Delivering High Quality Stainless Steel and Alloy Piping Products — Pipes, Tubes, Fittings, Flanges and more for Global Industries.
sales@savoypipinginc.com
Delivering High Quality Stainless Steel and Alloy Piping Products — Pipes, Tubes, Fittings, Flanges and more for Global Industries.
sales@savoypipinginc.com
| Choose | When | Watch-outs |
|---|---|---|
| ASTM B829 | General requirements for nickel alloy seamless pipe & tube | Usually ordered with a product spec (B167 / B444), not alone |
| Product spec pipe | Typically ASTM B167 for 600/601 pipe | Put BOTH specs on the PO when required |
| Inconel hub | 600 / 601 / 625 family | Do not dual-cert across grades |
ASTM B829 + B167 Inconel 600 seamless pipe Size: ____ Wall: ____ Qty: ____ Condition: ____ MTC: 3.1/3.2 Destination: ____
Email sales@savoypipinginc.com with destination and any NACE / TPI notes.
Savoy Piping Inc. supplies Inconel 600 seamless pipe — Ni-Cr alloy for high-temperature oxidation and general corrosion resistance.
Ni-Cr alloy for high-temperature oxidation and general corrosion resistance.
Use 601 for stronger oxidation resistance; 625 for higher strength/corrosion breadth.
| ASTM B829 Inconel Pipes Specification | ASTM B163 / ASTM B167 / ASTM B444 / ASTM B829 / ASME SB163 / ASME SB167 / ASME SB444 / ASME SB829 |
| ASTM B829 Inconel Pipes Grades | ASTM B829 Inconel 600 (UNS N06600) seamless pipe — general requirements companion to B167/B444 product specs |
| ASTM B829 Inconel Pipes Type | Cold Drawn / Welded / ERW |
| ASTM B829 Inconel Pipes Outer Diameter Size | Seamless - 1/4" NB to 6" NB (Nominal Bore Size) Welded / ERW- 1" NB to 16" NB (Nominal Bore Size) |
| ASTM B829 Inconel Pipes Wall Thickness | Schedule 10 to Schedule 160 |
| ASTM B829 Inconel Pipes Length | 5 to 7 Meters, 09 to 13 Meters, Single Random Length, Double Random Length And Customize Size. |
| ASTM B829 Inconel Pipes Ends | Plain Ends / Beveled Ends |
| ASTM B829 Inconel Pipes Delivery Conditions | As Rolled, Cold Drawn, Hot Finish, Stress Relieved, Annealed, Hardened, Tempered |
| ASTM B829 Inconel Pipes Coating | Electropolish, Mechanical Polish, Satin Finish, Passivated |
| ASTM B829 Inconel Pipes Other Testing | NACE MR0175, Hardness Test, Flare, Hydrostatic Test, Eddy Current test, Grain Size Test, Eddy Current, Annealed, Tempered, Stress Relieved etc. |
| ASTM B829 Inconel Pipes Dimension | All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM And ASME |
| ASTM B829 Inconel Pipes Value Added Services | Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Heat Treatment |
| ASTM B829 Inconel Pipes Packaging | Loose / Bundle / Wooden Pallet / Wooden box-a / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector |
| ASTM B829 Inconel Pipes Shipment & Transportation | By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 4 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes |
| ASTM B829 Inconel Pipes Material Test Certificate | Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC |
Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N0669, N06693, N0625, N0604, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and Tube
This specification contains various requirements that, with the exception of Sections 5 and 10, are mandatory requirements to the following ASTM nickel and nickel alloy, seamless pipe and tube specifications:
1.2 One or more of the test requirements of Section 5 apply only if specifically stated in the product specification or in the purchase order.
1.3 In case of conflict between a requirement of the product specification and a requirement of this general specification, only the requirement of the product specification needs to be satisfied.
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.Keywords
Nickel - Nickel Alloys - Seamless Nickel Alloy Pipes - Seamless Nickel Alloy Tubes - Seamless Pipes and Tubes
The chemical composition of Inconel Alloy 600 is provided in the table below:
| Ni + Co | Cr | Fe | C | Mn | S | Si | Cu |
| 72.0 min | 14.0-17.0 | 6.0-10.0 | .15 max | 1.00 max | .015 max | .50 max | .50 max |
Typical room temperature Tensile Properties of Annealed Material
| Product Form | Condition | Tensile (ksi) | .2% Yield (ksi) | Elongation (%) | Hardness (HRB) |
| Tube & Pipe | ot-Finished | 75-100 | 25-50 | 35*55 | - |
| Tube & Pipe | Cold-Drawn | 80-100 | 25-50 | 35-55 | 88 Max |
The Inconel Alloy 600 Pipes and Tubes is used in the following Applications:-
Inconel 600 (UNS N06600) — Ni-Cr alloy for high-temperature oxidation and general corrosion resistance.
ASTM B829. Confirm ASME SB companion and product form on the PO.
This page is pipe product. Use the matching tube page for heat-exchanger / instrumentation tube.
EN 10204 3.1 MTC standard; 3.2 and TPI on request.
We supply this product for domestic and export projects with MTC (EN 10204 3.1 standard; 3.2 / TPI on request). Include destination, Incoterms and inspection needs on the RFQ.