We can help supply all of the API 5L X52 PSL 2 Pipe or line pipe supplies that your company needs for use in the oil or natural gas industries. API 5L Line Pipe Specifications for these pipes regulate usage for standard Grade A and Grade B Pipes, with Grade X indicating stronger variants for drilling, production and transport requirements for offshore, arctic, deep well or harsher environments.
This API 5L Specification Covers Seamless and Welded Steel Line Pipe. It includes standard-weight and Extra-Strong threaded Line Pipe. It includes standard-weight and extra-strong threaded line pipe; and standard-weight plain-end, regular-weight plain-end, special plain-end, extra-strong plain-end, special plain-end, extra-strong plain-end pipe; as as well as bell and spigot and through-the-flow line(TFL) pipe.
The purpose of this specification is to provide standards for pipe suitable for use in conveying gas, water, and oil in both the oil and natural gas industries
Grades covered by this specification are A25 ,A ,B (and the following "X" Grades), X42, X46, X52, X56, X60, X65, X70, X80. The two digit number following the "X" indicates the Minimum Yield Strength (in 000's psi) of pipe produced to this grade.
Savoy Piping Inc. Supply a full range of API 5L Seamless Pipes in PSL-1 & PSL-2 line pipe.
Savoy Piping Inc., we carry a full inventory of API 5L Pipe Carbon Steel Pipe products in a variety of sizes to meet the structural piping requirements for applications the water, petroleum, oil & gas and other industries. API 5L Seamless Pipe Carbon Steel Pipe can be Structural in Nature or used in Fluid, Gas, Oil Transmission.
We Supply API 5L Line Pipe in API 5L Grade B PSL1, API 5L Grade B PSL2, API 5L X42 PSL1, API 5L X42 PSL2, API 5L X46 PSL1, API 5L X46 PSL2, API 5L X52 PSL1, API 5L X52 PSL2, API 5L X56 PSL1, API 5L X56 PSL2, API 5L X60 PSL1, API 5L X60 PSL2, API 5L X65 PSL1, API 5L X65 PSL2 ,. The grade indicates the testing methods required for a given application. It is critical that structural grades of Carbon Steel Pipe not be used for Pressure or Fluid applications.
API 5L Line Pipe can be either seamless or welded. Applications for API 5L include, but are not limited to: petroleum, petrochemical, natural gas industries, and waterworks.
API 5L Line Pipe is dimensionally equivalent to A106 and A53 pipe, conforming to industry standard sizes, however it performs to different mechanical properties. One key defining characteristic of this pipe is its yield strength, where the two digit number following the pipe’s "X" grade indicates the Minimum Yield Strength (in 000's psi) of pipe produced to this grade (i.e. X52 Pipe).
Savoy Piping Inc., is a Pipe Distributor in Middle East, Far East and Africa Region that provides API 5L line pipe from 1/2" to 64" in diameter, in grades X42, X46, X52, X60, X65, & X70.
Savoy Piping Inc. specializes in API 5L Seamless Line Pipe with years of Experience in Manufacturing API 5L Carbon Steel Pipe we offer high quality, lower cost but the best service. As a result to that our API 5L Pipes export account today is in various countries like Iran, Iraq, Kuwait, Saudi Arabia, Oman, UAE, Singapore, Malaysia, Indonesia, South korea, Chile, Peru, Venezuela, Australia, Nigeria, Angola, Senegal, Mozambique, Algeria, Libya, Azerbaijan, Netherlands, Brazil, Norway, United Kingdom, Mexico, Canada etc.
Descripstion | GRADE | Size | SCH | Brand | PRICE PER TON in USD |
---|---|---|---|---|---|
Carbon steel SMLS Pipe | api 5l X52 PSL1 pipe api 5l X52 PSL2 pipe |
1/2" to 24" | 10, 20, 30, STD, 40, 60, XS, 80, 100, 120, 140, 160, XXS | NSSMC JAPAN, MSL INDIA, ISMT INDIA | 1200 TO 1400 |
Carbon steel SMLS Pipe | api 5l X52 PSL1 pipe api 5l X52 PSL2 pipe |
1/2" to 24" | 10, 20, 30, STD, 40, 60, XS, 80, 100, 120, 140, 160, XXS | NSSMC JAPAN, MSL INDIA, ISMT INDIA | 1400 TO 2000 |
Carbon steel ERW, LSAW, SAW, EFW Pipe | api 5l X52 PSL1 pipe api 5l X52 PSL2 pipe |
16" to 84" | 10, 20, 30, STD, 40, 60, XS, 80, 100, 120, 140, 160, XXS | NSSMC JAPAN, JFE JAPAN, MSL INDIA, WELDPUN INDIA, ARCELOR MITTAL | 800 TO 1000 |
Carbon steel ERW, LSAW, SAW, EFW Pipe | api 5l X52 PSL1 pipe api 5l X52 PSL2 pipe |
16" to 84" | 10, 20, 30, STD, 40, 60, XS, 80, 100, 120, 140, 160, XXS | NSSMC JAPAN, JFE JAPAN, MSL INDIA, WELDPUN INDIA, ARCELOR MITTAL | 1000 TO 1300 |
API 5L Grade B, x42,x46,x52,X56,x56,x60 Carbon Steel Seamless Pipe Sizes: Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in A106 Grade B / A53 Grade B / API 5L Grade B
Do you need your API 5L X56 PSL2 Pipe shipped to you internationally? Not only do we ship all of our Steel Pipes / Tubes globally, we will consolidate the order for you and ship it to the closest port near you. We have gained several Orders of API 5L X56 PSL2 Pipe from countries like US, Canada, Chile, Brazil, UK, Italy, Venezuela, Belgium, France, Portugal, South Africa, Nigeria, Mexico, China, United Arab Emirates (UAE), Peru, Bahrain, Saudi Arabia, Qatar, Kuwait, Jordan, Malaysia, Thailand (Bangkok), Singapore, Indonesia, Sudan, Kazakhstan, Australia, Israel, Kenya, Russia, Tunisia, Vietnam, Colombia, Iran, Iraq, Sri Lanka, etc.
Domestic network:
We also have our sales representative in Mumbai, Bangalore, Hyderabad, Bhubaneswar, Pune, Jaipur, Surat, Kochi (Cochin), Ahmedabad, Jabalpur, Vishakapatnam, Sholapur, Davangere, Indore, New Delhi (New Delhi municipal council area), Coimbatore, Kakinada, Belagavi, Udaipur, Guwahati, Chennai, Ludhiana, Bhopal, Kolkata, Nagpur, Indore, Thane, Bhopal, Visakhapatnam, Vadodra, Nashik, Faridabad, Rajkot, Aurangabad, Ranchi, Coimbatore, Raipur, Mysore, Salem, Bhilai, Bhiwandi, Bikaner, Mangalore, Bhavnagar, Tirupur, Ankleshwar, Assam, Siliguri, Jamshedpur, Warangal, Nellore, Agartala and Thoothukudi, Rajkot, Tamil Nadu and Maharashtra.
All products are industry-standard conforming to or exceeding API, ASTM, ASME, ANSI and other national and international standards.
API 5L X52 PSL2 Pipe Dimensional Range & Standard Specification
Trade Name | API 5L X52 PSL2 Pipe |
---|---|
Weld Alternatives: | ERW, HF, DSAW/SAWL, SMLS, HSAW |
OD Size Range: | ERW: 0.375″ through 30″ HF: 0.840″ through 24″ DSAW/SAWL: 12.75″ through 144″ SMLS: 0.840″ through 26″ HSAW: 8.625″ through 144″ |
Wall Ranges: | ERW: 0.120″ through 1.000″ HF: 0.120″ through 1.000″ DSAW/SAWL: 0.250″ through 6.000″ SMLS: 0.250″ through 2.500″ HSAW: 0.250″ through 1.000″ |
Lengths: | Single Random Double Random Custom (up to 300′) |
Grade: | ASTM A53, ASTM A106, ASTM A179, ASTM A192, ST35.8, ST37, ST42, ST52, E235, E355, S235JRH, S275JR, S355JOH, P235TR1, 10#, 20#, 45#, Q235, Q345 |
Schedule: | SCH5 SCH10 SCH20 SCH30 SCH40 SCH80 SCH120 SCH140 SCH160 SCHXS SCHXXS |
Surface Finishes: | Bare, Oiled, Mill Varnish, Galv, FBE, FBE Dual, 3LPE, 3LPP, Coal Tar, Concrete Coating and Tape Wrap. |
End Finishes: | Beveled, Square Cut, Threaded & Coupled. |
Additional Services: | Internal Coating |
API 5L X52 | (PSL1) | (PSL2) |
---|---|---|
Minimum Yield Strength: | 56,600 psi | 56,600 psi |
Maximum Yield Strength: | None | 79,000 psi |
Minimum Tensile Strength: | 71,100 psi | 71,100 psi |
Maximum Tensile Strength: | None | 110,200 psi |
Notes: This is a standard line pipe grade specified in API (American Petroleum Institute) specification 5L. |
API 5L X52 Industry Specifications | Chemical Composition | Yield Strength min. (KSI) |
Tensile Strength min. (KSI) |
Yield to Tensile Ratio (max) |
Elongation % |
ASTM A105, A106, A234, A333, A350, A420, A694,A860 | C 0.16 Si 0.45 Mn 1.65 P 0.020 S 0.010 V 0.07 Nb 0.05 Ti 0.04 |
56 | 71 | 0.93 | 19 |
Chemical Composition | |||||||||||
Mass fraction, based upon heat and product analysis % maximum | Carbon EQUIVALENT a | ||||||||||
% MAXIMUM | |||||||||||
Cb | Si | Mnb | P | S | V | Nb | Ti | Other | CEIIW | CEPcm | |
Seamless & Welded Pipes | |||||||||||
L320N or X52N | 0.24 | 0.4 | 1.2 | 0.025 | 0.015 | 0.07 | 0.05 | 0.04 | e | 0.43 | 0.25 |
L320Q or X52Q | 0.18 | 0.45 | 1.4 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | e | 0.43 | 0.25 |
Welded Pipe | |||||||||||
L290M OR X52M | 0.22 | 0.45 | 1.3 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | e | 0.43 | 0.25 |
MECHANICAL REQUIREMENTS | |||
Y.S | T.S | ELONGATION | |
Mpa(psi) | Mpa(psi) | ||
min | min | min | |
390(56 600) | 545(79 000) | f |
IMPACT TEST | |||
AVG. ABSORBED ENERGY | IND. ABSORBED ENERGY | ||
Min.(joules) | Min.(joules) | ||
27 | 20 |
Related Standard & Specification: API, DNV, ISO, DEP, EN, ASTM, DIN, BS, JIS, GB
Related Grade: API 5L A-X80, GB/T9711 L190-L555, ASTM A106/A53/A179/A192/A335/A333, DIN1629/17175, JIS G3454/ 3455/3456
Available Approved Marine: ABS/BV/LR/DNV/GL/KR, EN10204 3.2 MTC
Special Service: Sweet Service, Sour Service, Anti-H2S, NACE MR0175/ISO15156
Produce Process: Cold Drawn, Hot Rolled, Hot Expanded
Available Dimension Range:
Available Length: 3-36 Meters
API 5L L245 / Gr. B (PSL 1) API 5L L290 / X42 (PSL 1) API 5L L245 / Gr. B (PSL 2) API 5L L290 / Gr. B (PSL 2) API 5L L320 / X46 (PSL 1) API 5L L320 / X46 (PSL 2) |
API 5L L360 / X52 (PSL 1) API 5L L360 / X52 (PSL 2) API 5L L415 / X60 (PSL 1) API 5L L415 / X60 (PSL 2) API 5L L450 / X65 (PSL 1) API 5L L450 / X65 (PSL 2) |
Line Pipe API 5L, PSL 1, PSL 2 CSA Z 245.1 EN ISO 3183 GOST 20295 |
Gr A, X70-(N, M) Gr 241-Gr 359 L 245-L485 (N, M, NE, ME) K34-K60 |
The quality level of all Steel Line Pipe, API 5L X52 PSL2 Pipe is guaranteed by a complete internal Quality plan and certificating under ISO-9001, TUV (according to AD 2000-Merkblatt W0/TRD100), API, PED (accordance with Pressure Equipment Directive 97/23/EC), Burst test (Det Norske Veritas), and certainly Lloyds and Stoomwezen.
Tubes for transportation of flammable fluids are made of the following steels, according to EN 10208-1: L210GA, L235GA, L245GA, L290GA, L360GA, according to EN 10208-2: L245NB, L290NB, L360NB, L415NB and according to API 5L: Grade A, Grade B, Grade X42, Grade X46, Grade X52, Grade X60. Additional types of steel (according to DIN 2470-1/1629 and 2470-2/17172 and UNI 7088) together with its chemicals composition and Mechanical Properties are shown in a separate overview.. Steel is made in the electric arc furnace and it is fully killed.
Chemical Composition | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mass fraction, based upon heat and product analysis % maximum | Carbon EQUIVALENT a | ||||||||||
% MAXIMUM | |||||||||||
Cb | Si | Mnb | P | S | V | Nb | Ti | Other | CEIIW | CEPcm | |
Seamless & Welded Pipes | |||||||||||
L290R OR X42R | 0.24 | 0.4 | 1.2 | 0.025 | 0.015 | 0.06 | 0.05 | 0.04 | e | 0.43 | 0.25 |
L290Q OR X42Q | 0.18 | 0.45 | 1.4 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | e | 0.43 | 0.25 |
Welded Pipe | |||||||||||
L290M OR X42M | 0.22 | 0.45 | 1.3 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | e | 0.43 | 0.25 |
Standard | Class | Grade | C | Si | Mn | P | S | V | Nb | Ti |
---|---|---|---|---|---|---|---|---|---|---|
max | max | max | max | max | max | max | max | |||
APL 5L ISO 3181 |
PSL2 | L245R or BR | 0.24 | 0.40 | 1.20 | 0.025 | 0.015 | d | d | 0.04 |
L290R or X42R | 0.24 | 0.40 | 1.20 | 0.025 | 0.015 | 0.06 | 0.05 | 0.04 | ||
L245N or BN | 0.24 | 0.40 | 1.20 | 0.025 | 0.015 | d | d | 0.04 | ||
L290N or X42N | 0.24 | 0.40 | 1.20 | 0.025 | 0.015 | 0.06 | 0.05 | 0.04 | ||
L320N or X46N | 0.24 | 0.40 | 1.40 | 0.025 | 0.015 | 0.07 | 0.05 | 0.04 | ||
L360N or X52N | 0.24 | 0.45 | 1.40 | 0.025 | 0.015 | 0.10 | 0.05 | 0.04 | ||
L390N or X56N | 0.24 | 0.45 | 1.40 | 0.025 | 0.015 | 0.10 | 0.05 | 0.04 | ||
L415N or X60N | 0.24 | 0.45 | 1.40 | 0.025 | 0.015 | 0.10 | 0.05 | 0.04 | ||
L245Q or BQ | 0.18 | 0.45 | 1.40 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | ||
L290Q or X42Q | 0.18 | 0.45 | 1.40 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | ||
L320Q or X46Q | 0.18 | 0.45 | 1.40 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | ||
L360Q or X52Q | 0.18 | 0.45 | 1.50 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | ||
L390Q or X56Q | 0.18 | 0.45 | 1.50 | 0.025 | 0.015 | 0.07 | 0.05 | 0.04 | ||
L415Q or X60Q | 0.18 | 0.45 | 1.70 | 0.025 | 0.015 | c | c | c | ||
L450Q or X65Q | 0.18 | 0.45 | 1.70 | 0.025 | 0.015 | c | c | c | ||
L485Q or X70Q | 0.18 | 0.45 | 1.80 | 0.025 | 0.015 | c | c | c | ||
L555Q or X80Q | 0.18 | 0.45 | 1.90 | 0.025 | 0.015 | c | c | c | ||
L625Q or X90Q | 0.16 | 0.45 | 1.90 | 0.020 | 0.010 | c | c | c | ||
L690Q or X100Q | 0.16 | 0.45 | 1.90 | 0.020 | 0.010 | c | c | c | ||
L245M or BM | 0.22 | 0.45 | 1.20 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | ||
L290M or X42M | 0.22 | 0.45 | 1.30 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | ||
L320M or X46M | 0.22 | 0.45 | 1.30 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | ||
L360M or X52M | 0.22 | 0.45 | 1.40 | 0.025 | 0.015 | b | b | b | ||
L390M or X56M | 0.22 | 0.45 | 1.40 | 0.025 | 0.015 | b | b | b | ||
L415M or X60M | 0.12 | 0.45 | 1.60 | 0.025 | 0.015 | c | c | c | ||
L450M or X65M | 0.12 | 0.45 | 1.60 | 0.025 | 0.015 | c | c | c | ||
L485M or X70M | 0.12 | 0.45 | 1.70 | 0.025 | 0.015 | c | c | c | ||
L555M or X80M | 0.12 | 0.45 | 1.85 | 0.025 | 0.015 | c | c | c | ||
L625M or X90M | 0.10 | 0.55 | 2.10 | 0.020 | 0.010 | c | c | c | ||
L690M or X100M | 0.10 | 0.55 | 2.10 | 0.020 | 0.010 | c | c | c |
Standard | Class | Grade | Yield Strength MPa |
Yield Strength MPa |
Y.S/T.S | ||
---|---|---|---|---|---|---|---|
min | max | min | max | max | |||
API 5L ISO3183 |
PSL2 | L245R or BR L245N or BN L245Q or BQ L245M or BM |
245 | 450 | 415 | 655 | 0.93 |
L290R or X42R L290N or X42N L290Q or X42Q L290M or X42M |
290 | 495 | 415 | 655 | 0.93 | ||
L320N or X46N L320Q or X46Q L320M or X46M |
320 | 525 | 435 | 655 | 0.93 | ||
L360N or X52N L360Q or X52Q L360M or X52M |
360 | 530 | 460 | 760 | 0.93 | ||
L390N or X56N L390Q or X56Q L390M or X56M |
390 | 545 | 490 | 760 | 0.93 | ||
L415N or X60N L415Q or X60Q L415M or X60M |
415 | 565 | 520 | 760 | 0.93 | ||
L450Q or X65Q L450M or X65M |
450 | 600 | 535 | 760 | 0.93 | ||
L485Q or X70Q L485M or X70M |
485 | 635 | 570 | 760 | 0.93 | ||
L555Q or X80Q L555M or X80M |
555 | 705 | 625 | 825 | 0.93 | ||
L625M or X90M L625Q or X90Q |
625 | 775 | 695 | 915 | 0.95 | ||
L690M or X100M L690Q or X100Q |
690 | 840 | 760 | 990 | 0.97 |
Standard | Specified Outside Diameter | Grade | Charp Imapct Test 0℃ | |
---|---|---|---|---|
Impact of Pipe Body | Impact of Weld | |||
API 5L ISO3183 |
D≤762mm | ≤L485 or X70 | 27 | 27 |
L555 or X80 | 40 | 27 | ||
762mm< td="" style="box-a-sizing: border-box-a;"><> | ≤L555 or X80 | 40 | 27 | |
1219mm< td="" style="box-a-sizing: border-box-a;"><> | ≤L415 or X60 | 40 | 27 | |
>L415 or X60 ≤L555 or X80 |
54 | 27 | ||
>1422mm | ≤L415 or X60 | 40 | 40 | |
>L415 or X60 ≤L555 or X80 |
54 | 40 |
API 5L X52 PSL2 Pipe – delivery condition and surface
Usually API 5L X52 PSL2 Pipe are supplied as hot rolled. Only tubes with DN 6 -10, perhaps tubes of other dimensions are supplied as cold drawn and after forming they are heat treated. This is done as per precious agreement. The tube surface meets corresponds to the means of manufacturing.
API 5L X52 PSL2 Pipe – straightness
Tubes are visually straight.
Ends of the API 5L X52 PSL2 Pipe
Ends of tubes are smooth, without threads.
From 60.3 diameter beveled according to standards:
DIN, EN – a = 40° – 60°, c = to 2 mm
ASME – a = 75° ± 5°, c = 1,6 ± 0,8 mm
Marking of API 5L X52 PSL2 Pipe and tube bundles
Tubes with diameter up to 1 ½” are marked with label on the bundle. Tubes with larger diameter than 1 ½” are implemented according to directives or upon request.
API 5L X52 PSL2 Pipe – surface protection
Line pipes are supplied without temporary protection against corrosion. Upon request it is possible to deliver tubes with agreed upon anticorrosion protection. The tube ends may be enclosed by a plastic plug.
API X Grades – some of the sturdiest pipes and tubing available designed for extreme environments or exceedingly high pressure environments
Chemical Composition | |||||||||||
Mass fraction, based upon heat and product analysis % maximum | Carbon EQUIVALENT a | ||||||||||
% MAXIMUM | |||||||||||
Cb | Si | Mnb | P | S | V | Nb | Ti | Other | CEIIW | CEPcm | |
Seamless & Welded Pipes | |||||||||||
L485Q or X70Q | 0.18f | 0.45f | 1.8f | 0.025 | 0.015 | g | g | g | h | 0.43 | 0.25 |
Welded Pipe | |||||||||||
L485M OR X70M | 0.12f | 0.45f | 1.7f | 0.025 | 0.015 | g | g | g | h | 0.43f | 0.25 |
MECHANICAL REQUIREMENTS | |||
Y.S | T.S | ELONGATION | |
Mpa(psi) | Mpa(psi) | ||
min | min | min | |
485(70 300) | 635(92 100) | f |
IMPACT TEST | |||
AVG. ABSORBED ENERGY | IND. ABSORBED ENERGY | ||
Min.(joules) | Min.(joules) | ||
27 | 20 |
API 5L Grade B PSL1 Line Pipes, API 5L Grade B PSL2 Line Pipes, API 5L Grade B PSL1 Sour Service Line Pipes, API 5L Grade B PSL2 Sour Service Line Pipes, API 5L Grade B PSL1 NACE MR-0175 Line Pipes, API 5L Grade B PSL2 NACE MR-0175 Line Pipes, API 5L X42 PSL1 Line Pipes, API 5L X42 PSL2 Line Pipes, API 5L X42 PSL1 Sour Service Line Pipes, API 5L X42 PSL2 Sour Service Line Pipes, API 5L X42 PSL1 NACE MR-0175 Line Pipes, API 5L X42 PSL2 NACE MR-0175 Line Pipes, API 5L X46 PSL1 Line Pipes, API 5L X46 PSL2 Line Pipes, API 5L X46 PSL1 Sour Service Line Pipes, API 5L X46 PSL2 Sour Service Line Pipes, API 5L X46 PSL1 NACE MR-0175 Line Pipes, API 5L X46 PSL2 NACE MR-0175 Line Pipes, API 5L X52 PSL1 Line Pipes, API 5L X52 PSL2 Line Pipes, API 5L X52 PSL1 Sour Service Line Pipes, API 5L X52 PSL2 Sour Service Line Pipes, API 5L X52 PSL1 NACE MR-0175 Line Pipes, API 5L X52 PSL2 NACE MR-0175 Line Pipes, API 5L X56 PSL1 Line Pipes, API 5L X56 PSL2 Line Pipes, API 5L X56 PSL1 Sour Service Line Pipes, API 5L X56 PSL2 Sour Service Line Pipes, API 5L X56 PSL1 NACE MR-0175 Line Pipes, API 5L X56 PSL2 NACE MR-0175 Line Pipes, API 5L X60 PSL1 Line Pipes, API 5L X60 PSL2 Line Pipes, API 5L X60 PSL1 Sour Service Line Pipes, API 5L X60 PSL2 Sour Service Line Pipes, API 5L X60 PSL1 NACE MR-0175 Line Pipes, API 5L X60 PSL2 NACE MR-0175 Line Pipes, API 5L X65 PSL1 Line Pipes, API 5L X65 PSL2 Line Pipes, API 5L X65 PSL1 Sour Service Line Pipes, API 5L X65 PSL2 Sour Service Line Pipes, API 5L X65 PSL1 NACE MR-0175 Line Pipes, API 5L X65 PSL2 NACE MR-0175 Line Pipes, Supplier of API European Pipes, Stockists of Carbon Steel Seamless Pipes, Supplier of API 5L LSAW Pipes, Stockists of API 5L Seamless Pipes, Exporters of API 5L HFW Pipes, Stockists of Japanese Make Seamless Pipes, Stockists of Tennaris make Seamless Pipes, Suppliers of Japanese make LSAW Pipes
Whether you need Carbon Steel API 5L Gr. X60 Seamless Pipe, standard length and diameter pipes and tubing or you need high strength, high tensile, heavy wall linepipe requirements for deep sour wells, drilling, offshore drilling and production, arctic exploration and production, or you need Carbon Steel API 5L Gr. X60 Seamless Pipe for natural gas, oil or water transport, then Savoy Piping Inc. Co. can meet the demands of your company.
API Pipe
API 5L
Carbon Steel Pipe
We Export API 5L X52 PSL 2 Pipe Seamless Pipe to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc
Savoy Piping Inc. is a well known worldwide exporter of API 5L X52 PSL 2 Pipe, Savoy Piping Inc. is committed to provide each and every customer with the highest standard of customer service. We deals in API 5L X52 PSL 2 Pipe in India and Overseas, offering a wide range of Carbon Steel API 5L X52 PSL 2 Pipe