ASTM A240 316 / 316L dual
ASTM A240 316 / 316L dual plate — S31600 / S31603
If the PO says ASTM A240 and grade 316 / 316L dual, you are in the right place. We supply that chemistry as sheet, plate and coil — this page focuses on plate.
Plain grade hub (non-ASTM URL): 316 / 316L dual flats. Category map: sheet & plate hub · ASTM A240 multi-grade.
In plain terms
Dual-certified 316 / 316L covers both ASTM A240 types in one stock item when either call-out is acceptable.
When it makes sense
Use dual when purchasing wants one line. Single marks: 316 · 316L.
How to order without back-and-forth
Write ASTM A240, 316 / 316L dual (S31600 / S31603), form (plate), thickness, size, finish, quantity and destination. Email sales@savoypipinginc.com.
By form
Sheet, plate and coil in this grade
Finishes
Mill finishes buyers ask for
Related ASTM grades
Nearby chemistries under A240
Product Range
Sr. No.
|
Size (in mm) |
Thickness
|
Specification
|
Manufacturer |
| 1 |
1000 x 2000
1220 x 2440
(4' x 8')
1250 x 2500
1500 x 3000 To 6000
2000 x 4000 To 6000 |
0.3 mm To 120 mm |
A - 240 |
Jindal
Sail
Shah Alloys
Imported Etc. |
| Specifications |
|
|
| Standards |
Designation |
| ASTM |
A 240 |
| ASME |
SA 240 |
Composition
Typical compositional ranges for grade 316 stainless steels are given in table 1.
Composition Ranges for 316/316l grade stainless steel Sheets & Plates
| Grade |
C |
Mn |
Si |
P |
S |
Cr |
Mo |
Ni |
N |
| 304 |
min.
max. |
-
0.08 |
-
2.0 |
-
0.75 |
-
0.04 |
-
0.030 |
18.0
20.0 |
- |
8.0
10.5 |
-
0.10 |
| 304L |
min.
max. |
-
0.030 |
-
2.0 |
-
0.75 |
-
0.04 |
-
0.030 |
18.0
20.0 |
- |
8.0
12.0 |
-
0.10 |
| 304H |
min.
max. |
0.04
0.10 |
-
2.0 |
-
0.75 |
-0.04 |
-
0.030 |
18.0
20.0 |
- |
8.0
10.5 |
- |
Mechanical Properties
Typical mechanical properties for grade 316 stainless steels Plates & Sheets are given in table 2.
Mechanical properties of 316/316l grade stainless steel Sheets & Plates
| Grade |
Tensile Strength (MPa) min |
Yield Strength 0.2% Proof (MPa) min |
Elongation (% in 50mm) min |
Hardness |
| Rockwell B (HR B) max |
Brinell (HB) max |
| 304 |
515 |
205 |
40 |
92 |
201 |
| 304L |
485 |
170 |
40 |
92 |
201 |
| 304H |
515 |
205 |
40 |
92 |
201 |
304H also has a requirement for a grain size of ASTM No 7 or coarser.
Physical Properties
Typical physical properties for annealed grade 316 stainless steels are given in table 3.
Physical properties of 316/316l grade stainless steel in the annealed condition
| Grade |
Density (kg/m3) |
Elastic Modulus (GPa) |
Mean Coefficient of Thermal Expansion (μm/m/°C) |
Thermal Conductivity (W/m.K) |
Specific Heat 0-100°C (J/kg.K) |
Electrical Resistivity (nΩ.m) |
| 0-100°C |
0-315°C |
0-538°C |
at 100°C |
at 500°C |
| 304/L/H |
8000 |
193 |
17.2 |
17.8 |
18.4 |
16.2 |
21.5 |
500 |
720 |
Grade Specification Comparison
Approximate grade comparisons for 316 stainless steels are given in table 4.
Grade specifications for 316/316l grade stainless steel
| Grade |
UNS No |
Old British |
Euronorm |
Swedish SS |
Japanese JIS |
| BS |
En |
No |
Name |
| 304 |
S30400 |
304S31 |
58E |
1.4301 |
X5CrNi18-10 |
2332 |
SUS 304 |
| 304L |
S30403 |
304S11 |
- |
1.4306 |
X2CrNi19-11 |
2352 |
SUS 304L |
| 304H |
S30409 |
304S51 |
- |
1.4948 |
X6CrNi18-11 |
- |
- |
These comparisons are approximate only. The list is intended as a comparison of functionally similar materials not as a schedule of contractual equivalents. If exact equivalents are needed original specifications must be consulted.
Possible Alternative Grades
Possible alternative grades to grade 316 stainless steels are given in table 5.
Possible alternative grades to 316/316l grade stainless steel
| Grade |
Why it might be chosen instead of 304 |
| 301L |
A higher work hardening rate grade is required for certain roll formed or stretch formed components. |
| 302HQ |
Lower work hardening rate is needed for cold forging of screws, bolts and rivets. |
| 303 |
Higher machinability needed, and the lower corrosion resistance, formability and weldability are acceptable. |
| 316 |
Higher resistance to pitting and crevice corrosion is required, in chloride environments |
| 321 |
Better resistance to temperatures of around 600-90°C is needed…321 has higher hot strength. |
| 3CR12 |
A lower cost is required, and the reduced corrosion resistance and resulting discolouration are acceptable. |
| 430 |
A lower cost is required, and the reduced corrosion resistance and fabricantion characteristics are acceptable. |
OTHER GRADES OF STAINLESS STEEL 316 / 316L SHEETS PLATES
Stainless Steel 316 Sheets Plates
Stainless Steel 316L Sheets Plates
SS 304 Sheets Plates
SS 304L Sheets
Stainless Steel UNS S30400 Plates
SS UNS S30403 Sheets Plates
Stainless Steel Din 1.4306 Plates
SS Din 1.4307 Sheets
Frequently asked questions
What is ASTM A240 316 / 316L dual?
ASTM A240 316 / 316L dual (S31600 / S31603) is stainless flat product ordered to the A240 / SA240 specification for plate, sheet and strip.
Do you supply 316 / 316L dual as plate?
Yes — we quote 316 / 316L dual in sheet, plate and coil. This page focuses on plate.
What should I put on the enquiry?
ASTM A240, grade 316 / 316L dual, form, thickness, size, finish, quantity and destination. Email sales@savoypipinginc.com.
316/316l Stainless Steel Plates and Sheets Packing
316/316l Stainless Steel Plates and Sheets is sleeved into plastic bag individually, pieces wrapped with water-proof material, bundled with nylon rope. Clear labels are tagged on the outside of the package for easy identificantion of the quantity and product I.D. Great care is taken during operation and transportation. SS 304 Stainless Steel Plate packing will be according to international standard in bundles strapped by strips then into containers to avoid any damage.
Delivery: Within 10-25 days or asap if we have enough stock
Types of Packaging:
- Bundles (hexagonal)
- Wooden box-aes
- Crates (steel/wooden)
- Special crates for U-Bend tubes with each radius separated
- Packaging for SS 304 Stainless Steel Plate ASTM A240 as per customer's requirements
Special Features:
- Each bundle covered with plastic for protection against extreme weather.
- End of 316 Stainless Steel Plate protected by plastic Strip.
- Bundles strapped with plastic strips.
- Each radius of U-Bend tube separated by a separator.
- Packaging list (laminated) placed with box-a/crate.
Stockholder, Suppliers of Stainless Steel 316/316L Sheets
“Yes, It’s in Stock and Ready to Deliver”
High Quality, Lower Cost But The Best Service in Steel Plates
304 Stainless Steel Plates and Sheets Available with Stock Sizes:
- 0.2 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 0.3 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 0.4 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 0.8 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 1 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 1.65 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 2.11 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 3.1 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 04 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 05 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 06 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 08 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 10 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 12 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 15 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 16 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 18 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 20 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 22 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 25 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 28 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 30 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 32 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 35 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 36 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 38 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 40 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 42 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 4 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 50 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 52 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 60 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 62 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 65 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 70 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 80 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 9 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 100 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 110 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 120 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
- 120 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
We export 316/316l Stainless Steel Plates to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Myanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States Of America, Canada, Mexico, Panama, Costa Rica, Puerto Rico, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherlands, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc.
Savoy Piping Inc. is a well known worldwide exporter of 316/316l Stainless Steel Plates, Savoy Piping Inc. is committed to provide each and every customer with the highest standard of customer service. We deal in 316/316l Stainless Steel Plates in India & Overseas, offering a wide range of 316/316l Stainless Steel Plates.
Savoy Piping Inc. is Leading Manufacturer, Distributor, Exporter, Stockholder and Supplier of 316 Stainless Steel Plates in United States of America (USA), Saudi Arabia, Iran, Iraq, United Arab Emirates (UAE), Singapore, Malaysia, Indonesia
Stainless Steel 316 Plates, Stainless Steel 316L Plates, SS 316 Plates, Stainless Steel UNS S30400 Plates, SS UNS S30403 Plates, Stainless Steel Din 1.4306 Plates, SS Din 1.4307 Sheets
