Delivering High Quality Stainless Steel and Alloy Piping Products — Pipes, Tubes, Fittings, Flanges and more for Global Industries.
sales@savoypipinginc.com
Delivering High Quality Stainless Steel and Alloy Piping Products — Pipes, Tubes, Fittings, Flanges and more for Global Industries.
sales@savoypipinginc.com
| Choose | When | Watch-outs |
|---|---|---|
| B829 tube | General-requirements ordering for nickel alloy tube | Pair with B163 / B167 / B444 as datasheet requires |
| B829 pipe | Same grade, pipe product form | OD×wall vs NPS/schedule |
| Inconel hub | Sister grades | State anneal / stress-relieve |
ASTM B829 Inconel 625 seamless tube OD: ____ Wall: ____ Length: ____ Qty: ____ Condition: ____ MTC: 3.1/3.2 Destination: ____
Email sales@savoypipinginc.com with destination and any NACE / TPI notes.
Savoy Piping Inc. supplies Inconel 625 seamless tube — Ni-Cr-Mo-Nb alloy for high strength and outstanding corrosion resistance.
Ni-Cr-Mo-Nb alloy for high strength and outstanding corrosion resistance.
Choose 625 when strength + corrosion exceed 600/601 capability.
| ASTM B829 Inconel 625 Tubes Specification | ASTM B163 / ASTM B167 / ASTM B444 / ASTM B829 / ASME SB163 / ASME SB167 / ASME SB444 / ASME SB829 |
| ASTM B829 Inconel 625 Tubes Grades | ASTM B829 Inconel 625 (UNS N06625) seamless tube |
| ASTM B829 Inconel 625 Tubes Type | Cold Drawn / Welded / ERW |
| ASTM B829 Inconel 625 Tubes Outer Diameter Size | Seamless - 1/4" NB to 6" NB (Nominal Bore Size) Welded / ERW- 1" NB to 16" NB (Nominal Bore Size) |
| ASTM B829 Inconel 625 Tubes Wall Thickness | Schedule 10 to Schedule 160 |
| ASTM B829 Inconel 625 Tubes Length | 5 to 7 Meters, 09 to 13 Meters, Single Random Length, Double Random Length And Customize Size. |
| ASTM B829 Inconel 625 Tubes Ends | Plain Ends / Beveled Ends |
| ASTM B829 Inconel 625 Tubes Delivery Conditions | As Rolled, Cold Drawn, Hot Finish, Stress Relieved, Annealed, Hardened, Tempered |
| ASTM B829 Inconel 625 Tubes Coating | Electropolish, Mechanical Polish, Satin Finish, Passivated |
| ASTM B829 Inconel 625 Tubes Other Testing | NACE MR0175, Hardness Test, Flare, Hydrostatic Test, Eddy Current test, Grain Size Test, Eddy Current, Annealed, Tempered, Stress Relieved etc. |
| ASTM B829 Inconel 625 Tubes Dimension | All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM And ASME |
| ASTM B829 Inconel 625 Tubes Value Added Services | Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Heat Treatment |
| ASTM B829 Inconel 625 Tubes Packaging | Loose / Bundle / Wooden Pallet / Wooden box-a / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector |
| ASTM B829 Inconel 625 Tubes Shipment & Transportation | By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 4 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes |
| ASTM B829 Inconel 625 Tubes Material Test Certificate | Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC |
Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
This specification contains various requirements that, with the exception of Sections 5 and 10, are mandatory requirements to the following ASTM nickel and nickel alloy, seamless pipe and tube specifications:
1.2 One or more of the test requirements of Section 5 apply only if specifically stated in the product specification or in the purchase order.
1.3 In case of conflict between a requirement of the product specification and a requirement of this general specification, only the requirement of the product specification needs to be satisfied.
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
Keywords
Nickel - Nickel Alloys - Seamless Nickel Alloy Pipes - Seamless Nickel Alloy Tubes - Seamless Pipes and Tubes
The chemical composition of Inconel Alloy 625 is provided in the table below:
| Element | Percentage |
| Carbon | 0.010 max |
| Manganese | 0.50 max |
| Phosphorus | 0.015 max |
| Sulfur | 0.015 max |
| Silicon | 0.50 max |
| Chromium | 20.00 - 23.00 |
| Nickel | Balance |
| Molybdenum | 8.00 - 10.00 |
| Iron | 5.00 max |
| Titanium | 0.40 max |
| Aluminum | 0.40 max |
| Tantalum | 0.05 max |
Typical room temperature Tensile Properties of Annealed Material
| Temp° F | Tensile (psi) | .2% Yield (psi) | Elongation in 2 “ (%) |
| 70 | 144,000 | 84,000 | 44 |
| 400 | 134,000 | 66,000 | 4 |
| 600 | 132,000 | 63,000 | 42.5 |
| 800 | 131,500 | 61,000 | 4 |
| 1000 | 130,000 | 60,500 | 48 |
| 1200 | 119,000 | 60,000 | 34 |
| 1400 | 78,000 | 58,500 | 59 |
| 1600 | 40,000 | 39,000 | 117 |
The Inconel Alloy 625 Pipes and Tubes is used in the following Applications:-
Inconel 625 (UNS N06625) — Ni-Cr-Mo-Nb alloy for high strength and outstanding corrosion resistance.
ASTM B829. Confirm ASME SB companion and product form on the PO.
This page is tube product. Use the matching pipe page when the datasheet says pipe.
EN 10204 3.1 MTC standard; 3.2 and TPI on request.
We supply this product for domestic and export projects with MTC (EN 10204 3.1 standard; 3.2 / TPI on request). Include destination, Incoterms and inspection needs on the RFQ.