Delivering High Quality Stainless Steel and Alloy Piping Products — Pipes, Tubes, Fittings, Flanges and more for Global Industries.
sales@savoypipinginc.com
Delivering High Quality Stainless Steel and Alloy Piping Products — Pipes, Tubes, Fittings, Flanges and more for Global Industries.
sales@savoypipinginc.com
Savoy Piping Inc. supplies ASTM A210 Grade A1 (ASME SA210 Gr A1) seamless medium-carbon steel tubes for boilers, boiler flues, superheaters and safe ends.
Typical properties: tensile min 415 MPa (60 ksi), yield min 255 MPa (37 ksi), elongation min 30%, hardness max 79 HRB. Chemistry: C max 0.27%, Mn max 0.93%, Si min 0.10%.
Related: A210 Grade C, A179 / SA179, A192, Carbon Steel Hub.
A210 / SA210 covers seamless medium-carbon steel tubes intended for boiler and superheater service. Grade A1 is the standard commercial grade; Grade C is the higher-strength option when specified.
Also see: Carbon steel seamless hub · API 5L hub · CS buttweld.
A179 = low-carbon cold-drawn HX/condenser. A192 = high-pressure boiler tube. A210 A1 = medium-carbon boiler/superheater tube with higher strength than A179. Quote the equipment specification — do not swap grades on OD match alone.
| A210 Grade A1 Seamless Tubes Specification | ASTM A210 / ASME SA210 |
| A210 Grade A1 Seamless Tubes Grades | ASTM A210 Grade A1 / ASME SA210 Grade A1 /ASTM A210 Grade C / ASME SA210 Grade C |
| A210 Grade A1 Seamless Tubes Type | Seamless - Hot Rolled / Cold Drawn |
| A210 Grade A1 Seamless Tubes Outer Diameter Size | 1/4" NB to 2" NB (Nominal Bore Size) |
| A210 Grade A1 Seamless Tubes Wall Thickness | 1 mm Thickness to 8 mm Thickness |
| A210 Grade A1 Seamless Tubes Length | 5800mm; 6000mm; 6096mm; 7315mm; 11800mm; and so on. Max length: 27000mm, also U bending can be offered. |
| A210 Grade A1 Seamless Tubes Ends | Plain Ends / Beveled Ends / Coupling |
| A210 Grade A1 Seamless Tubes Delivery Conditions | As Rolled, Cold Drawn, Normalizing Rolle |
| A210 Grade A1 Seamless Tubes Coating | Epoxy Coating / Colour Paint Coating / 3LPE Coating. |
| A210 Grade A1 Seamless Tubes Other Testing | NACE MR0175, NACE TM0177, NACE TM0284, HIC TEST, SSC TEST, SWC, H2 SERVICE, IBR, PWHT etc. |
| A210 Grade A1 Seamless Tubes Dimension | All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM, ASME, API. |
| A210 Grade A1 Seamless Tubes Value Added Services | Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Galavanizing / Heat Treatment |
| A210 Grade A1 Seamless Tubes Packaging | Loose / Bundle / Wooden Pallet / Wooden box-a / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector |
| A210 Grade A1 Seamless Tubes Shipment & Transportation | By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 4 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes |
| A210 Grade A1 Seamless Tubes Material Test Certificate | Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC |
Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
This specification covers seamless medium-carbon steel boiler and superheater tubes. The specification also covers minimum-wall-thickness, tubing sizes, boiler flues including safe ends, arch and stay tubes. The specification provides tensile and hardness properties but only applicable to certain size limitations. Material manufacturing shall be killed. Tubes shall be made by seamless process, marked as either hot-finished or cold-finished. Surface condition shall be specifically stated in the order. Chemical composition shall conform to the requirements. Elemental composition other than listed here shall not be permitted. Tension test, flattening test, flaring test, hardness test, hydrostatic or nondestructive electric test shall be made on specimens. Superheater Tubes shall be formed without defects and shall withstand expansion, beading, forging, welding, and bending.
This specification covers minimum-wall-thickness, seamless medium-carbon Stainless Steel, Boiler Tubes and boiler flues, including safe ends (see Note 1), arch and stay tubes, and superheater tubes.Note 1—This type is not suitable for safe ending by forge welding. The tubing sizes and thicknesses usually furnished to this specification are 1/2 in. to 5 in. [12.7 to 127 mm] in outside diameter and 0.035 to 0.500 in. [0.9 to 12.7 mm], inclusive, in minimum wall thickness. Tubing having other dimensions may be furnished, provided such Tubes comply with all other requirements of this specification.
Mechanical property requirements do not apply to tubing smaller than 1/8 in. [3.2 mm] in inside diameter or 0.015 in. [0.4 mm] in thickness. The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order.
| Grade | C(Max) | Mn | Si(Min) | P(Max) | S(Max) |
| A1 | 0.27 | Max.0.93 | 0.10 | 0.035 | 0.035 |
| C | 0.35 | 0.29~1.06 | 0.10 | 0.035 | 0.035 |
| Grade | Tensile Strength(Mpa) | Yield Strength(Mpa) | Elongation (%) |
| A1 | ≥ 415 | ≥ 255 | ≥ 30 |
| C | ≥ 485 | ≥ 275 | ≥ 30 |
| ASME SA-210 | OD | WT | WT Tolerance |
| <=38.1 | / | +20%,-0% | |
| >38.1 | / | +20%,-0% |
A210 Grade A1 / SA210 A1 covers seamless medium-carbon steel tubes for boilers, boiler flues, superheaters and safe ends — higher strength than low-carbon A179 exchanger tubing.
A179 is cold-drawn low-carbon HX/condenser tube. A210 A1 is medium-carbon boiler and superheater tube (tensile min 415 MPa, yield min 255 MPa). Use the spec named on the boiler/HX datasheet.
Grade C is stronger (tensile min 485 MPa, yield min 275 MPa) with higher carbon allowance. Order A1 unless the PO explicitly requires Grade C.
Yes. ASTM A210 / ASME SA210 Grade A1 tubes can be supplied with EN 10204 3.1 / 3.2 MTCs and IBR support when the purchase order requires it.
We Export ASTM A210 Grade A1 Seamless Tubes to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Myanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States of America, Canada, Mexico, Panama, Costa Rica, Puerto Rico, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherlands, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc
Savoy Piping Inc. is a well known worldwide Exporter of ASTM A210 Grade A1 Tubes is committed to provide each and every customer with the highest standard of customer service. We deal in ASTM A210 Grade A1 Tube in India and Overseas, offering a wide range of ASTM A210 Grade A1 Tubes