ASTM A213 TP316 Stainless Steel Seamless Pipes

ASTM A213 TP316 Seamless Stainless Tube

ASME SA213 · UNS S31600 · boiler / heater / heat-exchanger tube

Savoy Piping Inc. supplies ASTM A213 TP316 seamless tubes — the standard molybdenum-bearing austenitic grade — better pitting/crevice resistance than 304 in chlorides.

Grade hub · A312 Seamless · A312 Welded · A213 · A269 · A358 EFW · SS hub

Also see: Stainless seamless tube hub · SS pipe & tube hub · Instrumentation tubes.

What is A213 TP316?

316 seamless tube for heat-transfer service. Chemistry: 16–18% Cr, 10–14% Ni, 2–3% Mo. min tensile ~515 MPa (75 ksi), min yield ~205 MPa (30 ksi) typical — confirm PO.

Typical applications

• Boiler, superheater and heat-exchanger tubes
• Chemical and petrochemical process piping
• Coastal / marine-adjacent utilities (within 316 limits)
• Pharma and food where Mo-bearing stainless is specified

Selection guidance

Default Mo-bearing choice for chloride service below duplex. Prefer 316L for heavy welds; 316H / 316Ti for elevated temp / stabilised needs. Confirm OD × average/min wall, length and U-bend needs on the enquiry.

ASTM A213 TP316 Stainless Steel Seamless Pipes RANGE

Chemical Composition of ASTM A213 TP316 Stainless Steel Seamless Pipes

The chemical composition of grade 316 Stainless Steel is outlined in the following table

Mechanical Properties of ASTM A213 TP316 Stainless Steel Seamless Pipes

The Mechanical Properties of grade 316 Stainless Steel are displayed in the following table.

ASTM A213 TP316 Stainless Steel Seamless Pipes Physical Properties

Physical properties of 316 grade stainless steel in the annealed condition

grade Specification Comparison for ASTM A213 TP316 Stainless Steel Seamless Pipes

Grade specifications for 316 grade stainless steel

ASTM A213 TP316 Stainless Steel Seamless Pipes Apllicantion

The grade 316 steel can be made into plates, sheets, and coils to be used in the following:

• Food preparation equipment particularly in chloride environments.
• Laboratory benches & equipment.
• Coastal architectural panelling, railings & trim.
• Boat fittings.
• Chemical containers, including for transport.
• Heat Exchangers.
• Woven or welded screens for mining, quarrying & water filtration.
• Threaded fasteners.
• Springs.

ASTM A213 TP316 Stainless Steel Seamless Pipes Nominal Bore Sizes

• 1/2" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
• 3/4" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
• 1" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
• 1-1/4" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
• 1-1/2" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
• 2" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
• 2-1/2" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
• 3" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
• 3-1/2" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
• 4" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
• 5" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
• 6" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
• 8" NB in ThicknessSchedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
• 10" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
• 12" NB in ThicknessSchedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
• 14" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
• 16" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
• 18" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS

Frequently asked questions — ASTM A213 TP316 Seamless Tube

What is ASTM A213 TP316?

A213 covers seamless ferritic and austenitic alloy steel boiler, superheater and heat-exchanger tubes. TP316 is the 316 austenitic grade (UNS S31600).

A213 vs A269?

A213 is the boiler/HX tube specification with tighter heat-transfer product rules. A269 is general-service stainless tube.

A213 vs A312?

A312 is pipe; A213 is tube for heat-transfer duty. Do not interchange names on the PO.

Typical uses?

Chemical and petrochemical process piping; Coastal / marine-adjacent utilities (within 316 limits); Pharma and food where Mo-bearing stainless is specified

Supplying ASTM A213 TP316 Stainless Steel Seamless Pipes to Countries -

We export ASTM A213 TP316 Stainless Steel Seamless Pipes to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Myanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States of America, Canada, Mexico, Panama, Costa Rica, Puerto Rico, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherlands, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc

Savoy Piping Inc. is a well known worldwide Exporter of ASTM A213 TP316 Stainless Steel Seamless Pipes, Savoy Piping Inc. is committed to provide each and every customer with the highest standard of customer service. We deal in ASTM A213 TP316 Stainless Steel Seamless Pipe in India and Overseas, offering a wide range of ASTM A213 TP316 Stainless Steel Seamless Pipes .