Delivering High Quality Stainless Steel Sheet, Plate & Coils in ASTM A240 Type 304, 304L, 310s, 316, 316L, 317L, 321, 347, 904L etc.

304 CR Sheets

304 CR Stainless Steel Sheet, SS 304 CR Sheet and Steel Plate, ASTM A240 TP304 Plate, ASME SA240 TP304 Plate, 304 Quality Stainless Steel Plates

304 CR Stainless Steel Plate, Sheets and Coils in Hot Rolled (CR) and Cold Rolled (CR) Conditions No.1 Finish, No.2 Finish, No.2B Finish, No. 8 Finish, BA Finish (Bright Annealed), Satin Finish, Hairline Finish.

304 CR Sheets is one of the most versatile and commonly used stainless steels on the market, Grade 304 hr stainless steel is the most standard used alloy of this type. Essentially, Grade 304 is an austenitic chromium alloy which is also known as an "18/8" stainless as the make-up of the steel is 18% chromium and 8% nickel.

The chromium content promotes the material's considerable resistance to the effects of corrosion and oxidation. The stainless steel alloy resists most oxidizing acids and will withstand ordinary rusting though this does not mean that the steel will not tarnish over time. The steel needs to be cold worked to generate higher tensile strength. For stainless steel sections which are welded heavily, post-weld annealing may be necessary to provide maximum corrosive resistance.

Type 304 and Type 304L have very similar chemical and mechanical properties and are often included on a single material test certificate when the actual properties of a stainless steel plate meet the criteria of both types. This is a very common occurrence. Type 304L is a variation of Type 304 and has a lower carbon content which improves weldability and lowers the risk of reduced corrosion resistance around the weld. Type 304L also has a slightly lower yield and tensile strength than Type 304.

As with most steel plate products a number of different designations are used for these steels. The most common are:

  • Type 304              1.4301 (EN Steel Number)            S30400 (UNS) 
  • Type 304L            1.4307 (EN Steel Number)            S30403 (UNS)

Savoy Piping Inc. is specialist distributor, processor and supplier of stainless steel sheets in grade 201, 304, 304L, 316L, 409, and 430 stainless steels in all finishes. We are suppliers of ASTM A240 Stainless Steel 304/304L Sheets made by world’s leading mills, such as Jindal Stainless Ltd., Outokumpu, POSCO, DKC- Korea, European Mills, NTK- Japan, TISCO, Aperam and others. We can supply cut to size ASTM A240 Stainless Steel 304/304L Sheets, with both narrow and wide widths.

  • Order Large or Small Quantity of ASTM A240 Stainless Steel 304 Sheets
  • Cut to Size ASTM A240 Stainless Steel 304 Sheets Available
  • No Minimum Order Quantity

Categories: Stainless Steel, Stainless Steel 304/304L, Steel Plates, Steel Sheets Tags: 1.4301, 1.4307, 2B Finish, 8K Finish, Dealers, Distributors, Exporters, Jindal Stainless, Manufacturer, Mirror Finish Sheets, No.1 Finish, No.4 Finish, No.8 Finish, S30400, S30403, Stainless Steel 304 Sheets, Stainless Steel 304L Sheets, Stainless Steel Sheet Suppliers, Stainless Steel Sheets, Suppliers

Product Range


Sr. No.
Size (in mm) Thickness Specification Manufacturer
1 1000 x 2000 
1220 x 2440 
(4' x 8')
1250 x 2500 
1500 x 3000 To 6000 
2000 x 4000 To 6000
0.3 mm 
To 
120 mm
A-240 Jindal, Acroni, Columbus, Acerinox, Thysenkrupp, Posco, Aperam, BRG etc.


Sr. No.
Size (in mm) Thickness Specification Manufacturer
1 1000 x 2000 
1220 x 2440 
(4' x 8')
1250 x 2500 
1500 x 3000 To 6000 
2000 x 4000 To 6000
0.3 mm 
To 
120 mm
A-240 Jindal, Acroni, Columbus, Acerinox, Thysenkrupp, Posco, Aperam, BRG etc.
Specifications
Standards Designation
ASTM A 240
ASME SA 240

Composition

Typical compositional ranges for grade 304 CR stainless steels are given in table 1.

Composition Ranges for 304 CR grade stainless steel Sheets & Plates

Grade C Mn Si P S Cr Mo Ni N
304 min.
max.
-
0.08
-
2.0
-
0.75
-
0.045
-
0.030
18.0
20.0
- 8.0
10.5
-
0.10
304L min.
max.
-
0.030
-
2.0
-
0.75
-
0.045
-
0.030
18.0
20.0
- 8.0
12.0
-
0.10
304H min.
max.
0.04
0.10
-
2.0
-
0.75
-0.045 -
0.030
18.0
20.0
- 8.0
10.5
-

Mechanical Properties

Typical mechanical properties for grade 304 CR stainless steels Plates & Sheets are given in table 2.

Mechanical properties of 304 CR grade stainless steel Sheets & Plates

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
304 515 205 40 92 201
304L 485 170 40 92 201
304H 515 205 40 92 201

304H also has a requirement for a grain size of ASTM No 7 or coarser.

Physical Properties

Typical physical properties for annealed grade 304 stainless steels are given in table 3.

Physical properties of 304 CR grade stainless steel in the annealed condition

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (μm/m/°C) Thermal Conductivity (W/m.K) Specific Heat 0-100°C (J/kg.K) Electrical Resistivity (nΩ.m)
0-100°C 0-315°C 0-538°C at 100°C at 500°C
304/L/H 8000 193 17.2 17.8 18.4 16.2 21.5 500 720

Grade Specification Comparison

Approximate grade comparisons for 304 CR stainless steels are given in table 4.

Grade specifications for 304 CR grade stainless steel

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
304 S30400 304S31 58E 1.4301 X5CrNi18-10 2332 SUS 304
304L S30403 304S11 - 1.4306 X2CrNi19-11 2352 SUS 304L
304H S30409 304S51 - 1.4948 X6CrNi18-11 - -

These comparisons are approximate only. The list is intended as a comparison of functionally similar materials not as a schedule of contractual equivalents. If exact equivalents are needed original specifications must be consulted.

Possible Alternative Grades
Possible alternative grades to grade 304 CR stainless steels are given in table 5.

Possible alternative grades to 304 CR grade stainless steel

Grade Why it might be chosen instead of 304
301L A higher work hardening rate grade is required for certain roll formed or stretch formed components.
302HQ Lower work hardening rate is needed for cold forging of screws, bolts and rivets.
303 Higher machinability needed, and the lower corrosion resistance, formability and weldability are acceptable.
316 Higher resistance to pitting and crevice corrosion is required, in chloride environments
321 Better resistance to temperatures of around 600-900°C is needed…321 has higher hot strength.
3CR12 A lower cost is required, and the reduced corrosion resistance and resulting discolouration are acceptable.
430 A lower cost is required, and the reduced corrosion resistance and fabrication characteristics are acceptable.

OTHER GRADES OF STAINLESS STEEL 304 / 304L SHEETS PLATES

  • Stainless Steel 304 CR Sheets Plates
  • Stainless Steel 304L CR Sheets Plates
  • SS 304 Sheets Plates
  • SS 304L Sheets
  • Stainless Steel UNS S30400 Plates
  • SS UNS S30403 Sheets Plates
  • Stainless Steel Din 1.4306 Plates
  • SS Din 1.4307 Sheets

304 CR Stainless Steel Plates and Sheets Packing

304 CR Stainless Steel Plates and Sheets is sleeved into plastic bag individually, pieces wrapped with water-proof material, bundled with nylon rope. Clear labels are tagged on the outside of the package for easy identification of the quantity and product I.D. Great care is taken during operation and transportation. SS 304 Stainless Steel Plate packing will be according to international standard in bundles strapped by strips then into containers to avoid any damage.

Delivery: Within 10-25 days or asap if we have enough stock

Types of Packaging:

  • - Bundles (hexagonal)
  • - Wooden box-aes
  • - Crates (steel/wooden)
  • - Special crates for U-Bend tubes with each radius separated
  • - Packaging for SS 304 Stainless Steel Plate ASTM A240 as per customer's requirements

Special Features:

  • - Each bundle covered with plastic for protection against extreme weather.
  • - End of 304 Stainless Steel Plate protected by plastic Strip.
  • - Bundles strapped with plastic strips.
  • - Each radius of U-Bend tube separated by a separator.
  • - Packaging list (laminated) placed with box-a/crate.

Stockholder, Suppliers of Stainless Steel 304/304L cr Sheets

“Yes, It’s in Stock and Ready to Deliver”
High Quality, Lower Cost But The Best Service in Steel Plates

304 cr Stainless Steel Plates and Sheets Available with Stock Sizes:

  • 0.2 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 0.3 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 0.4 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 0.8 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 1 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 1.65 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 2.11 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 3.1 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 04 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 05 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 06 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 08 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 10 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 12 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 15 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 16 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 18 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 20 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 22 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 25 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 28 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 30 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 32 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 35 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 36 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 38 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 40 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 42 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 45 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 50 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 52 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 60 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 62 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 65 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 70 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 80 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 90 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 100 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 110 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 120 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 120 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet

Ready Inventory at Savoy Piping Inc.:

We export 304 cr Stainless Steel Plates and Sheets to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bacrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States Of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East. etc.

Savoy Piping Inc. is a well known worldwide exporter of 304 cr Stainless Steel Plates and Sheets, Savoy Piping Inc. is committed to provide each and every customer with the highest standard of customer service. We deals in 304 cr Stainless Steel Plates and Sheets in India & Overseas, offering a wide range of 304 cr Stainless Steel Plates and Sheet.

Savoy Piping Inc. is Leading Manufacturer, Distributor, Exporter, Stockholder and Supplier of304 Stainless Steel Plates and Sheets in United States of America (USA), Saudi Arabia, Iran, Iraq, United Arab Emirates (UAE), Singapore, Malaysia, Indonesia

Stainless Steel 304 Sheets Plates, Stainless Steel 304L Sheets Plates, SS 304 Sheets Plates, SS 304L Sheets, Stainless Steel UNS S30400 Plates, SS UNS S30403 Sheets Plates, Stainless Steel Din 1.4306 Plates, SS Din 1.4307 Sheets