Monel 400 Forged Fittings

Q: Socket weld or threaded — which end type?

Socket weld for permanent high-integrity joints; threaded where welding is restricted or disassembly is needed.

Monel 400 Socket Weld Fittings — ASTM B564 UNS N04400 (Monel 400)

Savoy Piping Inc. manufactures and supplies monel 400 socket weld fittings in socket weld and threaded ends for small-bore process and utility piping. Dimensions follow ASME B16.11 (and MSS SP-79 / SP-83 / SP-95 where applicable).

What is this material?

Monel 400 (UNS N04400) forged fittings are nickel-copper alloy socket weld and threaded fittings for seawater, hydrofluoric acid and reducing chemical service.

Selection guidance

Specify Monel 400 / UNS N04400, end type, NPS and class. Related nickel hubs cover Inconel, Incoloy and Hastelloy when a different Ni alloy is required.

What to put on the PO

Include material grade / ASTM class, end type (socket weld or threaded), fitting form, size, pressure class, quantity, destination, and documentation (EN 10204 3.1 / 3.2, PMI, NACE, TPI). Email sales@savoypipinginc.com.

Monel products

Browse grades and related pages in this material family

Monel 400 SW

Socket weld hub

Monel 400 Threaded

Screwed ends

Monel Swage Nipples

MSS SP-95

Monel Plugs

Closures

Inconel hub

600 / 625

Hastelloy C276

Ni-Mo-Cr

Fitting forms

Same material across elbows, tees, couplings, unions and more

90° Elbow

Socket weld / threaded

45° Elbow

Socket weld / threaded

Tee

Equal / reducing

Cross

Four-way branch

Full Coupling

Pipe-to-pipe

Half Coupling

Branch / outlet

Reducing Coupling

Size change

Union

Three-piece joint

Cap

Line end

Plug

Threaded closure

Bushing

Thread reducer

Boss

Weld-on outlet

Reducer Insert

MSS SP-79

Swage Nipples

MSS SP-95

Bull Plugs

MSS SP-95

Monel 400 Socket Weld Fitting Range

Monel 400 Socket Weld Fitting Specification	ASTM A182 / ASTM SA182, ASTM A105 / ASME SA105, ASTM A350 / ASME SA350, ASTM A694 / ASME SA694, ASTM B462 / ASME SB462 / ASTM B564 / ASME SB564, ASTM B366 / ASME SB366, ASTM B381 / ASME SB381
Monel 400 Socket Weld Fittings Manufacturing Process	Forging / Socket / Threaded / Screwed
Monel 400 Socket Weld Fittings Other Grades	Stainless Steel - F304, F304L, F304H, F310s, F316, F316L, F317L, F321, F347, F94L, F410, F446 etc. Carbon Steel - 105N, LF2, F42, F46, F52, F56, F60, F65 etc. Alloy Steel - F5, F9, F11, F22, F91, 4140, Class 1, 2, 3 etc. Duplex and Super Duplex - F51, F53, F55, UNS S31803, UNS S32750, UNS S32760 etc. Inconel - 600, 601, 625, 718, UNS N06600, UNS N06601, UNS N06625, UNS N07718 etc. Incoloy - 800, 800H, 800HT, 825, UNS N08800, UNS N08810, UNS N08811, UNS N08825 etc. Monel - 400, UNS N04400 etc. Hastelloy - C276, C22, UNS N10276, UNS N06022 etc. Titanium - Grade 2, Grade 3, UNS R50400, UNS R56200 etc. Copper Nickel - 90/10, 70/30, UNS C71500, UNS C70600 etc. Other - Alloy 20, SMO 254, F44, 6 Moly, UNS N08020, UNS N031254 etc.
Monel 400 Socket Weld Fittings Outer Diameter	1/8" NB TO 4" NB (DN6 to DN100)
Monel 400 Socket Weld Fittings Pressure Class	2000 LBS, 3000 LBS, 6000 LBS ,9000 LBS or As Per Custom Requirement
Monel 400 Socket Weld Fittings Types	45 Degree Elbow, 90 Degree Elbow, Lateral, Tee, Reducer Insert, Full Coupling, Half Coupling, Reducing Coupling, Cap, Union, Cross, Boss, Plug, Bushing etc.
Monel 400 Socket Weld Fittings Dimension	ASME 16.11 - Socket Welding and Threaded Forged Fittings MSS SP-79 - Socket Welding Reducer Inserts MSS SP-83 - Socket Weld Union MSS SP-95 - Swage(d) Nipples and Bull Plugs BS 3799 - Specification for Steel Pipe Fittings, Screwed and Socket-welding for the petroleum industry.
Monel 400 Socket Weld Fittings Other Testing	Tensile, Hardness Test, Chemical Analysis – Spectro Analysis, Positive Material Identification – PMI Testing, Flattening Test, Micro and Macro Test, Pitting Resistance Test, Flaring Test, Intergranular Corrosion (IGC) Test, NACE MR0175, Ultrasound Test, ASTM A262 Practice E, Charpy Impact Test, Grain Size, Dye Penetrant Test etc.
Monel 400 Socket Weld Fittings Packaging	Carrate / Wooden Pallet / Wooden box-a
Monel 400 Socket Weld Fittings Shipment & Transportation	By Road - Truck / Train Partial Load, Full Load, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 4 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes
Monel 400 Socket Weld Fittings Material Test Certificate	Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS, Bureau of Indian Standards BIS Approved ETC

Monel 400 Socket Weld Fittings Chemical Composition and Mechanical Properties

The chemical composition of Monel 400 Socket Weld Fittings is outlined in the following table

Nickel-Copper Alloy UNS N04400
Alloy Name	Nickel	Copper	Iron	Manganese	Carbon	Silicon	Sulfur, max
Monel 400	63.0 min	28.0-34.0	2.5 max	2.0 max.	0.3 max.	0.5 max.	0.024

Material and Condition	Maximum Section Thickness, in. (mm)	Tensile Strength, min, ksi [MPa]	Yield Strength, min, ksi [MPa]	Elongation in 2 in. [50 mm] or 4D,min, %
Nickel-Copper Alloy UNS N04400, Annealed	-	70 [483]	25 [172]	35

Monel 400 Socket Weld Fittings is in Ready Stock and Ready to Deliver. High Quality, Lower Costing with Best Service in Socketweld Fittings.

Typical applications

Seawater and marine piping
HF and reducing chemical service
Oil & gas sour / chloride packages
Desalination and brine lines

Frequently asked questions

What are Monel 400 Forged Fittings?

Monel 400 Socket Weld Fittings are forged small-bore fittings in this material family, supplied with socket weld or threaded ends to ASME B16.11. Size, class and grade must match the piping class.

Which standards apply?

Material: ASTM B564 UNS N04400 (Monel 400). Dimensional: ASME B16.11 for most forged fittings; MSS SP-79 / SP-83 / SP-95 where applicable.

Socket weld or threaded — which end type?

Socket weld is preferred for permanent, high-integrity small-bore joints. Threaded (NPT/BSPT) is used where welding is restricted or future disassembly is needed.

What should be on the purchase order?

Material grade / ASTM class, end type, fitting form, size, pressure class, quantity, destination, and documentation (EN 10204 3.1 or 3.2, PMI, NACE, TPI if required). Email sales@savoypipinginc.com.

Monel 400 Socket weld Fittings Exported Countries
We Export Monel 400 Socket weld Fittings to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Myanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States Of America, Canada, Mexico, Panama, Costa Rica, Puerto Rico, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherlands, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc

Monel 400 Socket weld Fittings Supplying in States and Cities
We Supply Monel 400 Socket weld Fittings Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Mumbai, Navi Mumbai, Pune, Nashik, Nagpur, Solapur, Kolhapur, Ambernath, Ahmednagar, Latur, Ahmadabad, Surat, Rajkot, Vadodara, Panaji, Madgaon, Chennai, Kolkata, Hyderabad, Bengaluru, Delhi, New Delhi, Ludhiana, Chandigarh, Raipur, Bhopal, Jamshedpur, Vishakhapatnam, Cochin, Ghaziabad, Noida, Gurugram, Bhillai, Durgapur, Vijaywada, Kanpur etc.

Savoy Piping Inc., is a well known worldwide Exporter of Monel 400 Socket weld Fittings, Savoy Piping Inc., is committed to provide each and every customer with the highest standard of customer service. We deal in Monel 400 Socket weld Fittings in India and Overseas, offering a wide range of Monel 400 Alloy Socketweld Fittings

Monel 400 class 3000 fittings pressure rating, 150# IMonel 400 socket weld fittings, b16.11 pressure rating, ansi 3000 pressure rating, class 900 fittings pressure rating, Monel 400 class 300 fittings pressure rating, Monel 400 ss class 3000 pipe fittings pressure rating, asme b16.11 class 3000, class 6000 fittings, Monel 400 pipe coupling dimensions, steel pipe fitting dimensions chart, Monel 400 Monel 400 socket weld fittings, Monel 400 forged fittings price list, Monel 400 forged fittings price, asme b16.11 fittings, Monel 400 socket weld fittings dimensions pdf, Monel 400 socketweld pipe fitting dimensions, monel 400 density, monel 400 machinability, monel 400 microstructure, monel 400 price, monel 400 wire, welding monel 400, monel 400 equivalent, monel 400 casting grade