Delivering High Quality Stainless Steel Sheet, Plate & Coils in ASTM A240 Type 304, 304L, 310s, 316, 316L, 317L, 321, 347, 904L etc.
Savoy Piping Inc Logo, Stainless Steel Plates, Sheets, Coils Supplier

Stainless Steel Coil

Stainless steel, also known as inox steel, is a steel alloy with a minimum of 10.5 or 11% chromium content by mass. Stainless steel does not stain, corrode, or rust as easily as ordinary steel, but it is not stain-proof.

Stainless Steel Coil - Content

Stainless Steel Coils, Stainless Coils, Hot Rolled Stainless Steel Coils, Cold Rolled Stainless Steel Coils, SS Steel Coil, HR Coil, CR Coil, Stainless Steel, BIS Approved in Grade 304, 304L, 309, 309s, 310, 310s, 316, 316L, 317L, 321, 321H, 347, 347H, 904L etc.

ASTM A240 Stainless Steel Coils in Hot Rolled and Cold Rolled with Surface Finish Like Mill Finish, No.1, 2B, 2D, No.4, No.8, Mirror, Brush, Hairline etc. with NACE MR O1-75, Intergranular Corrosion Test A262 Practice E, Mercury Free in Width of 1250 / 1500 / 2000 mm and Custom Size from 0.6 to 80 mm Thickness.

Stainless Steel Coil Definition

Stainless Steel, also known as inox steel, is a steel alloy with a minimum of 10.5 or 11% chromium content by mass.

Stainless steel Coil does not stain, corrode, or rust as easily as ordinary steel, but it is not stain-proof.

The term 'corrosion resistant steel' is used when the alloy has less than the 12% minimum of chromium, for example in the aviation industry. There are different grades and surface finishes of stainless steel, depending on where it will be used. Stainless steels have a higher resistance to oxidation (rust) and corrosion in many natural and man-made environments; however, it is important to select the correct type of stainless steel for the use. There are over 150 grades of stainless steel, of which fifteen are the most used.


Savoy Piping Inc., are recognized as the prominent Manufacturer, Trader and Supplier of a broad assortment of Stainless Steel Coils. The offered steel coil is designed with utmost precision in conformity with the international quality standards.

An ISO 9001:2008 Certified Company, Savoy Piping Inc.,, is a leading Stockholder, Supplier and Exporter of ASTM A240 Stainless Steel Coil. Stainless Steel Coils are cut to your specifications and supplied with complete set of mill test reports. Custom length and width up to 2000 mm can be made available. Exports is Our Specialty! and we can source many hard to find grades and or non-standards sizes to meet the special requirements of our customers. All ASTM SS Steel Coil can be cut to size with the help of our extensive expertise in processing steel Coil products.


Our stock of Stainless Steel Coil includes thickness of 6mm up to 80mm with width of 1250mm, 1500mm, 2000mm.


  • Order Large or Small Quantity of ASTM A240 Type 304, 304L, 310s, 316, 316L Stainless Steel Coil
  • Cut to Size ASTM A240 317L, 321, 347, 904L Stainless Steel Coil Available
  • No Minimum Order Quantity for Stainless Steel Coil Order
  •  

    Stainless Steel Coil| Steel Coil| SS Coil| HR Coil| CR Coil| Stainless Steel Coil Stockholder| Stainless Coil Manufacturer| ASTM A240 Type 304, 304l, 309, 310, 316, 316l, 317l, 321, 347

    Stainless Steel Coil Range

    Stainless Steel Coil Specification ASTM A240 / ASME SA240
    Stainless Steel Coil Manufacturing Process Hot Rolled (HR) / Cold Rolled (CR)
    Stainless Steel Coil Grades 202 / 304 / 304L / 304H / 309S / 310S / 316 / 316L / 316Ti / 317L / 321 / 321H / 347 / 347H / 904L etc.
    UNS No. - UNS S30400, UNS S30403, UNS S31008, UNS S31620, UNS S31603, UNS S31603, UNS S31635, UNS S31703, UNS S32100, UNS S34700, UNS S34709, UNS S8904
    EN No. - 1.4301, 1.4307, 1.4845, 1.4401, 1.4404, 1.4571, 1.4438, 1.4541, 1.4550, 1.4551, 1.4539
    Stainless Steel Coil Thickness 0.6 MM TO 80 MM THICKNESS
    Stainless Steel Coil Width 1250 MM / 1500 MM / 2000 MM / 04 Feet / 05 Feet and Custom Cut Width as Per Requirement
    Stainless Steel Coil Length 2400 MM / 2420 MM / 6000 MM / 08 Feet / 10 Feet / Coil Cut and Custom Cut Length as Per Requirement
    Stainless Steel Coil Surface Finish 2B, 2D, BA, MATT, MATT PVC, No.4, No.5, SB, HR, No.8, Mirror, Hairline, Brush, Textured, Oil base wet Polished, Both sides Polished available.
    Stainless Steel Coil Coating PVC coating Normal / Laser, Film: 100 micrometer, Color: black/white.
    Stainless Steel Coil Other Testing NACE MR0175, Ultrasoung TEST, IGC TEST, Intergranular Corrrosion Test as per ASTM A262 Practice E, Charpy Impact Test, Macro, Grain Size, Hardness, etc.
    Stainless Steel Coil Value Added Services Gas Cutting / CNC Plasma Cutting / Profiling / Rolling / Bending / Sheet Metal Fabrication / Drill / Punch / Machining / Sand Blasting / Shot Blasting / Heat Treatment
    Stainless Steel Coil Packaging Loose / Carrate / Wooden Pallet / Wooden Box / Plastic Cloth Wraps
    Stainless Steel Coil Shipment & Transportation By Road - Truck / Train Partial Load, Full Load, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes
    Stainless Steel Coil Material Test Certificate Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS, Bureau of Indian Standards BIS Approved ETC

    Stainless Steel Coil Chemical Compostion and Properties

    The chemical composition of grade Stainless Steel is outlined in the following table

    Designation Chemical composition % by mass max unless stated
    UNS No SAE No AISI No / Common Name C Si Mn P S Cr Mo Ni Others
    S30100 30301 301 0.15 1.00 2.00 0.045 0.030 16.0/18.0 - 6.0/8.0 N 0.10
    S30103 - 301L 0.03 1.00 2.00 0.045 0.030 16.0/18.0 - 6.0/8.0 N 0.20
    S30153 - 301LN 0.03 1.00 2.00 0.045 0.030 16.0/18.0 - 6.0/8.0 N 0.07/0.20
    S30200 30302 302 0.15 0.75 2.00 0.045 0.030 17.0/19.0 - 8.0/10.0 N 0.10
    S30215 30302B 302B 0.15 2.00/3.00 2.00 0.045 0.030 17.0/19.0 - 8.0/10.0 -
    S30300 30303 303 0.15 1.00 2.00 0.20 0.15 min 17.0/19.0 8.0/10.0  
    S30310 - XM-5 (303Plus x) 0.15 1.00 2.50/4.50 0.20 0.25 min 17.00/19.00 - 7.00/9.00 -
    S30323 30303Se 303Se 0.15 1.00 2.00 0.20 0.060 17.0/19.0 - 8.0/10.0 Se 0.15 min
    S30330 - 303Cu 0.15 1.00 2.00 0.15 0.10 min 17.0/19.0 - 6.0/10.0 Cu 2.5/4.0; Se 0.10
    S30400 30304 304 0.07 0.75 2.00 0.045 0.030 17.5/19.5 - 8.0/10.5 N 0.10

    S30400 A276 for bar

    30304 304 0.08 1.00 2.00 0.045 0.030 18.0/20.0   8.0/11.0  
    S30403 30304L 304L 0.030 0.75 2.00 0.045 0.030 17.5/19.5 - 8.0/12.0 N 0.10
    S30403 A276 for bar
    30304L 304L 0.030 1.00 2.00 0.045 0.030 18.0/20.0   8.0/12.0  
    S30430 - 302HQ 0.03 1.00 2.00 0.045 0.030 17.0/19.0 - 8.0/10.0 Cu 3.0/4.0
    S30452 - XM-21 (304HN) 0.08 1.00 2.00 0.045 0.030 18.0/20.0 - 8.00/10.00 N 0.16/0.30
    S30453 - 304LN 0.030 0.75 2.00 0.045 0.030 18.0/20.0 - 8.0/12.0 N 0.10/0.16
    S30454 - - 0.03 1.00 2.00 0.045 0.030 18.0/20.0 - 8.0/11.0 N 0.16/0.30
    S30500 30305 305 0.12 0.75   2.00 0.045 0.030 17.0/19.0 - 10.5/13.0 -
    S30800 30308 308 0.08 1.00 2.00 0.045 0.030 19.0/21.0 - 10.0/12.0 -
    S31600 30316 316 0.08 0.75 2.00 0.045 0.030 16.0/18.0 2.00/3.00 10.0/14.0 N 0.10 
    S31603 30316L 316L 0.030 0.75  2.00 0.045 0.030 16.0/18.0 2.00/3.00 10.0/14.0 N 0.10
    S31635 - 316Ti 0.08 0.75 2.00 0.045 0.030 16.0/18.0 2.00/3.00 10.0/14.0

    Ti 5x (C+N) / 0.70

    N 0.10

    S31640 - 316Cb 0.08 0.75 2.00 0.045 0.030 16.0/18.0 2.00/3.00 10.0/14.0

    Nb 10x C / 1.10

    N 0.10

    S31653 - 316LN 0.030 0.75 2.00 0.045 0.030 16.0/18.0 2.00/3.00 10.0/14.0 N 0.10/0.16
    S31700 30317 317 0.08 0.75 2.00 0.045 0.030 18.0/20.0 3.0/4.0 11.0/15.0 N 0.10
    S31703 - 317L 0.030 0.75 2.00 0.045 0.030 18.0/20.0 3.00/4.00 11.0/15.0 N 0.10
    S31725 - 317LM 0.030 0.75 2.00 0.045 0.030 18.0/20.0 4.0/5.0 13.5/17.5 N 0.20
    S31726 - 317LMN 0.030 0.75 2.00 0.045 0.030 17.0/20.0 4.0/5.0 13.5/17.5 N 0.10/0.20
    S31753 - 317LN 0.030 0.75 2.00 0.045 0.030 18.0/20.0 3.0/4.0 11.0/15.0 N 0.10/0.22
    S32100 30321 321 0.08 0.75 2.00 0.045 0.030 17.0/19.0 - 9.0/12.0

    Ti 5 x C min/0.70

    N 0.10

    S34700 30347 347 0.08 0.75 2.00 0.045 0.030 17.0/19.0 - 9.0/13.0 Nb+Ta 10 x C min/1.0
    S34720 - 347F 0.08 1.00 2.00 0.040 0.18/0.35 17.00/19.00 0.75 9.00/12.00 Nb 10xC / 1.10; Cu 0.75; Ta 0.05
    S34723 - 347FSe 0.08 1.00 2.00 0.11/0.17 0.030 17.00/19.00 0.75 9.00/12.00 Nb 10xC / 1.10; Cu 0.75; Se 0.15/0.35; Ta 0.05
    S34800 30348 348 0.08 0.75 2.00 0.045 0.030 17.0/19.0 - 9.00/13.0 Nb+Ta 10 x C / 1.00; Ta:0.10 max; Co 0.20
    S38400 30384 384 0.04 1.00 2.00 0.045 0.030 15.0/17.0 - 17.0/19.0 -

    Stainless Steel Coil Mechanical and Physical Properties

    The mechanical properties of grade Stainless Steel Coil are displayed in the following table.

    S.S.
    200 202 301 302 303 304 304L 309 309s 310 310s 314 316 316L 317 321 347
    Tensile
    Strength
    105 105 110 90 90 85 60 90 90 95 95 100 85 78 90 87 92
    Yield
    Strength
    55 55 40 37 35 35 30 40 40 40 40 50 35 30 40 35 35
    Elongation
    in 2'
    55 55 60 55 50 55 55 45 45 45 45 45 55 55 50 55 50
    Rockwell 90 90 85 82 84 80 76 85 85 87 87 87 80 76 85 80 84
    Brinell 185 185 165 155 160 150 140 165 165 170 170 170 150 145 160 150 160
    En58M En58E En58J&H En58C
    X12
    CrNi17.7
    X2
    CrNi18.8
    X5
    CrNi18.9
    X5
    CrNi18.8
    x5
    CrNiMo18.12
    X2
    CrNiMo19.1
    X10
    CrNiMo18.9
    AUST. AUST. AUST. AUST. AUST. AUST. AUST. AUST. AUST. AUST. AUST. AUST. AUST. AUST. AUST. AUST.

    The Physical properties of grade Stainless Steel Coil are displayed in the following table.

    S.S.Grade 201 202 301 302 304 304L 309 309S 310 310S 316 316L 321 347 409 430 434 410
    Density 7.9 7.9 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 7.7 7.8 7.8 7.8
    Sp.Elec. Resist 20C micro 72 72 72 72 72 72 78 78 78 78 74 74 72 73 60 60 60 57
    Sp. Heat (0-100c) 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 46 46 46 46
    Ther. Conductivity 16.3 16.3 16.3 16.3 16.3 16.3 14.2 14.2 14.2 14.2 16.3 16.3 16.3 16.3 25.1 26.0 26.0 25.1
    15.7 18.4 17.0 17.2 17.3 17.3 15.0 15.0 15.9 15.9 15.9 15.9 16.6 16.6 11.7 10.4 11.9 9.9
    Mild water X X X X X X X X X X X X X X X X X X
    Industrial X X X X X X X X X X X X X X X X
    Marine X X X X X X X X X X X X X X X
    Salt Water X X
    Mild X X X X X X X X X X X X X X X X X X
    Oxidising X X X X X X X X X X X X X X X X
    Reducing X X
    Abrasion Resistance Good Good Good Good Good Good Good Good Good Good Good Good Good Good Good Good Good Good
    Cold Forming Fair Good Good Excel Excel Good Good Good Good Good Good Good Good Good Fair Fair Fair Fair
    Weldability Good Good Excel Excel Excel Excel Good Excel Good Excel Excel Excel Excel Excel Fair Fair Fair Fair
    Melting Flange 1400 1420 1400 1450 1370 1400 1400 1430 1430 1510 1480 1530
    Scaling Temp 800 800 800 900 900 900 1100 1100 1100 1100 900 900 900 900 700 800 800 700

    Stainless Steel Coil Coil Price

    Stainless Steel Coil Manufacturer Name and Origin

    Stainless Steel Coil is in Ready Stock and Ready to Deliver. High Quality, Lower Cost But Best Service in Steel Coil

    Stainless Steel Coil

    Application

    • Automotive
    • Railway & Transport
    • Architecture, Building & Construction
    • Chemical & Petrochemical Industries
    • Pharmaceutical
    • Energy and Power
    • Oil and Gas Industries
    • Kitchenware and Food Processing Industries
    • Plumbing And Overhead Water Tanks

    Stainless Steel Coil Available Offer and Discounts

    Buy Now Stainless Steel Coil at an Attactive Discounted Price, Order Above USD $ 25000 are Eligible of 2% Discount. We Offer Free Insurance and Best Shipping Rates. Our Prices are Always More Competitive and without any compromise in Quality of the Material.

    Stainless Steel Coil Available Thickness, Width and Length










    Stainless Steel Coil Packing Shipment

    Stainless Steel Coil is Covered with Plastic Cloth and Packed in Wooden Box, Wooden Pallet and Wooden Fumigated Carrate. Our Packaging is Fully Waterproof and Safe for Transport with Proper Strips on Wooden Box, having Lifting Point.

    Stainless Steel Coil Exported Countries

    We Export Stainless Steel Coil to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen , Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States Of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc

    Stainless Steel Coil Supplying in States and Cities

    We Supply Stainless Steel Coil Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Mumbai, Navi Mumbai, Pune, Nashik, Nagpur, Solapur, Kolhapur, Ambernath, Ahmednagar, Latur, Ahmadabad, Surat, Rajkot, Vadodara, Panaji, Madgaon, Chennai, Kolkata, Hyderabad, Bengaluru, Delhi, New Delhi, Ludhiana, Chandigarh, Raipur, Bhopal, Jamshedpur, Vishakhapatnam, Cochin, Ghaziabad, Noida, Gurugram, Bhillai, Durgapur, Vijaywada, Kanpur etc.


    Savoy Piping Inc., is a well known worldwide Exporter of Stainless Steel Coil, Savoy Piping Inc., is committed to provide each and every customer with the highest standard of customer service. We deals in Stainless Steel Coil in India and Overseas, offering a wide range of Stainless Steel Coil


    Stainless Steel Coil, SS Coil, ASTM A240 Type 304, 304L, 310s, 316, 316L, 317L, 321, 347, 904L
    Jindal, Outokompu, Aperam, Columbus, BRG, Acroni, Acerinox, TISCO
    Most Relevant and Trusted Supplier of Stainless Steel Coil Worldwide Based in Mumbai, India. ASTM A240 304, 304L, 310s, 316, 316L, 317L, 321, 347, 904L Stainless Steel Coil

    Supplying Countries & Cities

    UAE, Bahrain, Italy, Indonesia, Malaysia, USA, Singapore, Philippines, Mexico, China, Brazil, Peru, Nigeria, Kuwait, Jordan, Oman, Muscat, Dubai, Thailand, Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, South Africa, Kazakhstan, Saudi Arabia, Algeria, Angola, Congo, Kenya, Sudan, Poland

    Mumbai, Delhi, Bangalore, Hyderabad, Ahmedabad, Chennai, Kolkata, Surat, Pune, Indore, Thane, Bhopal, Vadodra, Nashik, Faridabad, Rajkot, Ranchi, Coimbatore, Raipur, Mysore, Bhubaneswar, Salem, Bhilai, Kochi, Bhavnagar, Siliguri, Visakhapatnam

    Savoy Piping Inc.

    429 Ground Floor Ahmed Building,
    Pathe Bapurao Marg, Opp Islampura Street,
    Mumbai - 400004. Maharashtra. INDIA


    Tel: +91 022 2387 1062

    Cell: +91 98198 68798


    Email: sales@savoypipinginc.com

    Web: www.savoypipinginc.com


    ISO 9001
    ISO 14001
    OHSAS 18001
    PED-97/23/EC