Delivering High Quality Buttweld Fittings in Elbow, Tee, Reducer, Cap, Stub End etc.

API 5L X42 SSC Tested Pipes Supplier, Dealer, Distributor, Exporter, Stockholder Based in India.

API 5L X42 SSC Tested PSL1 Pipe, API 5L X42 SSC Tested PSL2 Pipe, API 5L X42 SSC Tested Seamless Pipe, API 5L X42 SSC Tested LSAW Pipe, API 5L X42 SSC Tested DSAW Pipe, API 5L X42 SSC Tested Line Pipe, API 5L X42 SSC Tested SSAW Pipe, API 5L X42 SSC Tested SAW Pipe, API 5L X42 SSC Tested HSAW Pipe, API 5L X42 SSC Tested Welded Pipes, API 5L X42 SSC Tested Carbon Steel Pipes Ready Stock in our Stockyard.


API 5L Grade B SSC Tested Pipe| API 5L L245 SSC Pipe Supplier| API 5L Grade B SSC Tested Pipe Stockholder| API 5L Grade B SSC Tested Pipe Distributor| API 5L Gr B SSC Tested Pipe

Savoy Piping Inc. we carry a full inventory of API 5L X42 SSC Tested Pipe products in a variety of sizes to meet the structural piping requirements for applications the water, petroleum, oil & gas and other industries. API 5L X42 SSC Tested Pipe Carbon Steel Pipe can be Structural in Nature or used in Fluid, Gas, Oil Transmission.

We Supply API 5L SSC Tested Line Pipe in API 5L Grade B SSC Tested Pipe, API 5L X42 SSC Tested Pipe, API 5L X46 SSC Tested Pipe, API 5L X52 SSC Tested Pipe, API 5L X56 SSC Tested Pipe, API 5L X60 SSC Tested Pipe, API 5L X65 SSC Tested Pipe.

Savoy Piping Inc.. specializes in API 5L X42 SSC Tested Pipe with years of Experience in Manufacturing API 5L X42 SSC Tested Carbon Steel Pipe we offer high quality, lower cost but the best service. As a result to that our API 5L Grade B SSC Tested Pipes export account today is in various countries like Iran, Iraq, Kuwait, Saudi Arabia, Oman, UAE, Singapore, Malaysia, Indonesia, South korea, Chile, Peru, Venezuela, Australia, Nigeria, Angola, Senegal, Mozambique, Algeria, Libya, Azerbaijan, Netherlands, Brazil, Norway, United Kingdom, Mexico, Canada etc.

Introduction of API 5L X42 SSC TESTED Pipe

API 5L X42 SSC Tested pipe refers to a specific grade of steel pipe designed and manufactured according to the specifications outlined by the American Petroleum Institute (API). The "SSC Tested" designation indicates that the pipe has undergone testing for resistance to sulfide stress cracking (SSC), which is a type of hydrogen-induced cracking commonly encountered in environments containing hydrogen sulfide (H2S), such as oil and gas production operations. The SSC testing involves subjecting the pipe material to conditions that simulate the presence of hydrogen sulfide to assess its resistance to cracking under such circumstances. This testing ensures that the pipe meets the stringent standards required for use in environments where exposure to H2S may occur, helping to mitigate the risk of pipeline failures due to sulfide stress cracking.

API 5L specification Covers Seamless and Welded Steel Line Pipe. It includes standard-weight and Extra-Strong threaded Line Pipe. It includes standard-weight and extra-strong threaded line pipe; and standard-weight plain-end, regular-weight plain-end, special plain-end, extra-strong plain-end, special plain-end, extra-strong plain-end pipe; as as well as bell and spigot and through-the-flow line(TFL) pipe. API 5L Line Pipe is dimensionally equivalent to A106 and A53 pipe, conforming to industry standard sizes, however it performs to different mechanical properties. One key defining characteristic of this pipe is its yield strength, where the two digit number following the pipe’s "X" grade indicates the Minimum Yield Strength (in 000's psi) of pipe produced to this grade (i.e. X52 Pipe). Savoy Piping Inc. is a Pipe Distributor in Middle East, Far East and Africa Region that provides API 5L line pipe from 1/2" to 64" in diameter, in grades X42, X46, X52, X60, X65, & X70

Sour Service Corrosion (SSC) Test, NACE TM0284

SSC test to evaluate the resistance of pipeline and pressure vessel plate steels to Sour Service Corrosion caused by hydrogen absorption from aqueous sulfide corrosion. An unstressed test specimen is exposed to a solution at ambient temperature and pressure and after a specified time, the test specimen is removed and evaluated.

Specimen Size

  • To conduct the SSC test, requires the following sample sizes:
  • Pipe - upto 2" OD - 200mm long
  • If the pipe is more than 2" OD pipe - 100mm long sample size is required
  • Number of pieces to be tested upto 88mm thick/dia - set of 3 pieces to be tested
  • Number of pieces to be tested more than 88mm thick/dia - 5 pieces to be tested

NACE TM0284 Test Solution

NACE TM0284 specifies either Solution A or Solution B. Solution A is acidified brine. Solution B is simulated seawater prepared in accordance with ASTM D1141.52. In either case, H2S is bubbled through the solution constantly throughout the test period. NACE TM0284 specifies test duration of 96 hours.

Detailed Report

A detailed written report upon completion of each test. Each report includes a description of the test sample that was received, the test procedure that was used, and the pH values of the test solution before exposure and after the exposure. The test bars are cut into sections and examined under a microscope for hydrogen-induced cracks. The dimensions of any such cracks are recorded and used to compute the values in percentage for Crack Length Ratio (CLR), Crack Thickness Ratio (CTR) and Crack Sensitivity Ratio (CSR).

Our API 5L X42 SSC Tested Pipes Range

API 5L X42 SSC Tested Pipe Specification API 5L / ISO 3183 Hot Rolled.
API 5L X42 SSC Tested Pipe Grades API 5L X42 PSL1, PSL 2 / API 5CT / API 5L X42 PSL1, PSL 2 / API 5L X46 PSL1, PSL 2 / API 5L X52 PSL1, PSL 2 / API 5L X56 PSL1, PSL 2 / API 5L X60 PSL1, PSL 2 / API 5L X65 PSL1, PSL 2 / X70 PSL1, PSL 2 / API 5L X70 PSL1 / PSL2 / API 5L X80 PSL1, PSL 2 / ISO 3183 L245 PSL1, PSL 2, ISO 3183 L290 PSL1, PSL 2, ISO 3183 L320 PSL1, PSL2, ISO 3183 L360 PSL1, PSL 2, ISO 3183 L390 PSL1, PSL 2, ISO 3183 L415 PSL1, PSL 2, ISO 3183 L450 PSL1, PSL 2, ISO 3183 L485 PSL1, PSL 2
API 5L X42 SSC Tested Pipe Type Seamless
API 5L X42 SSC Tested Pipe Outer Diameter Size 3/8" NB to 30" NB (Nominal Bore Size)
API 5L X42 SSC Tested Pipe Wall Thicknesss Schedule 20 to Schedule XXS (Heavier On Request) Up to 250 mm Thicknesss
API 5L X42 SSC Tested Pipe Length 5 to 7 Meters, 09 to 13 Meters, Single Random Length, Double Random Length And Customize Size.
API 5L X42 SSC Tested Pipe Ends Plain Ends / Beveled Ends / Coupling
API 5L X42 SSC Tested Pipe Delivery Conditions As Rolled, Normalizing Rolled, Thermomechanical Rolled / Formed, Normalizing Formed, Normalized and Tempered / Quenched and Tempered - BR / N / Q /T
API 5L X42 SSC Tested Pipe Coating Epoxy Coating / Colour Paint Coating / 3LPE Coating.
API 5L X42 SSC Tested Pipe Other Testing NACE MR0175, NACE TM0177, NACE TM0284, SSC TEST, SWC, H2 SERVICE, IBR, Etc.
API 5L X42 SSC Tested Pipe Dimension All Pipes Tube Is Manufactured and Inspected / Tested to the Relevant API Standards including ASTM, ASME, API.
API 5L X42 SSC Tested Pipe Value Added Services Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Galavanizing / Heat Treatment
API 5L X42 SSC Tested Pipe Packaging Loose / Bundle / Wooden Pallet / Wooden box-a / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector
API 5L X42 SSC Tested Pipe Shipment & Transportation By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet
API 5L X42 SSC Tested Pipe Material Test Certificate Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab./ Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC

Annex H
(normative)
PSL 2 Pipe Ordered for SOUR Service

H.1 Introduction

This annex specifies additional provisions that apply for PSL 2 pipe that is ordered for sour service [see 7.2 c) 51 ] .

NOTE:
The consequences of sudden failures of metallic components used for the oil Refinery and gas production associated with their exposure to H2S- containing production fluids led to the development of NACE MR0175/ISO 15156-1[21] and subsequently EFC publication 16[13] ISO 15156-2 used those sources to provide requirements and recommendations for materials qualification and selection for application in environments containing wet H2S in oil and gas production systems. Carbon and low alloy steels selected using ISO 15156—2 are resistant to cracking in defined H2S containing environments in oil and gas production but are not necessarily immune to cracking under all service conditions. Different service conditions might necessitate the alternative testing that is dealt with in ISO 15156—2:2003, Annex B. That annex specifies requirements for qualifying carbon and low alloy steels for H2S service by laboratory testing.

It is the purchaser’s responsibility to select the carbon and low-alloy steels suitable for the intended service.

H.2 Additional information to be supplied by the purchaser
in addition to items a) to g) as specified by 7.1, the purchase order shall indicate which of the following provisions apply for the specific order item:
a) steel casting method for strip or plate used for the manufacture of welded pipe (see H.3.3.2.1);
b) ultrasonic inspection of strip or plate for laminar imperfections (see H.3.3.2.4);
c) supply of helical-seam pipe containing strip/plate end welds (see H.3.3.2.5);
d) chemical composition for intermediate grades (see H.4.1.1);
e) chemical composition for pipe with t > 25,0 mm (0.984 in) (see H.4.1.2);
f) chemical composition limits (see Table H.1, footnotes c), d,) e), f), i), j)and k);
g) frequency of hardness testing of the longitudinal seam weld of HFW or SAW pipe (see Table H.3);
h) SSC test for manufacturing procedure qualification (see Table H.3);
i) alternative HIC/SWC test methods and associated acceptance criteria (see H.7.3.1.3);
j) photomicrographs of reportable HIC cracks (see H.7.3.1.4);
k) alternative SSC test methods and associated acceptance criteria for manufacturing procedure qualification (see H.7.3.2.2);
l) for pipe with t ≥ 5,0 mm (0.197 in), ultrasonic inspection for laminar imperfections with in extended length of 100 mm (4.0 in) at the pipe ends (see K.2.1.3);
m) magnetic particle inspection for laminar imperfections at each pipe end face/bevel (see K.2.1.4);

Chemical Requirement for API 5L X42 SSC Tested Pipe

Table H.1 ---Chemical composition for pipe with t ≤25,0 mm (0.984 in)

Steel grade Mass fraction, based upon heat and product analyses
%
maximum
Carbon
equivalent a

%
maximum
C b Si Mn b P S V Nb Ti Other c, d CE llw CE pcm
SMLS and welded Pipes
L245NS or BNS 0,14 0,40 1,35 0,020 0,003 e f f 0,04 g 0,36 0,19 h
L290NS or X42NS o,14 0,40 1,35 0,020 0,003 e 0,05 0,05 0,04 - 0,36 0,19 h
L320NS or X46NS 0,14 0,40 1,40 0,020 0,003 e 0,07 0,05 0,04 g 0,38 0,20 h
L360NS or X52NS 0,16 0,45 1,65 0,020 0,003 e 0,10 0,05 0,04 g 0,43 0,22 h
L245QS or BQS 0,14 0,40 1,35 0,020 0,003 e 0,04 0,04 0,04 - 0,34 0,19 h
L 290QS or X42QS 0,14 0,40 1,35 0,020 0,003 e 0,04 0,04 0,04 - 0,34 0,19 h
L320QS or X46QS 0,15 0,45 1,40 0,020 0,003 e 0,05 0,05 0,04 - 0,36 0,20 h
L360QS or X52QS 0,16 0,45 1,65 0,020 0,003 e 0,07 0,05 0,04 g 0,39 0,20 h
L390QS or X56QS 0,16 0,45 1,65 0,020 0,003 e 0,07 0,05 0,04 g 0,40 0,21 h
L415QS or X60QS 0,16 0,45 1,65 0,020 0,003 e 0,08 0,05 0,04 g,i,k 0,41 0,22 h
L450QS or X65QS 0,16 0,45 1,65 0,020 0,003 e 0,09 0,05 0,06 g,i,k 0,42 0,22 h
L485QS or X70QS 0,16 0,45 1,65 0,020 0,003 e 0,09 0,05 0,06 g,i,k 0,42 0,22 h
welded pipe
L245MS or BMS 0,10 0,40 1,25 0,020 0,002 e 0,04 0,04 0,04 - - 0,19
L290MS or X42MS 0,10 0,40 1,25 0,020 0,002 e 0,04 0,04 0,04 - - 0,19
L320MS or X46 MS 0,10 0,45 1,35 0,020 0,002 e 0,05 0,05 0,04 - - 0,20
L360MS or X52 MS 0,10 0,45 1,45 0,020 0,002 e 0,05 0,06 0,04 - - 0,20
L390MS or X56 MS 0,10 0,45 1,45 0,020 0,002 e 0,06 0,08 0,04 g - 0,21
L415MS or X60 MS 0,10 0,45 1,45 0,020 0,002 e 0,08 0,08 0,06 g,i - 0,21
L450MS or X65MS 0,10 0,45 1,60 0,020 0,002 e 0,10 0,08 0,06 g,i,j - 0,22
L485MS or X70 MS 0,10 0,45 1,60 0,020 0,002 e 0,10 0,08 0,06 g,i,j - 0,22
a) Based upon product analysis (see 9.2.4 and 9.2.5) The CEllw limits apply if the carbon mass fraction is greater than 0,12 % and the CEpcm limits apply if the carbon mass fraction is less than or equal to 0,12 %.

b) for each reduction of 0,01 % below the specified maximum for carbon, an increase of 0,05 % above the specified maximum for manganese is permissible, up to a maximum increase of 0,20 %.

c) AI total ≤ 0,060 %; N ≤ 0,012 %; AI/N ≥ 2:1 (not applicable to titanium-killed or titanium-treated steel); Cu ≤ 0,35 % (if agreed ,Cu ≤ 0,10 %); Ni ≤ 0,30 %; Cr ≤ 0,30 %; Mo ≤ 0,15 %; B ≤ 0,0005 %.

d) for Welded pipe where calcium is intentionally added, unless otherwise agreed, Ca/s ≥ 1,5 if S > 0,0015 % for SMLS and welded Pipes, the calcium concentration shall be ≤ 0,006 %.

e) The maximum limit for sulfur concentration may be increased to ≤ 0,008 % for SMLS pipe and, if agreed, to ≤ 0,006 % for welded pipe. for such higher-sulfur levels in welded pipe, lower Ca/s ratios may be agreed.

f) Unless otherwise agreed, the sum of the niobium and vanadium concentrations shall be ≤ 0,06 %.

g) The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0,15 %.

h) for SMLS pipe, the listed value may be increased by 0,03.

i) If agreed, the molybdenum concentration shall be ≤ 0,35 %.

j) If agreed, the the chromium concentration shall be ≤ 0,45 %.

k) If agreed, Cr concentration shall be ≤ 0,45 % and Ni concentration shall be ≤ 0,50 %.

Mechanical Requirement for API 5L X42 SSC Tested Pipes

Table H.2 ----Requirements for the results of Tensile tests

Pipe steel grade Pipe body of SMLS and welded Pipes Weld seam of HFW and SAW Pipes
Yield strength a

Rto,5
Mpa (psi)

Tensile strength a

Rm
Mpa (psi)
Ratio b

Rto,5/Rm

Elongation on 50 mm
or 2 in

Af
%
Tensile strength c

Rm
Mpa (psi)
minimum maximum minimum maximum maximum minimum minimum
L245NS or BNS
L245QS or BQS
L245MS or BMS
245
(35 500)
450 d
(65 300) d
415
(60 200)
760
(110 200)
0,93 e 415
(60 200)
L290NS or X42NS
L290QS or X42QS
L290MS or X42MS
290
(42 100)
495
(71 800)
415
(60 200)
760
(110 200)
0,93 e 415
(60 200)
L320NS or X46NS
L320QS or X46QS
L320MS or X46MS
320
(46 400)
525
(76 100)
435
(63 100)
760
(110 200)
0,93 e 435
(63 100)
L360NS or X52NS
L360QS or X52QS
L360MS or X52MS

360
(52 200)
530
(76 900)
460
(66 700)
760
(110 200)
0,93 e 460
(66 700)
L390QS or X56QS
L390MS or X56MS
390
(56 600)
545
(79 000)
490
(71 100)
760
(110 200)
0,93 e 490
(71 100)
L415QS or X60QS
L415MS or X60MS
415
(60 200)
565
(81 900)
520
(75 400)
760
(110 200)
0,93 e 520
(75 400)
L450QS or X65QS
L450MS or X65MS
450
(65 300)
600
(87 000)
535
(77 600)
760
(110 200)
0,93 e 535
(77 600)
L485MS or X70MS 485
(70 300)
635
(92 100)
570
(82 700)
760
(110 200)
0,93 e 570
(82 700)

Mechanical Requirement for API 5L X42 SSC Tested Pipe

Table H.2 ----Requirements for the results of Tensile Tests

Pipe steel grade Pipe body of SMLS and welded Pipes Weld seam of HFW and SAW Pipes
Yield strength a

Rto,5
Mpa (psi)

Tensile strength a

Rm
Mpa (psi)
Ratio b

Rto,5/Rm

Elongation on 50 mm
or 2 in

Af
%
Tensile strength c

Rm
Mpa (psi)
minimum maximum minimum maximum maximum minimum minimum
L245NS or BNS
L245QS or BQS
L245MS or BMS
245
(35 500)
450 d
(65 300) d
415
(60 200)
760
(110 200)
0,93 e 415
(60 200)
L290NS or X42NS
L290QS or X42QS
L290MS or X42MS
290
(42 100)
495
(71 800)
415
(60 200)
760
(110 200)
0,93 e 415
(60 200)
L320NS or X46NS
L320QS or X46QS
L320MS or X46MS
320
(46 400)
525
(76 100)
435
(63 100)
760
(110 200)
0,93 e 435
(63 100)
L360NS or X52NS
L360QS or X52QS
L360MS or X52MS

360
(52 200)
530
(76 900)
460
(66 700)
760
(110 200)
0,93 e 460
(66 700)
L390QS or X56QS
L390MS or X56MS
390
(56 600)
545
(79 000)
490
(71 100)
760
(110 200)
0,93 e 490
(71 100)
L415QS or X60QS
L415MS or X60MS
415
(60 200)
565
(81 900)
520
(75 400)
760
(110 200)
0,93 e 520
(75 400)
L450QS or X65QS
L450MS or X65MS
450
(65 300)
600
(87 000)
535
(77 600)
760
(110 200)
0,93 e 535
(77 600)
L485MS or X70MS 485
(70 300)
635
(92 100)
570
(82 700)
760
(110 200)
0,93 e 570
(82 700)

a for intermediate grades, the difference between the specified maximum yield strength and the specified minimum yield strength shall be as given in the table for the next higher grade, and the difference between the specified minimum tensile strength and the specified minimum yield strength shall be as given in the table for the next higher grade, for intermediate grades, the tensile strength shall be ≤ 760 MPa (110 200 psi).

b This limit applies for pipe with D >323, 9 mm (12.750 in).

c for intermediate grades, the specified minimum tensile strength for the weld seam shall be the same value as was determined for the pipe body using footnote a).

d for pipe with D< 219,1 mm (8.625 in), the maximum yield strength shall be ≤495 MPa (71 800 psi).

e The specified minimum elongation, Af, on 50mm or 2 in, expressed in percent and rounded to the nearest percent, shall be as determined using the following equation:

api5l pipe elongation values

Where

C is 1 940 for calculations using SI units and 625 000 for calculations using USC units;

A xc is the applicable tensile test piece cross-sectional area, expressed in square millimeters (square inches), as follows:

---- for circular cross-section test pieces, 130 mm2 (0.20 in2) for 12,5 mm (0.500 in) and 8,9 mm (0.350 in) diameter test pieces; and 65 mm2 ( 0.10 in2) for 6,4 mm (0.250 in) diameter test pieces;

---- for full-section test pieces, the lesser of a) 485 mm2 (0.75 in2) and b) the cross-sectional area of the test piece, derived using the specified outside diameter and the specified wall thickness of the pipe, rounded to the nearest 10 mm2 (0.01 in2)

---- for strip test pieces, the lesser of a) 485 mm2( 0.75 in2) and b) the cross-sectional area of the test piece, derived using the specified width of the test piece and the specified wall thickness of the pipe, rounded to the nearest_10 mm2 (0.01 in2);

U is the specified minimum tensile Strength, expressed in megapascals (pounds per square inch).

H.4.3 HIC/SWC test

The test for evaluation of resistance-to hydrogen- induced cracking shall meet the following acceptance criteria, with each ratio being the maximum permissible average for three sections per test specimen when tested in solution (Environment) A (see ISO 15156-2:2003, Table B.3):

a) crack sensitivity ratio (CSR) ≤ 2 %;

b) crack length ratio (CLR) ≤ 15 %;

c) crack thickness ratio (CTR) ≤ 5 %;

If HIC/SWC tests are conducted in alternative . media (see H.7.3.1.3) to simulate specific service conditions, alternative acceptance criteria may be agreed.

H.4.4 Hardness test

For test pieces subjected to a hardness test (see H.7.3), the hardness in the pipe body, the weld and HAZ shall be ≤ 250 HV10 or 22 HRC (70,6 HR 15N).

The maximum acceptabie hareness of an unexposed weld cap and external surface HAZ and base metal may be 275 HV10 or 26 HRC (73,0 HR 15N) where the equipment user agrees to the alternative weld cap hardness limit, the parent pipe wall thickness is greater than 9 mm, the weld cap is not exposed directly to the sour environment and the escape of hydrogen is not impeded, e.g by cathodic protection.

API 5L X42 SSC Tested Pipe Comparative Piping Specification

The information here is summarized from ASTM Standards and API Specification 5L. Please see the specific standards for more information.

API Specification PSL 1 and PSL 2 Comparison information.

Grade Range A25 Through X70 Gr B Through X80 Table 1
Size Range 0.405 Through 80 4-2/1 Through 80 Table 1
Type Of Pipe Ends Plain-End, Threaded-end, Bevelled-End, Special Coupling Pipe Plain-End Table 1
Seam Welding All Methods Continous Welding Limited to Grade A25 All Methods Except Continous And Laser Welding Table 1
Electric Welds: Welder Frequency No Minimum 100 Khz Minimum 5.1.3.3.2
Heat Treatments of Electric Welds Required For Grades > X42 Required For All Grades (Gr B Through X80) 5.1.3.3.1; J.3.3.2:6.2.7
Chemistry: Max C For Seamless Pipe 0.28% For Grades > Gr B 0.24% tables 2a, 2b
Chemistry: Max C For Welded Pipe 0.26% For Grades > Gr B 0.22% tables 2a, 2b
Chemistry: Max P 0.03% 0.03% Tables 2a, 2b
Chemistry: Max S Only When Purchases Specifies Sr18 0.02% Tables 2a, 2b
Carbon Equivalent None Maximum Required for Each Grade 4.2:4.3:6.1.3: Sr15.1
Yield Strength, Maximum None Maximum for Each Grade tables 3a, 3b
UTS, Maximum None Required Maximum For Each Grade Tables 3a, 3b
Fracture Toughness Only When Purchaser Specifies Sr4 Required For All Grades 6.2.6; 9.3.5: 9.8.4; 9.10.7;
Non-destructive Inspection of Seamless Pipes Permitted sr4 Mandatory table 14 9.7.2.6
Repair By Welding of Pipe Body, Plate And Skelp Permitted By Agreement Prohibited 5.3.2;9.7.6: B.1;b.2
Certification Certificates When Specified Per Sr15 Prohibited 4.3;9.7.4.4;9.7.6;b.1.2;b.4
Traceability Traceable Only Until All Tests are Passed Unless Sr15 Is Specified Certificates (Sr15.1) Mandatory
Traceable After Completion of Tests (Sr15.2) Mandatory
12.1
5.6

Chemical Requirement of API 5L X42 SSC Tested Pipe

API 5L Specifications Covers Seamless and Welded pipe suitable for use in conveying Shale Gas, Natural Gas water, and Groundwater oil, and other liquefied media such as Ethanol and Gasoline The attached requirements cover our offering of API 5L 45th Ed, PSL 1Seamless and Welded; API 5L 45th Ed PSL 2 Seamless & Welded; and API 5L 45th Ed PSL2 Welded only.

Tensile Properties for Seamless and Welded API 5L SSC Tested Steel Pipe
tensile properties data for Seamless and Welded API 5L steel pipe API 5L 45th Ed PSL 1, PSL 2.

Testing Req for Seamless and Welded API 5L SSC Tested steel Pipe and Carbon Steel Pipe
Our API 5L Seamless Pipes hydrostatic and mechanical testing information for all sizes and grades covered by the specification.

Permissible Variation for Seamless and Welded API 5L SSC Tested steel Pipe

Grade A, B, A25 X42 through X80
NPS 2-1/2 and smaller --Seamless and Welded, % +20 -- 12.5 +15 -- 12.5
NPS 3 --Seamless and Welded, % +18 -- 12.5 +15 -- 12.5
NPS 4 through 18 --Seamless and Welded, % +15 -- 12.5 +15 -- 12.5
NPS 20 and larger -- Welded, % +17.5 -- 10.0 +19.5 -- 8.0
NPS 20 and larger -- Seamless, % +15.0 -- 12.5 +17.5 -- 10.0

Marking Requirements

Paint-stenciled or die-stamped manufacturer’s name or mark, Spec 5L, size, weight per foot, grade, process of manufacture, type of steel, length (NPS 4 and larger only). Test pressure when higher than tabulated (NPS 2 and larger only)

Supplemental Annexes for API 5L SSC TestedSeamless and Welded steel Pipe

  • API Specification 5L contains 15 Supplemental Annexes that address special conditions and/or additional requirements.

SSC test procedure, SSC tested Carbon Steel, SSC test Wikipedia, SSC test acceptance criteria, ssc testing, SSC test for Seamless Pipe, SSC test for Stainless Steel, SSC test report, sour service material selection, what is sour service in oil and gas, sour service requirements, sour service line pipe, sour service Pipeline, material selection for sour service environment, what is non sour service in oil and gas, sour service wiki, API 5L X42, X46, X52, X56, X60, X65, X70 Pipe SSC Tested Pipe, SOUR Service Pipe, API 5L SSC Line Pipe, SSC Tested Line Pipe, SOUR Service Line Pipes We provide API 5L SSC Tested SOUR Service Pipe in Grade B, X42, X46, X52, X56, X60, X65 with PSL1 and PSL2. We Carry Complete Range from 3/8" NB to 24" NB, wall Thicknesss upto 200 MM. Prosaic Steel and Alloys API 5L Grade B Pipe are known for its High Quality High Temperature and Competitive Price.

API 5L X42 SSC Tested Pipes of Top Approved Companies

API 5L Grade B Pipe Sabic Approved, A671 CC60 Pipe Sabic Approved, A671 CC65 Pipe Sabic Approved, A671 CC70 Pipe Sabic Approved, A671 CC60 Pipe Class 12, 22, 32 Sabic Approved, A671 CC65 Pipe Class 12, 22, 32 Sabic Approved, A671 CC65 Pipe Class 12, 22, 32 Sabic Approved, A671 CC70 Pipe Class 12, 22, 32 Sabic Approved, A671 CC60, CC65, CC70 Pipe Sabic Approved, ASTM A671 Pipe LSAW Weded EFW Sabic ApprovedSabic Saudi Arabia) API 5L Grade B Pipe ROYAL DUTCH SHELL Approved, API 5L X42 Pipe ROYAL DUTCH SHELL Approved, API 5L X46 Pipe ROYAL DUTCH SHELL Approved, API 5L X52 Pipe ROYAL DUTCH SHELL Approved, API 5L X56 Pipe ROYAL DUTCH SHELL Approved, API 5L X60 Pipe ROYAL DUTCH SHELL Approved, API 5L X60 Pipe ROYAL DUTCH SHELL Approved, API 5L X65 Pipe ROYAL DUTCH SHELL Approved, API 5L X70 Pipe ROYAL DUTCH SHELL Approved, API 5L Line Pipe ROYAL DUTCH SHELL ApprovedShell API 5L Grade B Pipe ALBA Approved, A671 CC60 Pipe ALBA Approved, A671 CC65 Pipe ALBA Approved, A671 CC70 Pipe ALBA Approved, A671 CC60 Pipe Class 12, 22, 32 ALBA Approved, A671 CC65 Pipe Class 12, 22, 32 ALBA Approved, A671 CC65 Pipe Class 12, 22, 32 ALBA Approved, A671 CC70 Pipe Class 12, 22, 32 ALBA Approved, A671 CC60, CC65, CC70 Pipe ALBA Approved, ASTM A671 Pipe LSAW Weded EFW ALBA ApprovedALBA (Saudi Arabia) API 5L Grade B Pipe QAFCO Approved, A671 CC60 Pipe QAFCO Approved, A671 CC65 Pipe QAFCO Approved, A671 CC70 Pipe QAFCO Approved, A671 CC60 Pipe Class 12, 22, 32 QAFCO Approved, A671 CC65 Pipe Class 12, 22, 32 QAFCO Approved, A671 CC65 Pipe Class 12, 22, 32 QAFCO Approved, A671 CC70 Pipe Class 12, 22, 32 QAFCO Approved, A671 CC60, CC65, CC70 Pipe QAFCO Approved, ASTM A671 Pipe LSAW Weded EFW QAFCO ApprovedQAFCO(Qatar) API 5L Grade B Pipe MAADEN Approved, A671 CC60 Pipe MAADEN Approved, A671 CC65 Pipe MAADEN Approved, A671 CC70 Pipe MAADEN Approved, A671 CC60 Pipe Class 12, 22, 32 MAADEN Approved, A671 CC65 Pipe Class 12, 22, 32 MAADEN Approved, A671 CC65 Pipe Class 12, 22, 32 MAADEN Approved, A671 CC70 Pipe Class 12, 22, 32 MAADEN Approved, A671 CC60, CC65, CC70 Pipe MAADEN Approved, ASTM A671 Pipe LSAW Weded EFW MAADEN ApprovedMaaden(Saudi Arabia) API 5L Grade B Pipe KNPC Approved, A671 CC60 Pipe KNPC Approved, A671 CC65 Pipe KNPC Approved, A671 CC70 Pipe KNPC Approved, A671 CC60 Pipe Class 12, 22, 32 KNPC Approved, A671 CC65 Pipe Class 12, 22, 32 KNPC Approved, A671 CC65 Pipe Class 12, 22, 32 KNPC Approved, A671 CC70 Pipe Class 12, 22, 32 KNPC Approved, A671 CC60, CC65, CC70 Pipe KNPC Approved, ASTM A671 Pipe LSAW Weded EFW KNPC ApprovedKNPC(Kuwait)
API 5L Grade B Pipe KOC Approved, A671 CC60 Pipe KOC Approved, A671 CC65 Pipe KOC Approved, A671 CC70 Pipe KOC Approved, A671 CC60 Pipe Class 12, 22, 32 KOC Approved, A671 CC65 Pipe Class 12, 22, 32 KOC Approved, A671 CC65 Pipe Class 12, 22, 32 KOC Approved, A671 CC70 Pipe Class 12, 22, 32 KOC Approved, A671 CC60, CC65, CC70 Pipe KOC Approved, ASTM A671 Pipe LSAW Weded EFW KOC ApprovedKuwait Oil Sands Company(Kuwait) API 5L Grade B Pipe QATAR PETROLEUM Approved, A671 CC60 Pipe QATAR PETROLEUM Approved, A671 CC65 Pipe QATAR PETROLEUM Approved, A671 CC70 Pipe QATAR PETROLEUM Approved, A671 CC60 Pipe Class 12, 22, 32 QATAR PETROLEUM Approved, A671 CC65 Pipe Class 12, 22, 32 QATAR PETROLEUM Approved, A671 CC65 Pipe Class 12, 22, 32 QATAR PETROLEUM Approved, A671 CC70 Pipe Class 12, 22, 32 QATAR PETROLEUM Approved, A671 CC60, CC65, CC70 Pipe QATAR PETROLEUM Approved, ASTM A671 Pipe LSAW Weded EFW QATAR PETROLEUM ApprovedQatar Petroleum(Qatar) API 5L Grade B Pipe PDO Approved, A671 CC60 Pipe PDO Approved, A671 CC65 Pipe PDO Approved, A671 CC70 Pipe PDO Approved, A671 CC60 Pipe Class 12, 22, 32 PDO Approved, A671 CC65 Pipe Class 12, 22, 32 PDO Approved, A671 CC65 Pipe Class 12, 22, 32 PDO Approved, A671 CC70 Pipe Class 12, 22, 32 PDO Approved, A671 CC60, CC65, CC70 Pipe PDO Approved, ASTM A671 Pipe LSAW Weded EFW PDO ApprovedPetroleum Development Oman(Oman) API 5L Grade B Pipe ADNCO Approved, A671 CC60 Pipe ADNCO Approved, A671 CC65 Pipe ADNCO Approved, A671 CC70 Pipe ADNCO Approved, A671 CC60 Pipe Class 12, 22, 32 ADNCO Approved, A671 CC65 Pipe Class 12, 22, 32 ADNCO Approved, A671 CC65 Pipe Class 12, 22, 32 ADNCO Approved, A671 CC70 Pipe Class 12, 22, 32 ADNCO Approved, A671 CC60, CC65, CC70 Pipe ADNCO Approved, ASTM A671 Pipe LSAW Weded EFW ADNCO ApprovedADNOC(United Arab Emirates) API 5L Grade B Pipe ORPIC Approved, A671 CC60 Pipe ORPIC Approved, A671 CC65 Pipe ORPIC Approved, A671 CC70 Pipe ORPIC Approved, A671 CC60 Pipe Class 12, 22, 32 ORPIC Approved, A671 CC65 Pipe Class 12, 22, 32 ORPIC Approved, A671 CC65 Pipe Class 12, 22, 32 ORPIC Approved, A671 CC70 Pipe Class 12, 22, 32 ORPIC Approved, A671 CC60, CC65, CC70 Pipe ORPIC Approved, ASTM A671 Pipe LSAW Weded EFW ORPIC ApprovedOrpic(Oman) API 5L Grade B Pipe TAKREER Approved, A671 CC60 Pipe TAKREER Approved, A671 CC65 Pipe TAKREER Approved, A671 CC70 Pipe TAKREER Approved, A671 CC60 Pipe Class 12, 22, 32 TAKREER Approved, A671 CC65 Pipe Class 12, 22, 32 TAKREER Approved, A671 CC65 Pipe Class 12, 22, 32 TAKREER Approved, A671 CC70 Pipe Class 12, 22, 32 TAKREER Approved, A671 CC60, CC65, CC70 Pipe TAKREER Approved, ASTM A671 Pipe LSAW Weded EFW TAKREER ApprovedTakreer(Abu Dhabi)
API 5L Grade B Pipe YASREF Approved, A671 CC60 Pipe YASREF Approved, A671 CC65 Pipe YASREF Approved, A671 CC70 Pipe YASREF Approved, A671 CC60 Pipe Class 12, 22, 32 YASREF Approved, A671 CC65 Pipe Class 12, 22, 32 YASREF Approved, A671 CC65 Pipe Class 12, 22, 32 YASREF Approved, A671 CC70 Pipe Class 12, 22, 32 YASREF Approved, A671 CC60, CC65, CC70 Pipe YASREF Approved, ASTM A671 Pipe LSAW Weded EFW YASREF ApprovedYASREF(Abu Dhabi) API 5L Grade B Pipe PETROBRAS Approved, A671 CC60 Pipe PETROBRAS Approved, A671 CC65 Pipe PETROBRAS Approved, A671 CC70 Pipe PETROBRAS Approved, A671 CC60 Pipe Class 12, 22, 32 PETROBRAS Approved, A671 CC65 Pipe Class 12, 22, 32 PETROBRAS Approved, A671 CC65 Pipe Class 12, 22, 32 PETROBRAS Approved, A671 CC70 Pipe Class 12, 22, 32 PETROBRAS Approved, A671 CC60, CC65, CC70 Pipe PETROBRAS Approved, ASTM A671 Pipe LSAW Weded EFW PETROBRAS ApprovedPetrobras(Brazil) API 5L Grade B Pipe PETRONAS Approved, A671 CC60 Pipe PETRONAS Approved, A671 CC65 Pipe PETRONAS Approved, A671 CC70 Pipe PETRONAS Approved, A671 CC60 Pipe Class 12, 22, 32 PETRONAS Approved, A671 CC65 Pipe Class 12, 22, 32 PETRONAS Approved, A671 CC65 Pipe Class 12, 22, 32 PETRONAS Approved, A671 CC70 Pipe Class 12, 22, 32 PETRONAS Approved, A671 CC60, CC65, CC70 Pipe PETRONAS Approved, ASTM A671 Pipe LSAW Weded EFW PETRONAS ApprovedPetronas(Malaysia) API 5L Grade B Pipe NIOC Approved, A671 CC60 Pipe NIOC Approved, A671 CC65 Pipe NIOC Approved, A671 CC70 Pipe NIOC Approved, A671 CC60 Pipe Class 12, 22, 32 NIOC Approved, A671 CC65 Pipe Class 12, 22, 32 NIOC Approved, A671 CC65 Pipe Class 12, 22, 32 NIOC Approved, A671 CC70 Pipe Class 12, 22, 32 NIOC Approved, A671 CC60, CC65, CC70 Pipe NIOC Approved, ASTM A671 Pipe LSAW Weded EFW NIOC ApprovedNIOC(Iran) API 5L Grade B Pipe NPDC Approved, A671 CC60 Pipe NPDC Approved, A671 CC65 Pipe NPDC Approved, A671 CC70 Pipe NPDC Approved, A671 CC60 Pipe Class 12, 22, 32 NPDC Approved, A671 CC65 Pipe Class 12, 22, 32 NPDC Approved, A671 CC65 Pipe Class 12, 22, 32 NPDC Approved, A671 CC70 Pipe Class 12, 22, 32 NPDC Approved, A671 CC60, CC65, CC70 Pipe NPDC Approved, ASTM A671 Pipe LSAW Weded EFW NPDC ApprovedNPDC(Nigeria) API 5L Grade B Pipe EGPC Approved, A671 CC60 Pipe EGPC Approved, A671 CC65 Pipe EGPC Approved, A671 CC70 Pipe EGPC Approved, A671 CC60 Pipe Class 12, 22, 32 EGPC Approved, A671 CC65 Pipe Class 12, 22, 32 EGPC Approved, A671 CC65 Pipe Class 12, 22, 32 EGPC Approved, A671 CC70 Pipe Class 12, 22, 32 EGPC Approved, A671 CC60, CC65, CC70 Pipe EGPC Approved, ASTM A671 Pipe LSAW Weded EFW EGPC ApprovedEgyptian General petroleum Corporation(Egypt)

Buy API 5L Grade B SSC Tested Pipe in Stock through our store at Cheap Prices

  • API SPEC 5L X42 ISO 3183 SSC Tested Pipe
  • API 5L X42 Bare coating SSC Tested Pipe
  • API 5L X42 Spiral Welded SSC Tested Pipe
  • API 5L X42 SCH 80 SSC Tested Pipes
  • API 5L Grade X42 natural gas SSC Tested Pipe
  • hot-dipped galvanized steel API 5L X42 SSC Tested Pipe
  • API 5L X42 Plain End SSC Tested Pipe
  • API 5L X42 SSC Tested Pipes for petroleum and natural gas industries
  • API 5L X42 High Carbon equivalent SSC Tested Pipe
  • API 5L L290 High Pressure SSC Tested Pipe
  • Thread with Coupling or cap API 5L X42 SSC Tested Pipe
  • API 5L X42 3LPE Coated SSC Tested Pipe
  • API 5L X42 3PE Coated SSC Tested steel Pipe
  • Hot Finished Carbon Steel API 5L X52 SSC Tested Pipe
  • API 5L X42 Steel Welded SSC Tested Pipe stockholders
  • API 5L X42 SSC Tested Oil Pipe dealers
  • API 5L X42 Threaded SSC Tested Pipe
  • API 5L X42 Varnish coating SSC Tested Pipe
  • Offshore Service API 5L X42 SSC Tested Pipe
  • API 5L X42 X42 SSC Tested Pipes
  • API 5L L290 PSL2 SSC Tested Pipe Traders
  • CS API 5L X42 SSC Tested Pipe Supplier in Malaysia
  • API 5L X42 3LPP Coated SSC Tested Pipe
  • API 5L X42 SCH STD SSC Tested Pipe
  • API 5L grade L290 SSC Tested Piping Exporter
  • API 5L X42 Square SSC Tested Pipe
  • API 5L X42 Grade SSC Tested Pipe
  • API 5L L290 CS SSC Tested Pipe Distributors
  • API 5L X42 heavier wall ERW SSC Tested Pipe in India
  • API 5L X42 SSC Tested Fluid Pipe
  • API 5L X42 Bevel Ended SSC Tested Pipes
  • API 5L X42 Big Diameter SSC Tested Pipe
  • API 5L X42 SSC Tested Pipe for Structure or Fluid Transportation
  • API 5L X42 Black Coated Material SSC Tested Pipe
  • API Spec 5L X42 Coated SSC Tested Pipe
  • API 5L X42 Casing SSC Tested Pipe
  • API 5L X42 Round SSC Tested Pipe
  • Industrial API 5L X42 Steel SSC Tested Pipe
  • API 5L X42 Anti-Corrosion Coating SSC Tested Pipe
  • API 5L X42 Hollow Section SSC Tested Pipes
  • API 5L X42 SSC Tested Tubes, Tubos / Tubing / Tubular
  • CS API 5L X42 SSC Tested Pipe Stockyards in Mumbai India
  • API 5L X42 rectangular SSC Tested Pipe
  • API 5L X42 Carbon Steel SSC Tested Pipe for Oil and Gas Industry
  • Black Oil Paint API 5L X42 SSC Tested Pipes exporter in Mumbai
  • JIS Standard API 5L Grade L360 SSC Tested Pipe
  • API 5L X42 Oiled painted SSC Tested Pipes
  • Three Layer Polypropelene Coating API 5L L290 SSC Tested Oilfield Pipe
  • API SPEC 5L X42 steel SSC Tested pipe Stocks
  • API 5L X42 Galvanized (GI) SSC Tested Pipe
  • API 5L X42 Carbon Steel Sour Service SSC Tested Pipe
  • API Spec 5L X42 Big Diameter SSC Tested Pipe
  • SSC Tested API 5L X42 Fusion Bonded Epoxy Coated line pipe
  • API 5L L290 SSC Tested Carbon Steel Pipe
  • API 5L Gr. X42 Sour Service CTE Coating SSC Tested Pipe
  • High yield API 5L X42 SSC Tested Seamless Pipe Supplier
  • API 5L Grade X42 Structural Steel SSC Tested Pipe
  • API 5L X42 Black Steel SSC Tested Pipe in Thailand
  • DIN Standard API 5L L290 SSC Tested Pipe
  • API Standard Spec 5L X42 SSC Tested Pipes
  • API X52 SSC Tested FBE Coating Pipe Exporter in Indonesia
  • API 5L L290 PSL1 SSC Tested Pipe in Mumbai
  • ASTM/ASME Standard API 5L X42 SSC Tested Steel Pipe
  • Carbon Steel API 5L X42 SSC Tested Pipe in Singapore
  • API 5L X42 / L290 SSC Tested Petroleum Pipe
  • API 5L X42 Coaltar Enamel Coating SSC Tested Pipe
  • API 5L Carbon Steel X42 SSC Tested Pipes in Turkey

Supplying API 5L X42 SSC Tested Pipe to Countries

We Export API 5L X42 SSC Tested Pipe to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc

Savoy Piping Inc. is a well known worldwide exporter of API 5L X42 SSC Tested Pipes committed to provide each and every customer with the highest standard of customer service. We deals in API 5L X42 SSC Tested Pipe in India and Overseas, offering a wide range of API 5L X42 SSC Tested Pipes




PRODUCTS