Delivering High Quality Forged Flanges in Form of Weldneck (WNRF), Blind, Socketweld, Slip On (SORF), Threaded, Laped Joint, Screw, Plate, Paddle Blank, Spacer etc.

Socket Weld Flanges, Socketwelding Flanges, SWRF Flanges, ASTM A/SA182 Socket Weld Flanges, ASTM A/SA105 Socket Weld Flanges, ASTM A/SA694 Socket Weld Flanges, ASTM A/SA564 Socket Weld Flanges, ASTM A/SA350 Socket Weld Flanges Manufacturer in India.

Savoy Piping Inc., is an ISO 9001:2015, PED/27/EC and OHSAS 18001:2007 Approved Manufacturer of Stainless Steel Socket Weld Flanges, Carbon Steel Socket Weld Flanges, Alloy Steel Socket Weld Flanges, Chrome Moly Alloy Socket Weld Flanges, Duplex Stainless Steel Socket Weld Flanges, Super Duplex Socket Weld Flanges, Inconel Socket Weld Flanges, Hastelloy Socket Weld Flanges, Monel Socket Weld Flanges in Class Class 150#, 300#, 400#, 600#, 900#, 1500#, 2500#.

Manufacturer and Exporter of Socket Weld Flanges in Dimension accordance with ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092-1, DIN, etc. Certified with NACE, PWHT, HIC, SSC, Magnetic Particle Test, Dye Penereteration Test etc.


Socket Weld Flange Definition

Socket Weld Flanges were initially developed for use on small-size high pressure piping. Their static strength is equal to Slip On flanges, but their fatigue strength 50% greater than double-welded Slip On flanges.

The connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, a space must be created between flange or fitting and pipe.

ASME B31.1 1998 127.3 Preparation for Welding (E) Socket Weld Assembly says: In assembly of the joint before welding, the pipe or tube shall be inserted into the socket to the maximum depth and then withdrawn approximately 1/16" (1.6 mm) away from contact between the end of the pipe and the shoulder of the socket. The purpose for the bottoming clearance in a Socket Weld is usually to reduce the residual stress at the root of the weld that could occur during solidification of the weld metal. The image shows you the X measure for the expansion gap.

The disadvantage of this Socketwelding Flange is right the gap, that must be made. By corrosive products, and mainly in stainless steel pipe systems, the crack between pipe and flange can give corrosion problems. In some processes this flange is also not allowed. I am not an expert in this matter, but on the internet, you will find a lot of information about forms of corrosion.

Also for this flange counts, that principle always firstly a pipe must be welded and then just a fitting.

Key Features:

  • The recess on the inside diameter allows for a good fit of the pipe allowing for a smooth flow of liquid
  • Work well for smaller sizes and higher pressure temperature conditions.
  • Similar to slip-on flanges, but must specify the pipe schedule they will be used for with socket welds

Savoy Piping Inc., are recognized as the prominent Manufacturer, Exporter and Supplier of a broad assortment of Socket Weld Flanges. The offered Socket Weld Flanges is designed with utmost precision in conformity with the international quality standards.

Socket Weld Flange Range

Socket Weld Flange Specification ASTM A182 / ASME SA182 / ASTM A105 / ASME SA105 / ASTM A564 / ASME SA564 / ASTM A350 / ASME SA350 / ASTM A694 / ASME SA694 / ISO 1559-3
Socket Weld Flange Manufacturing Process Hot Forging / Rolling / Machining
Socket Weld Flange Grades Stainless Steel - ASME SA182 / ASTM A182 F304, ASTM A182 F304L, ASTM A182 F304H, ASTM A182 F309S, ASTM A182 F310S, ASTM A182 F316, ASTM A182 F316, ASTM A182 F316L, ASTM A182 F316Ti, ASTM A182 F317L, ASTM A182 F321, ASTM A182 F347, ASTM A182 F904L, ASTM A182 F44 etc.

Duplex Steel - ASME SA182 / ASTM A182 F51, ASTM A182 F53, ASTM A182 F55, ASTM A182 UNS S31803, ASTM A182 UNS S32750, ASTM A182 UNS S32760 etc.

Carbon Steel - ASME SA105, ASTM A105, ASME SA105N, ASTM A105N, ASME SA350 LF2, ASTM A350 LF2, ASME SA694 / ASTM A694 F42, ASTM A694 F46, ASTM A694 F52, ASTM A694 F56, ASTM A694 F60, ASTM A694 F65, ASTM A694 F70
ISO 15590-3 L245, ISO 15590-3 L290, ISO 15590-3 L360, ISO 15590-3 L415, ISO 15590-3 L250, ISO15590-3 L285

Alloy Steel - ASME SA182 / ASTM A182 F5, ASTM A182 F9, ASTM A182 F11, ASTM A182 F22, ASTM A182 F91

Nickel Alloys - ASTM B564 / ASME SB564 UNS NO2200, ASME SB564 UNS NO2201, ASME SB564 UNS NO4400, ASME SB564 ASME SB564 UNS NO6600, UNS NO6600, ASME SB564 UNS NO6601, ASME SB564 UNS NO6625, ASME SB564 UNS NO8800, ASME SB564 UNS NO8810, ASME SB564 UNS NO8811, ASME SB564 UNS No8825, ASME SB564 UNS NO10276

Socket Weld Flange Outer Diameter 1/2" NB TO 64" NB
Socket Weld Flange Pressure Class Class 150#, Class 300#, Class 400#, Class 600#, Class 900#, Class 1500#, Class 2500# or As Per Custom Requirement
PN 6, PN 10, PN 16, PN 25 and PN 40 etc
Socket Weld Flange Schedule Sch 10s TO Sch XXS or As Per Custom Requirement
Socket Weld Flange Facing Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Socket Weld Flange Dimension ASME B16.5, ASME B16.47 SERIES A, ASME B16.47 SERIES B, ASME B16.36, BS10, EN1092-1:2013, MSS SP44, ASA, API-605, ISO 7005, ISO 15590-3, DIN 2631--2638, DIN 2573-2576, DIN 2527, DIn 2641-2642, DIN 2565-2566, DIN2502, AWWA, AS2129 TABLE C, D, E, F, J etc..
Socket Weld Flange Types Welding Neck Flange, Slip On Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Blind Flange, Orifice Flanges, Plate Flange, Long Welding Neck Flanges, Weldoflange, Nipoflange, Expander Flange, Reducing Flange, WNRF Flange, SORF Flange, SWRF Flange, Custom Flange as per Drawing etc.
Socket Weld Flange Other Testing NACE MR0175, Ultrasoung TEST, IGC TEST, Intergranular Corrrosion Test as per ASTM A262 Practice E, Charpy Impact Test, Macro, Grain Size, Hardness, HIC, SSC, Sour Service etc.
Socket Weld Flange Value Added Services Rolling, Drill, Punch, CNC Machining, Sand Blasting, Shot Blasting, Heat Treatment, Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized
Socket Weld Flange Packaging Loose / Carrate / Wooden Pallet / Wooden Box / Plastic Cloth Wraps
Socket Weld Flange Shipment & Transportation By Road - Truck / Train Partial Load, Full Load, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes
Socket Weld Flange Material Test Certificate Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS, Bureau of Indian Standards BIS Approved ETC

Socket Weld Flanges Available Specifications and Grades

Stainless Steel Socket Weld Flanges
ASME SA182 / ASTM A182 F304 Socket Weld Flanges, ASTM A182 F304L Socket Weld Flanges, ASTM A182 F304H Socket Weld Flanges, ASTM A182 F309S Socket Weld Flanges, ASTM A182 F310S Socket Weld Flanges, ASTM A182 F316 Socket Weld Flanges, ASTM A182 F316 Socket Weld Flanges, ASTM A182 F316L Socket Weld Flanges, ASTM A182 F316Ti Socket Weld Flanges, ASTM A182 F317L Socket Weld Flanges, ASTM A182 F321 Socket Weld Flanges, ASTM A182 F347 Socket Weld Flanges, ASTM A182 F904L Socket Weld Flanges, ASTM A182 F44 Socket Weld Flanges etc.

Duplex Steel Socket Weld Flanges

ASME SA182 / ASTM A182 F51 Socket Weld Flanges, ASTM A182 F53 Socket Weld Flanges, ASTM A182 F55 Socket Weld Flanges, ASTM A182 UNS S31803 Socket Weld Flanges, ASTM A182 UNS S32750 Socket Weld Flanges, ASTM A182 UNS S32760 Socket Weld Flanges etc.

Carbon Steel Socket Weld Flanges

ASME SA105, ASTM A105 Socket Weld Flanges, ASME SA105N, ASTM A105N Socket Weld Flanges, ASME SA350 LF2 Socket Weld Flanges, ASTM A350 LF2 Socket Weld Flanges, ASME SA694 / ASTM A694 F42 Socket Weld Flanges, ASTM A694 F46 Socket Weld Flanges, ASTM A694 F52 Socket Weld Flanges, ASTM A694 F56 Socket Weld Flanges, ASTM A694 F60 Socket Weld Flanges, ASTM A694 F65 Socket Weld Flanges, ASTM A694 F70 Socket Weld Flanges

ISO 15590-3 L245 Socket Weld Flanges, ISO 15590-3 L290 Socket Weld Flanges, ISO 15590-3 L360 Socket Weld Flanges, ISO 15590-3 L415 Socket Weld Flanges, ISO 15590-3 L250 Socket Weld Flanges, ISO15590-3 L285 Socket Weld Flanges

Alloy Steel Socket Weld Flanges

ASME SA182 / ASTM A182 F5 Socket Weld Flanges, ASTM A182 F9 Socket Weld Flanges, ASTM A182 F11 Socket Weld Flanges, ASTM A182 F22 Socket Weld Flanges, ASTM A182 F91 Socket Weld Flanges

Nickel Alloys Socket Weld Flanges

ASTM B564 / ASME SB564 UNS NO2200 Socket Weld Flanges, ASME SB564 UNS NO2201 Socket Weld Flanges, ASME SB564 UNS NO4400 Socket Weld Flanges, ASME SB564 ASME SB564 UNS NO6600 Socket Weld Flanges, UNS NO6600 Socket Weld Flanges, ASME SB564 UNS NO6601 Socket Weld Flanges, ASME SB564 UNS NO6625 Socket Weld Flanges, ASME SB564 UNS NO8800 Socket Weld Flanges, ASME SB564 UNS NO8810 Socket Weld Flanges, ASME SB564 UNS NO8811 Socket Weld Flanges, ASME SB564 UNS No8825 Socket Weld Flanges, ASME SB564 UNS NO10276 Socket Weld Flanges

Socket Weld Flange Price

Socket Weld Flange Manufacturer Name and Origin

Socket Weld Flange is in Ready Stock and Ready to Deliver. High Quality, Lower Cost But Best Service in Flanges

Socket Weld Flange Application

  • Stainless Steel Socket Weld Flanges uses in Equipments
  • Carbon Steel High Yield Steel Socket Weld Flanges uses in Oil and Gas Pipeline
  • Socket Weld Raised Face Flanges uses in Chemical Industry
  • Alloy Steel WNRF Flanges uses in Plumbing
  • Flat Faced Socket Weld Flanges uses in Heating
  • Socket Weld Pipe Flanges uses in Water Supply Systems
  • ANSI B16.5 Socket Weld Forged Flanges uses in Power Plant
  • Socket Weld Plate Flanges uses in Paper & Pulp Industry
  • Socket Weld Flange uses in General Purpose Applications
  • Steel Socket Weld Flanges uses in Fabrication Industry
  • Socket Weld Flange uses in Food Processing Industry
  • Socket Weld Flanges uses in Structural Pipe

Socket Weld Flanges Available Offer and Discounts

Buy Now Socket Weld Flange at an Attactive Discounted Price, Order Above USD $ 25000 are Eligible of 2% Discount. We Offer Free Insurance and Best Shipping Rates. Our Prices are Always More Competitive and without any compromise in Quality of the Material.

Socket Weld Flanges Packing Shipment

Socket Weld Flange is Covered with Plastic Cloth and Packed in Wooden Box, Wooden Pallet and Wooden Fumigated Carrate. Our Packaging is Fully Waterproof and Safe for Transport with Proper Strips on Wooden Box, having Lifting Point.

Socket Weld Flange Exported Countries

We Export Socket Weld Flanges to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen , Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States Of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc

Socket Weld Flanges Supplying in States and Cities

We Supply Socket Weld Flanges Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Mumbai, Navi Mumbai, Pune, Nashik, Nagpur, Solapur, Kolhapur, Ambernath, Ahmednagar, Latur, Ahmadabad, Surat, Rajkot, Vadodara, Panaji, Madgaon, Chennai, Kolkata, Hyderabad, Bengaluru, Delhi, New Delhi, Ludhiana, Chandigarh, Raipur, Bhopal, Jamshedpur, Vishakhapatnam, Cochin, Ghaziabad, Noida, Gurugram, Bhillai, Durgapur, Vijaywada, Kanpur etc.

Savoy Piping Inc., is a well known worldwide Exporter of Socket Weld Flanges, Savoy Piping Inc., is committed to provide each and every customer with the highest standard of customer service. We deals in Socket Weld Flanges in India and Overseas, offering a wide range of Socket Weld Flanges