Delivering High Quality Stainless Steel and Alloy Piping Products — Pipes, Tubes, Fittings, Flanges and more for Global Industries.
sales@savoypipinginc.com
Delivering High Quality Stainless Steel and Alloy Piping Products — Pipes, Tubes, Fittings, Flanges and more for Global Industries.
sales@savoypipinginc.com
| Choose | When | Watch-outs |
|---|---|---|
| X42 PSL2 | Typical EPC / gas package | CVN + tighter chem/NDE |
| X42 PSL1 | Only if datasheet allows | Do not downgrade PSL2 |
| API 5L hub | All X grades | State sour annexes if any |
API 5L X42 PSL1/PSL2 seamless OD: ____ Wall: ____ Qty: ____ Delivery condition: ____ Coating: ____ Annexes (HIC/SSC/NACE): ____ MTC: 3.1/3.2 Destination: ____
Email sales@savoypipinginc.com with destination and any IBR / NACE / TPI notes.
Savoy Piping Inc. supplies API 5L X42 seamless line pipe in PSL1 and PSL2 for oil and gas pipeline transportation (~42 ksi / 290 MPa min yield).
X42 PSL1 Seamless ·
X42 PSL2 Seamless ·
X42 PSL1 LSAW ·
X42 PSL2 LSAW
X42 is an API 5L line-pipe grade defined by minimum yield strength (~42 ksi). It is commonly dual-mapped to ISO 3183 L290. Always specify PSL1 or PSL2 on the order.
Also see: API 5L seamless line pipe hub · Carbon seamless hub · CS buttweld.
| API 5L X42 PSL2 Piping Specification | API 5L / ISO 3183 Hot Rolled. |
| API 5L X42 PSL 2 Pipe Grades | API 5L Grade B PSL1, PSL 2 / API 5L X42 PSL1, PSL 2 / API 5L X46 PSL1, PSL 2 / API 5L X52 PSL1, PSL 2 / API 5L X56 PSL1, PSL 2 / API 5L X60 PSL1, PSL 2 / API 5L X65 PSL1, PSL 2 / X70 PSL1, PSL 2 / API 5L X70 PSL1 / PSL2 / API 5CT / API 5L X80 PSL1, PSL 2 / ISO 3183 L245 PSL1, PSL 2, ISO 3183 L290 PSL1, PSL 2, ISO 3183 L320 PSL1, PSL2, ISO 3183 L360 PSL1, PSL 2, ISO 3183 L390 PSL1, PSL 2, ISO 3183 L415 PSL1, PSL 2, ISO 3183 L450 PSL1, PSL 2, ISO 3183 L485 PSL1, PSL 2 |
| API 5L X42 Pipe Type | Seamless |
| API 5L X42 Pipe Outer Diameter Size | 3/8" NB to 30" NB (Nominal Bore Size) |
| API 5L X42 Pipe Wall Thickness | Schedule 20 to Schedule XXS (Heavier On Request) Up to 250 mm Thickness |
| API 5L X42 Pipe Length | 5 to 7 Meters, 09 to 13 Meters, Single Random Length, Double Random Length And Customize Size. |
| API 5L X42 Pipe Ends | Plain Ends / Beveled Ends / Coupling |
| API 5L X42 Pipe Delivery Conditions | As Rolled, Normalizing Rolled, Thermomechanical Rolled / Formed, Normalizing Formed, Normalized and Tempered / Quenched and Tempered - BR / N / Q /T |
| API 5L X42 Pipe Coating | Epoxy Coating / Colour Paint Coating / 3LPE Coating. |
| API 5L X42 Pipe Other Testing | NACE MR0175, NACE TM0177, NACE TM0284, HIC TEST, SSC TEST, SWC, H2 SERVICE, IBR, Etc. |
| API 5L X42 Pipe Dimension | All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM, ASME, API. |
| API 5L X42 Pipe Value Added Services | Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Galavanizing / Heat Treatment |
| API 5L X42 Pipe Packaging | Loose / Bundle / Wooden Pallet / Wooden box-a / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector |
| API 5L X42 Pipe Shipment & Transportation | By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet |
| API 5L X42 Pipe Material Test Certificate | Manufacturer Test certificate As Per EN10204 3.1, 3.2 / Laboratory Test certificate From NABL Approved Lab./ Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC |
| mass fraction, based upon heat and Steel Products analysis % maximum | Carbon equivalent a | ||||||||||
| % maximum | |||||||||||
| Steel Grade and Alloy Steel | C (b) | Si | Mb | P | S | V | Nb | Ti | Other | CE (iiw) | CE Pcm |
| Seamless & Welded Pipes | |||||||||||
| L290R or x42R | 0.24 | 0.40 | 1.20 | 0.025 | 0.015 | 0. 06 | 0. 05 | 0. 04 | e,l | 0.43 | 0.25 |
| L290Q or x42Q | 0.18 | 0.4 | 1.40 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | e,l | 0.43 | 0.25 |
| Welded pipe | |||||||||||
| L290M or x42M | 0.22 | 0.4 | 1.20 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | e,l | 0.43 | 0.25 |
| Pipe Grade | Pipe Body of Seamless and Welded Pipes | Weld seam of HFW, SAW and CIW Pipes | |||||
| Yield Strength Mpa (psi) | Tensile Strength Mpa (psi) | Ratio a,c rt0.5lrm | Elongation (on 50 mm or 2 in) af % | Tensile Strength Mpa (psi) | |||
| min | max | min | max | max | min | min | |
| L245R or BR L245N or BN L245Q or BQ L245M or BM |
24 (35 500) |
40 e (65 300) e |
415 (60 200) |
655 (95 000) |
0.93 | f | 415 (60 200) |
| L290R or X42R L290N or X42N L290Q or X42Q L290M or X42M |
29 (42 100) |
495 (71 800) |
415 (60 200) |
655 (95 000) |
0.93 | f | 415 (60 200) |
| L320N or X46N L320Q or X46Q L320M or X46M |
320 (46 400) |
525 (76 100) |
435 63 100) |
655 (95 000) |
0.93 | f | 435 (63 100) |
| L360N or X52N L360Q or X52Q L360M or X52M |
360 (52 200) |
530 (79 90) |
460 (66 700) |
760 (110 200) |
0.93 | f | 460 (66 700) |
| L390N or X56N L390Q or X56Q L390M or X56M |
39 (56 600) |
54 (79 000) |
49 (71 100) |
760 (110 200) |
0.93 | f | 49 (71 100) |
| L415N or X60N L415Q or X60Q L415M or X60M |
415 (81 90) |
565 (81 90) |
520 (75 400) |
760 (110 200) |
0.93 | f | 520 (75 400) |
| L450Q or X65Q L450M or X65M |
40 (87 700) |
600 (87 000) |
535 (77 600) |
760 (110 200) |
0.93 | f | 535 (77 600) |
| L485Q or X70Q L485M or X70M |
285 (92 100) |
635 (92 100) |
570 (82 700) |
760 (110 200) |
0.93 | f | 570 (82 700) |
The information here is summarized from ASTM Standards and API Specification 5L. Please see the specific API Standards for more information.
| Grade Range | A25 Through X70 | Gr B Through X80 | Table 1 |
| Size Range | 0.405 Through 80 | 4-2/1 Through 80 | Table 1 |
| Type Of Pipe Ends | Plain-End, Threaded-end, Bevelled-End, Special Coupling Pipe | Plain-End | Table 1 |
| Seam Welding | All Methods Continous Welding Limited to Grade A25 | All Methods Except Continous And Laser Welding | Table 1 |
| Electric Welds: Welder Frequency | No Minimum | 100 Khz Minimum | 5.1.3.3.2 |
| Heat Treatments of Electric Welds | Required For Grades > X42 | Required For All Grades (Gr B Through X80) | 5.1.3.3.1; J.3.3.2:6.2.7 |
| Chemistry: Max C For Seamless Pipe | 0.28% For Grades > Gr B | 0.24% | tables 2a, 2b |
| Chemistry: Max C For Welded Pipe | 0.26% For Grades > Gr B | 0.22% | tables 2a, 2b |
| Chemistry: Max P | 0.03% | 0.03% | Tables 2a, 2b |
| Chemistry: Max S | Only When Purchases Specifies Sr18 | 0.02% | Tables 2a, 2b |
| Carbon Equivalent | None | Maximum Required for Each Grade | 4.2:4.3:6.1.3: Sr15.1 |
| Yield Strength, Maximum | None | Maximum for Each Grade | tables 3a, 3b |
| UTS, Maximum | None Required | Maximum For Each Grade | Tables 3a, 3b |
| Fracture Toughness | Only When Purchaser Specifies Sr4 | Required For All Grades | 6.2.6; 9.3.5: 9.8.4; 9.10.7; |
| Non-destructive Inspection of Seamless Pipes | Permitted | sr4 Mandatory | table 14 9.7.2.6 |
| Repair By Welding of Pipe Body, Plate And Skelp | Permitted By Agreement | Prohibited | 5.3.2;9.7.6: B.1;b.2 |
| Certification | certificates When Specified Per Sr15 | Prohibited | 4.3;9.7.4.4;9.7.6;b.1.2;b.4 |
| Traceability | Traceable Only Until All Tests are Passed Unless Sr15 Is Specified | certificates (Sr15.1) Mandatory Traceable After Completion of Tests (Sr15.2) Mandatory |
12.1 5.6 |
| Country Name | Latest Price/ Recent Updated Price 2017-18 |
| API 5L X42 Pipe Price in Indonesia | US $850 - 950 / Metric Ton |
| API 5L X42 Pipe Price in Malaysia | US $850 - 99 / Metric Ton |
| API 5L X42 Pipe Price in United Arab Emirates | AED 3121.84 - 3489.11/ Metric Ton |
| API 5L X42 Pipe Price in Singapore | US $850 - 995 / Metric Ton |
| API 5L X42 Pipe Price in Iran | US $850 - 950 / Metric Ton |
| API 5L X42 Pipe Price in South Korea | US $850 - 1350 / Metric Ton |
| API 5L X42 Pipe Price in Egypt | US $850 - 1150 / Metric Ton |
| API 5L X42 Pipe Price in Saudi Arabia | US $850 - 950 / Metric Ton |
| API 5L X42 Pipe Price in Kuwait | US $850 - 950 / Metric Ton |
| API 5L X42 Pipe Price in South Africa | US $850 - 1100 / Metric Ton |
| API 5L X42 Pipe Price in Qatar | US $850 - 950 / Metric Ton |
| API 5L X42 Pipe Price in Bahrain | BD 320-358 / Metric Ton |
| API 5L X42 Pipe Price in Oman | US $850 - 950 / Metric Ton |
| API 5L X42 Pipe Price in India | INR 56988-63692/ Metric Ton |
| API 5L X42 Pipe Price in Taiwan | US $850 - 950 / Metric Ton |
| API 5L X42 Pipe Price in Vietnam | US $850 - 1250 / Metric Ton |
| API 5L X42 Pipe Price in USA | US $850 - 1050 / Metric Ton |
API 5L Specifications Covers Seamless and Welded pipe suitable for use in conveying gas, water, Oil Sands, and other liquefied media. such as Ethanol and GasolineThe attached requirements cover our offering of API 5L 4th Ed, PSL 1Seamless and Welded API 5L 4th Ed PSL 2 Seamless & Welded; and API 5L 4th Ed PSL2 Welded only.
tensile Properties for Seamless and Welded API 5L X42 Pipe
tensile properties data for Seamless and Welded API 5L steel pipe API 5L 4th Ed PSL 1, PSL 2.
Testing Requirements for Seamless and Welded API 5L X42 Pipe
Our API 5L Gr B Seamless Pipes hydrostatic and mechanical testing information for all sizes and grades covered by the specification.
| Grade A, B, A25 | X42 through X80 | |
| NPS 2-1/2 and smaller --Seamless and Welded, % | +20 -- 12.5 | +15 -- 12.5 |
| NPS 3 --Seamless and Welded, % | +18 -- 12.5 | +15 -- 12.5 |
| NPS 4 through 18 --Seamless and Welded, % | +15 -- 12.5 | +15 -- 12.5 |
| NPS 20 and larger -- Welded, % | +17.5 -- 10.0 | +19.5 -- 8.0 |
| NPS 20 and larger -- Seamless, % | +15.0 -- 12.5 | +17.5 -- 10.0 |
Paint-stenciled or die-stamped manufacturer’s name or mark, Spec 5L, size, weight per foot, grade, process of manufacture, type of steel, length (NPS 4 and larger only). Test pressure when higher than tabulated (NPS 2 and larger only).
api 5l x42 pipe wall thickness, api 5l x42 material properties, x42 pipe specifications, api 5l grade b equivalent, api 5l pipe schedule chart, api 5l x42 tensile strength, api 5l pipe sizes, api pipe meaning API 5L X42 Pipe, API 5L Grade X42 PSL1 Pipe, API 5L X42 Line Pipe, API 5L X42 Seamless Pipe, API 5L X42 Carbon Steel Pipe We provide API 5L X46 Pipe with PSL1 and PSL2. We Carry Complete Range from 3/8" NB to 24" NB, wall Thickness upto 200 MM. Savoy Piping Inc., API 5L X46 Pipe are known for its High Temperature and High Quality and Competitive Price.
 Sabic Saudi Arabia) |
 Shell |
 ALBA (Saudi Arabia) |
 QAFCO(Qatar) |
 Maaden(Saudi Arabia) |
 KNPC(Kuwait) |
 Kuwait Oil Refinery Company(Kuwait) |
 Qatar Petroleum(Qatar) |
 Petroleum Development Oman(Oman) |
 ADNOC(United Arab Emirates) |
 Orpic(Oman) |
 Takreer(Abu Dhabi) |
 YASREF(Abu Dhabi) |
 Petrobras(Brazil) |
 Petronas(Malaysia) |
 NIOC(Iran) |
 NPDC(Nigeria) |
 Egyptian General petroleum Corporation(Egypt) |
API 5L X42 is line pipe with about 42 ksi (290 MPa) minimum yield, commonly mapped to ISO 3183 L290, available in PSL1 or PSL2.
Yes — seamless and welded (LSAW/DSAW/HSAW) forms in PSL1 or PSL2 with EN 10204 documentation as required.
Seamless for many smaller OD packages; LSAW/DSAW/HSAW for larger diameters when the project specifies welded line pipe.
Guide values: yield ~42 ksi (290 MPa), tensile ~60 ksi (414 MPa). Confirm against the ordered API 5L edition and PSL tables.
We supply this product for domestic and export projects with MTC (EN 10204 3.1 standard; 3.2 / TPI on request). Include destination, Incoterms and inspection needs on the RFQ.