fittings
Carbon Steel A234 WPB Seamless Pipe Fittings Carbon Steel A234 Welded Pipe Fittings
Carbon Steel A234 WPB Pipe Elbow Carbon Steel Buttweld Tee
Carbon Steel Buttweld Reducer Suppliers ANSI WPB Carbon Steel Pipe Fittings
Carbon A234 WPB Stubends Dealer ASTM A234 WPB Pipe Fittings Exporter
Carbon Steel WPB Butt weld Fittings Stockholder Steel WPB Pipe End Cap Distributors
Carbon Steel WPB 45°Elbow A234 WPB 90°. LR Elbow Manufacturer
Carbon Steel Grade WPB Pipe Tee Carbon Steel ASTM A234 WPB Cross
CS WPB Butt weld Reducing Nipple Carbon WPB Short Radius Elbow
ANSI B16.9 ASTM A234 WPB Buttweld Fitting A234 WPB End Pipe Cap Stockist
ASTM A234 WPB Welded Pipe Fittings Carbon Steel ASME SA234 WPB Pipe Fittings

Frequently asked questions

What are ASTM A234 WPB Buttweld Fittings?

ASTM A234 WPB Buttweld Fittings are ASME B16.9 (and related) butt-weld pipe fittings used to change direction, branch, reduce, or close a line with a full-penetration weld.

Which standards apply?

Dimensional: ASME B16.9 / B16.28. Material: ASTM/ASME grade specs (e.g. A403, A234, A420, A860, A815, B366). Confirm edition and WP/WPHY class on the PO.

Seamless or welded fittings?

Both are supplied. Seamless is common for smaller sizes; welded (fabricated) covers larger OD. Match the construction to your piping class.

What should be on the purchase order?

Grade/UNS, fitting type and degree/radius, size/schedule or wall, seamless or welded, standard (B16.9), quantity, MTC (EN 10204 3.1/3.2), and any NACE/PMI/NDT extras.

ASTM A234 WPB Buttweld Fittings Exported Countries

We Export ASTM A234 WPB Buttweld Fittings to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Myanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States Of America, Canada, Mexico, Panama, Costa Rica, Puerto Rico, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherlands, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc

ASTM A234 WPB Buttweld Fittings Supplying in States and Cities

We Supply ASTM A234 WPB Buttweld Fittings Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Mumbai, Navi Mumbai, Pune, Nashik, Nagpur, Solapur, Kolhapur, Ambernath, Ahmednagar, Latur, Ahmadabad, Surat, Rajkot, Vadodara, Panaji, Madgaon, Chennai, Kolkata, Hyderabad, Bengaluru, Delhi, New Delhi, Ludhiana, Chandigarh, Raipur, Bhopal, Jamshedpur, Vishakhapatnam, Cochin, Ghaziabad, Noida, Gurugram, Bhillai, Durgapur, Vijaywada, Kanpur etc.

Savoy Piping Inc., is a well known worldwide Exporter of ASTM A234 WPB Buttweld Fittings, Savoy Piping Inc., is committed to provide each and every customer with the highest standard of customer service. We deal in ASTM A234 WPB Buttweld Fittings in India and Overseas, offering a wide range of ASTM A234 WPB Buttweld Fittings