Delivering High Quality Stainless Steel Sheet, Plate & Coils in ASTM A240 Type 304, 304L, 310s, 316, 316L, 317L, 321, 347, 904L etc.

316l HR Stainless Steel Plate, SS 316l HR Steel Plate, ASTM A240 TP316l HR Plate, ASME SA240 TP316l HR Plate, 316l Quality Stainless Steel Plates

316l HR Stainless Steel Plate, Sheets and Coils in Hot Rolled (HR) and Cold Rolled (HR) Conditions No.1 Finish, No.2 Finish, No.2B Finish, No. 8 Finish, BA Finish (Bright Annealed), Satin Finish, Hairline Finish.

Stainless Steel 316l hr Plates Manufacturer Supplier

316l hr Stainless Steel Plate is one of the most versatile and commonly used stainless steels on the market, Grade 316l hr stainless steel is the most standard used alloy of this type. Essentially, Grade 316l hr is an austenitic chromium alloy which is also known as an "18/8" stainless as the make-up of the steel is 18% chromium and 8% nickel.

The chromium content promotes the material's considerable resistance to the effects of corrosion and oxidation. The stainless steel alloy resists most oxidizing acids and will withstand ordinary rusting though this does not mean that the steel will not tarnish over time. The steel needs to be cold worked to generate higher tensile strength. For stainless steel sections which are welded heavily, post-weld annealing may be necessary to provide maximum corrosive resistance.

Type 316l hr and Type 316l hrL have very similar chemical and mechanical properties and are often included on a single material test certificate when the actual properties of a stainless steel plate meet the hriteria of both types. This is a very common occurrence. Type 316l hrL is a variation of Type 316l hr and has a lower carbon content which improves weldability and lowers the risk of reduced corrosion resistance around the weld. Type 316l hrL also has a slightly lower yield and tensile strength than Type 316l hr.

As with most steel plate products a number of different designations are used for these steels. The most common are:

  • Type 316l hr              1.4301 (EN Steel Number)            S316l hr00 (UNS) 
  • Type 316l hrL            1.4307 (EN Steel Number)            S316l hr03 (UNS)

Savoy Piping Inc. is specialist distributor, processor and supplier of stainless steel sheets in grade 201, 316l hr, 316l hrL, 316L, 409, and 430 stainless steels in all finishes. We are suppliers of ASTM A240 Stainless Steel 316l hr/316l hrL Sheets made by world’s leading mills, such as Jindal Stainless Ltd., Outokumpu, POSCO, DKC- Korea, European Mills, NTK- Japan, TISCO, Aperam and others. We can supply cut to size ASTM A240 Stainless Steel 316l hr/316l hrL Sheets, with both narrow and wide widths.

  • Order Large or Small Quantity of ASTM A240 Stainless Steel 316l hr Sheets
  • Cut to Size ASTM A240 Stainless Steel 316l hr Sheets Available
  • No Minimum Order Quantity

Categories: Stainless Steel, Stainless Steel 316l hr/316l hrL, Steel Plates, Steel Sheets Tags: 1.4301, 1.4307, 2B Finish, 8K Finish, Dealers, Distributors, Exporters, Jindal Stainless, Manufacturer, Mirror Finish Sheets, No.1 Finish, No.4 Finish, No.8 Finish, S316l hr00, S316l hr03, Stainless Steel 316l hr Sheets, Stainless Steel 316l hrL Sheets, Stainless Steel Sheet Suppliers, Stainless Steel Sheets, Suppliers

ASTM A240 Stainless Steel Sheets Specification

Specifications : ASTM A240 / ASME SA240
Item : Stainless Steel Sheets (Hot rolled, cold rolled)
Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Surface : the surface and finish of stainless steel Sheets: 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc

Manufacturer : POSCO, Aperam, Jindal Stainless, DKC Korea, Thyssenkrup, Baosteel, TISCO, Arcelor Mittal, VDM, Nippon Metal, Outokumpu
Thickness : 0.3~10.0mm

Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange)
End : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Grade : SS 316l, 316lL, 316lH, 316, 316L, 316LN, 316Ti, 309, 310S, 317L, 321, 347, 409, 410, 420, 430, 446, 202 Etc.

Product Range

Sr. No.
Size (in mm) Thickness
Specification
Manufacturer
1 1000 x 2000
1220 x 2440
(4' x 8')
1250 x 2500
1500 x 3000 To 6000
2000 x 4000 To 6000
0.3 mm To 120 mm A - 240 Jindal
Sail
Shah Alloys
Imported Etc.
Specifications
Standards Designation
ASTM A 240
ASME SA 240

Omposition

Typical compositional ranges for grade 304 stainless steels are given in table 1.

Composition Ranges for 316 hr grade stainless steel Sheets & Plates

Grade C Mn Si P S Cr Mo Ni N
304 min.
max.
-
0.08
-
2.0
-
0.75
-
0.045
-
0.030
18.0
20.0
- 8.0
10.5
-
0.10
304L min.
max.
-
0.030
-
2.0
-
0.75
-
0.045
-
0.030
18.0
20.0
- 8.0
12.0
-
0.10
304H min.
max.
0.04
0.10
-
2.0
-
0.75
-0.045 -
0.030
18.0
20.0
- 8.0
10.5
-

Mechanical Properties

Typical mechanical properties for grade 304 stainless steels Plates & Sheets are given in table 2.

Mechanical properties of 316l hr grade stainless steel Sheets & Plates

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
304 515 205 40 92 201
304L 485 170 40 92 201
304H 515 205 40 92 201

304H also has a requirement for a grain size of ASTM No 7 or coarser.

Physical Properties

Typical physical properties for annealed grade 304 stainless steels are given in table 3.

Physical properties of 316l hr grade stainless steel in the annealed condition

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (μm/m/°C) Thermal Conductivity (W/m.K) Specific Heat 0-100°C (J/kg.K) Electrical Resistivity (nΩ.m)
0-100°C 0-315°C 0-538°C at 100°C at 500°C
304/L/H 8000 193 17.2 17.8 18.4 16.2 21.5 500 720

Grade Specification Comparison

Approximate grade comparisons for 304 stainless steels are given in table 4.

Grade specifications for 316 hr grade stainless steel

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
304 S30400 304S31 58E 1.4301 X5CrNi18-10 2332 SUS 304
304L S30403 304S11 - 1.4306 X2CrNi19-11 2352 SUS 304L
304H S30409 304S51 - 1.4948 X6CrNi18-11 - -

These comparisons are approximate only. The list is intended as a comparison of functionally similar materials not as a schedule of contractual equivalents. If exact equivalents are needed original specifications must be consulted.

Possible Alternative Grades
Possible alternative grades to grade 304 stainless steels are given in table 5.

Possible alternative grades to 316 hr grade stainless steel

Grade Why it might be chosen instead of 304
301L A higher work hardening rate grade is required for certain roll formed or stretch formed components.
302HQ Lower work hardening rate is needed for cold forging of screws, bolts and rivets.
303 Higher machinability needed, and the lower corrosion resistance, formability and weldability are acceptable.
316 Higher resistance to pitting and crevice corrosion is required, in chloride environments
321 Better resistance to temperatures of around 600-900°C is needed…321 has higher hot strength.
3CR12 A lower cost is required, and the reduced corrosion resistance and resulting discolouration are acceptable.
430 A lower cost is required, and the reduced corrosion resistance and fabrication characteristics are acceptable.

OTHER GRADES OF STAINLESS STEEL 316 / 316L SHEETS PLATES

Stainless Steel 316 Sheets Plates
Stainless Steel 316L Sheets Plates
SS 304 Sheets Plates
SS 304L Sheets
Stainless Steel UNS S30400 Plates
SS UNS S30403 Sheets Plates
Stainless Steel Din 1.4306 Plates
SS Din 1.4307 Sheets

316 hr Stainless Steel Plates and Sheets Packing

316 hr Stainless Steel Plates and Sheets is sleeved into plastic bag individually, pieces wrapped with water-proof material, bundled with nylon rope. Clear labels are tagged on the outside of the package for easy identification of the quantity and product I.D. Great care is taken during operation and transportation. SS 304 Stainless Steel Plate packing will be according to international standard in bundles strapped by strips then into containers to avoid any damage.

Delivery: Within 10-25 days or asap if we have enough stock

Types of Packaging:

  • - Bundles (hexagonal)
  • - Wooden box-aes
  • - Crates (steel/wooden)
  • - Special crates for U-Bend tubes with each radius separated
  • - Packaging for SS 316l Stainless Steel Plate ASTM A240 as per customer's requirements

Special Features:

  • - Each bundle covered with plastic for protection against extreme weather.
  • - End of 304 Stainless Steel Plate protected by plastic Strip.
  • - Bundles strapped with plastic strips.
  • - Each radius of U-Bend tube separated by a separator.
  • - Packaging list (laminated) placed with box-a/crate.

Stockholder, Suppliers of Stainless Steel 316/316L Sheets

“Yes, It’s in Stock and Ready to Deliver”
High Quality, Lower Cost But The Best Service in Steel Plates

304 Stainless Steel Plates and Sheets Available with Stock Sizes:

  • 0.2 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 0.3 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 0.4 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 0.8 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 1 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 1.65 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 2.11 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 3.1 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 04 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 05 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 06 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 08 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 10 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 12 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 15 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 16 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 18 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 20 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 22 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 25 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 28 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 30 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 32 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 35 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 36 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 38 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 40 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 42 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 45 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 50 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 52 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 60 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 62 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 65 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 70 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 80 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 90 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 100 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 110 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 120 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 120 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet

We export 316l hr Stainless Steel Plates to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States Of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc.

Savoy Piping Inc. is a well known worldwide exporter of 316l hr Stainless Steel Plates, Savoy Piping Inc. is committed to provide each and every customer with the highest standard of customer service. We deals in 316l hr Stainless Steel Plates in India & Overseas, offering a wide range of 316l hr Stainless Steel Plates.

Savoy Piping Inc. is Leading Manufacturer, Distributor, Exporter, Stockholder and Supplier of 316l Stainless Steel Plates in United States of America (USA), Saudi Arabia, Iran, Iraq, United Arab Emirates (UAE), Singapore, Malaysia, Indonesia

Stainless Steel 316l Plates, Stainless Steel 316lL Plates, SS 316l Plates, Stainless Steel UNS S316l00 Plates, SS UNS S316l03 Plates, Stainless Steel Din 1.4306 Plates, SS Din 1.4307 Sheets