Monel K500 Flanges

Monel K500 (UNS N05500) age-hardened flanges

Savoy Piping Inc. supplies Monel K500 (UNS N05500) forged flanges — precipitation-hardened nickel-copper alloy for higher strength than Monel 400.

Related: Monel 400 hub · WNRF · Blind · Flanges hub.

What is this grade?

K500 adds aluminum and titanium for age hardening while retaining much of Monel 400’s seawater and chemical corrosion resistance. Confirm heat-treatment condition on the PO.

Selection guidance

Related: Monel 400. Use K500 when strength is required; use 400 when ductility/non-hardened condition is preferred.

What to put on the PO

Include Monel K500 / UNS N05500, flange type and facing, size and pressure class (or PN), bore/schedule where applicable, quantity, destination, and documentation (EN 10204 3.1 / 3.2, PMI, NACE, TPI). Email sales@savoypipinginc.com.

Monel K500 range

Specification	ASTM B564 / ASME SB564 (UNS N05500) — state heat-treat condition
Manufacturing process	Hot forging / rolling / machining
Size range	1/2" NB to 24" NB (larger on request / B16.47)
Pressure class	Class 150, 300, 600, 900, 1500, 2500 (project-dependent)
Facing	Flat Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Dimensions	ASME B16.5 / B16.47 Series A & B; EN 1092-1 on request
Types	Weld neck, slip-on, blind, socket weld, threaded, lap joint, long weld neck, reducing, spectacle blind
Test certificate	EN 10204 3.1 / 3.2; PMI / NACE / TPI on request

Monel K500 Flanges Chemical Composition and Properties

The chemical composition of grade Monel K500 Flanges is outlined in the following table

Grade	C	Mn	Si	S	Cu	Fe	Ni	Al	Ti
Monel 400	0.30 max	2.00 max	0.50 max	0.024 max	28.00 – 34.00	2.50 max	63.00 min	—	—
Monel K500 (UNS N05500)	0.25 max	1.5 max	0.5 max	0.010 max	27.00 – 33.00	0.5 – 2	63.00 min	2.30 – 3.15	0.35 – 0.85

Monel K500 Flanges Mechanical and Physical Properties

The mechanical properties of grade Monel K500 Flanges are displayed in the following table.

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Monel 400	8.8 g/cm3	1350 °C (2460 °F)	Psi – 80,000 , MPa – 550	Psi – 35,000 , MPa – 240	40 %
Monel K500	8.44 g/cm3	1350 °C (2460 °F)	Psi – 160000 , MPa – 1100	Psi – 115000 , MPa – 79	20 %

Monel K500 Flanges Manufacturer Name and Origin

Monel K500 Flanges - Savoy Piping Inc., Make, Origin - India
Monel K500 Flanges - Ulma, Origin - Spain
Monel K500 Flanges - Matalfar, Origin - Italy
Monel K500 Flanges - Kofco, Origin - South Korea
Monel K500 Flanges - Melesi, Origin - Italy
Monel K500 Flanges - Viraj, Origin -India
Monel K500 Flanges - Galpetri, Origin - Italy
Monel K500 Flanges - Korea Flages, Origin - South Korea
Monel K500 Flanges - N.K Forge, Origin - Japan
Monel K500 Flanges - Ring Mill, Origin - Italy
Monel K500 Flanges - WMASS, Origin - India
Monel K500 Flanges - Korea Metal, Origin - South Korea
Monel K500 Flanges - Cladtek, Origin - South Korea
Monel K500 Flanges - CHW Forge Origin - India

Monel K500 Flanges is in Ready Stock and Ready to Deliver. High Quality, Lower Cost But Best Service in Flanges

Monel K500 Flanges Types

Monel 400 Flanges	Monel K500 EN 1092-1 Flanges
Monel 400 Long Weld Neck Flange Stockholder	Alloy K500 Threaded Flange Distributors
ASTM B564 Monel 400 Lap Joint Flanges	ASME SB564 Monel K500 BLRF Flange
Monel 400 Raised Face Flanges	K500 Monel Nipoflange
Monel DIN 2.4375 Square Flanges	ASME SB564M Monel 400 SWRF Flange
Monel Alloy 400 Tongue & Groove Flanges	Alloy K500 Male & Female Flanges
Monel 400 DIN Flanges	K500 Monel ASME B16.5 Flanges
Monel UNS N05500 Reducing Flange	Monel 400 Ring Type Joint Flanges Manufacturer
Monel DIN 2.4360 Orifice Flange	Monel K500 Spectacle Blind Flange
Monel 400 WNRF Flange	Monel K500 SORF Flanges
ANSI B16.5 Monel Alloy 400 RTJ Flanges	Monel K500 Screwed Flanges Stockist
Monel K500 BS 404 Flanges	Monel 400 Forged Flanges
Monel UNS N04400 Flanges	Monel K500 Slip on Flange
Monel 400 Flat Flange Suppliers	ANSI K500 Alloy Blind Flange
Alloy K500 Weld Neck Flange Dealer	Monel 400 Socket weld Flanges Exporter

Monel K500 Flanges Application

Oil and Gas Industries
Food Processing Industries
Equipments
Pipeline
Power Industries
Ship Building Industries
Paper Industries
Cement Industries
Chemical Industries

Frequently asked questions

What is Monel K500?

Monel K500 (UNS N05500) is an age-hardened Ni-Cu alloy used for higher-strength flanges in marine and chemical service.

K500 vs 400?

K500 is precipitation-hardened for higher strength; Monel 400 is the non-hardened Ni-Cu grade.

Which specification applies?

Confirm ASTM/ASME forging specification and heat-treat condition. Dimensions: ASME B16.5 / B16.47 (or EN 1092-1).

What belongs on the purchase order?

Grade / UNS / ASTM (or EN) designation, type and facing, size and class/PN, bore/schedule, quantity, destination, and MTC (EN 10204 3.1 / 3.2). State heat-treatment / hardness requirements where applicable.. Email sales@savoypipinginc.com.

Monel K500 Flanges Packing Shipment

Monel K500 Flanges is Covered with Plastic Cloth and Packed in Wooden Box, Wooden Pallet and Wooden Fumigated Crate. Our Packaging is Fully Waterproof and Safe for Transport with Proper Strips on Wooden Box, having Lifting Point.

Monel K500 Flanges Exported Countries

We Export Monel K500 Flanges to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen , Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Myanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States Of America, Canada, Mexico, Panama, Costa Rica, Puerto Rico, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherlands, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc

Monel K500 Flanges Supplying in States and Cities

We Supply Monel K500 Flanges Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Mumbai, Navi Mumbai, Pune, Nashik, Nagpur, Solapur, Kolhapur, Ambernath, Ahmednagar, Latur, Ahmadabad, Surat, Rajkot, Vadodara, Panaji, Madgaon, Chennai, Kolkata, Hyderabad, Bengaluru, Delhi, New Delhi, Ludhiana, Chandigarh, Raipur, Bhopal, Jamshedpur, Vishakhapatnam, Cochin, Ghaziabad, Noida, Gurugram, Bhillai, Durgapur, Vijaywada, Kanpur etc.

Savoy Piping Inc., is a well known worldwide Exporter of Monel K500 Flanges, Savoy Piping Inc., is committed to provide each and every customer with the highest standard of customer service. We deal in Monel K500 Flanges in India and Overseas, offering a wide range of Monel K500 Flanges