Delivering High Quality Buttweld Fittings in Elbow, Tee, Reducer, Cap, Stub End etc.

Carbon Steel Threaded Fittings, CS Threaded Fitting, ASTM A105 Carbon Steel Threaded Fitting, ASTM A350 LF2 Carbon Threaded Fitting, Carbon Forged Fitting Manufacturer and Suppliers in India.

Carbon Steel Threaded Fittings Types Carbon Steel Threaded 45 Degree Elbow, Carbon Steel Threaded 90 Degree Elbow, Carbon Steel Threaded Full Coupling Exporter, Carbon Steel Threaded Half Coupling, Carbon Steel Threaded Reducing Coupling, Carbon Steel Threaded Tee, Carbon Steel Threaded Union, Carbon Steel Threaded Cap, Carbon Steel Threaded Reducer Insert, Carbon Steel Threaded Cross, Carbon Steel Threaded Plug, Carbon Steel Threaded Boss, Carbon Steel Threaded Bushing Master Stockist in India.


Carbon Steel Threaded Fitting Definition

Carbon Steel Threaded Fitting probably represent the oldest method of joining piping systems. Like Socket Weld Fittings, Threaded Fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose Nominal Diameter is NPS 2 or smaller.

  • Threaded Fittings is commonly used in low-cost, noncritical applications such as domestic water, fire protection, and industrial cooling water systems.
  • They are available in three pressure ratings: Class 2000, 3000 and 6000.

All Threaded Fittings are NPT, NPT stands for National Pipe Tapered threads, also known as ANSI/ASME B1.20.1 pipe threads. It is a U.S. standard for measuring tapered threads on threaded pipes and fittings. Threaded pipes can give an effective seal for pipes using hydraulic fluids. Sometimes referred to as MPT (male pipe threads), NPT threads are not interchangeable with NPS (National Pipe Straight) threads. Unlike straight threads found on a bolt, a taper thread will pull tight, making a closer seal. A sealant compound or PTFE (Polytetrafluoroethylene) tape must be used to ensure a leak-free seal.

Savoy Piping Inc., was established in 1985 and have 3 decades of Experience in Manufacturing Carbon Threaded Fittings in accordance to ASME B16.11 and MSS-SP-83 with commitment to provide world class Quality to our Customers at Competitive Price by using Innovative Production System and Process.

Savoy Piping Inc., are recognized as the prominent Manufacturer, Exporter and Supplier of a broad assortment of ASTM A105 Threaded Fittings, ASTM A105N Threaded Fittings, ASTM A350 LF2 Threaded Fittings, ASTM A694 F42 Threaded Fittings, ASTM A694 F52 Threaded Fittings, ASTM A694 F56 Threaded Fittings, ASTM A694 F60 Threaded Fittings, ASTM A694 F65 Threaded Fittings etc.

The offered Carbon Steel Threaded Fittings is designed with utmost precision in conformity with the International Quality Standards.

Carbon Steel Threaded Fitting Range

Carbon Steel Threaded Fitting Specification ASTM A182 / ASTM SA182, ASTM A105 / ASME SA105, ASTM A350 / ASME SA350, ASTM A694 / ASME SA694, ASTM B462 / ASME SB462 / ASTM B564 / ASME SB564, ASTM B366 / ASME SB366, ASTM B381 / ASME SB381
Carbon Steel Threaded Fittings Manufacturing Process Forging / Socket / Threaded / Screwed
Carbon Steel Threaded Fittings Other Grades Stainless Steel - F304, F304L, F304H, F310s, F316, F316L, F317L, F321, F347, F904L, F410, F446 etc.
Carbon Steel - 105N, LF2, F42, F46, F52, F56, F60, F65 etc.
Alloy Steel - F5, F9, F11, F22, F91, 4140, Class 1, 2, 3 etc.
Duplex and Super Duplex - F51, F53, F55, UNS N031803, UNS N032750, UNS N032760 etc.
Inconel - 600, 601, 625, 718, UNS N06600, UNS N06601, UNS N06625, UNS N07718 etc.
Incoloy - 800, 800H, 800HT, 825, UNS N08800, UNS N08810, UNS N08811, UNS N08825 etc.
Monel - 400, UNS N04400 etc.
Hastelloy - C276, C22, UNS N010276, UNS N06022 etc.
Titanium - Grade 2, Grade 3, UNS R50400, UNS R56200 etc.
Copper Nickel - 90/10, 70/30, UNS C71500, UNS C70600 etc.
Other - Alloy 20, SMO 254, F44, 6 Moly, UNS N08020, UNS N031254 etc.
Carbon Steel Threaded Fittings Outer Diameter 1/8" NB TO 4" NB (DN6 to DN100)
Carbon Steel Threaded Fittings Pressure Class 2000 LBS, 3000 LBS, 6000 LBS ,9000 LBS or As Per Custom Requirement
Carbon Steel Threaded Fittings Types 45 Degree Elbow, 90 Degree Elbow, Lateral, Tee, Reducer Insert, Full Coupling, Half Coupling, Reducing Coupling, Cap, Union, Cross, Boss, Plug, Bushing etc.
Carbon Steel Threaded Fittings Dimension ASME 16.11 - Socket Welding and Threaded Forged Fittings
MSS SP-79 - Socket Welding Reducer Inserts
MSS SP-83 - Socket Weld Union
MSS SP-95 - Swage(d) Nipples and Bull Plugs
BS 3799 - Specification for Steel Pipe Fittings, Screwed and Socket-welding for the petroleum industry.
ASME B1.20.1 - The American National Pipe Thread Tapered.
Carbon Steel Threaded Fittings Other Testing Tensile, Hardness Test, Chemical Analysis – Spectro Analysis, Positive Material Identification – PMI Testing, Flattening Test, Micro and Macro Test, Pitting Resistance Test, Flaring Test, Intergranular Corrosion (IGC) Test, NACE MR0175, Ultrasound Test, ASTM A262 Practice E, Charpy Impact Test, Grain Size, Dye Penetrant Test etc.
Carbon Steel Threaded Fittings Packaging Carrate / Wooden Pallet / Wooden box-a
Carbon Steel Threaded Fittings Shipment & Transportation By Road - Truck / Train Partial Load, Full Load, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes
Carbon Steel Threaded Fittings Material Test Certificate Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS, Bureau of Indian Standards BIS Approved ETC

Carbon Steel Threaded Fittings Chemical Composition and Mechanical Properties

The chemical composition of Carbon Steel Threaded Fittings is outlined in the following table

Specification C Mn P S Si Cu Ni Cr Mo V
ASTM A105 / ASTM SA105 0.35 max 0.60-1.05 0.035 max 0.040 max 0.10-0.35 0.40 max 0.40 max 0.30 max 0.12 max 0.08 max
Specification & Grade C Mn P S Si Ni Cr Mo Cu Nb V
ASTM A350 LF2 / ASTM SA350 LF2 0.30 max 0.60-1.35 0.035 max 0.040 max 0.15-0.30 0.40 max 0.30 max 0.12 max 0.40 max 0.02 max 0.08 max
Specification Grade Heat or Product C Mn P S Si
ASTM A694 / ASTM SA694 F42, F46, F52, F56, F60, F65 Heat Analysis 0.26 max 1.40 max 0.025 max 0.025 max 0.15-0.35
ASTM A694 / ASTM SA694 F42, F46, F52, F56, F60, F65 Product Analysis 0.265 max 1.44 max 0.030 max 0.030 max 0.10-0.40

The Mechanical Properties of Carbon Steel Threaded Fittings is outlined in the following table

Specification & Grade Tensile Strength
min, psi [MPa]
Yield Strength
min, psi [MPa]
Elongation in 2'.
or 50 mm, min, %:
Rockwell of area,
min, %
Brinell HBW,
max
ASTM A105 / ASME SA105 70 000 [485] 36 000 [485] 30 30 187
ASTM A350 LF2 / ASME SA350 LF2
in Class 1 and Class 2
70 000-95 000
[485-655]
min 36 000 [250] 22 30 ...
ASTM A694 F42 / ASME SA694 F42 min 60 000 [415] min 42 000 [290] 20 ... ...
ASTM A694 F46 / ASME SA694 F46 min 60 000 [415] min 46 000 [315] 20 ... ...
ASTM A694 F52 / ASME SA694 F52 min 66 000 [455] min 52 000 [360] 20 ... ...
ASTM A694 F56 / ASME SA694 F56 min 68 000 [470] min 56 000 [385] 20 ... ...
ASTM A694 F60 / ASME SA694 F60 min 75 000 [515] min 60 000 [415] 20 ... ...
ASTM A694 F65 / ASME SA694 F65 min 77 000 [530] min 65 000 [450] 20 ... ...

Carbon Steel Threaded Fittings is in Ready Stock and Ready to Deliver. High Quality, Lower Costing with Best Service in Threaded Fittings.

Carbon Steel Threaded Fittings Application

  • Oil and Gas Industries
  • Food Processing Industries
  • Equipments
  • Pipeline
  • Power Industries
  • Ship Building Industries
  • Paper Industries
  • Cement Industries
  • Chemical Industries

Carbon Steel Threaded Fittings Available Offer and Discounts

Buy Now Carbon Steel Threaded Fittings at an Attractive Discounted Price, Order Above USD $ 25000 are Eligible of 2% Discount. We Offer Free Insurance and Best Shipping Rates. Our Prices are Always More Competitive and without any compromise in Quality of the Material.

Carbon Steel Threaded Fittings Types

Carbon Steel Threaded Fittings Exported Countries

We Export Carbon Steel Threaded Fittings to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States Of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc

Carbon Steel Threaded Fittings Supplying in States and Cities

We Supply Carbon Steel Threaded Fittings Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Mumbai, Navi Mumbai, Pune, Nashik, Nagpur, Solapur, Kolhapur, Ambernath, Ahmednagar, Latur, Ahmadabad, Surat, Rajkot, Vadodara, Panaji, Madgaon, Chennai, Kolkata, Hyderabad, Bengaluru, Delhi, New Delhi, Ludhiana, Chandigarh, Raipur, Bhopal, Jamshedpur, Vishakhapatnam, Cochin, Ghaziabad, Noida, Gurugram, Bhillai, Durgapur, Vijaywada, Kanpur etc.

Savoy Piping Inc., is a well known worldwide Exporter of Carbon Steel Threaded Fittings, Savoy Piping Inc., is committed to provide each and every customer with the highest standard of customer service. We deals in SS Carbon Steel Threaded Fittings in India and Overseas, offering a wide range of Carbon Steel Threaded Fittings

ss Carbon Steel class 3000 fittings pressure rating, 150# carbon steel Carbon Steel socket weld fittings, b16.11 pressure rating, ansi 3000 pressure rating, class 9000 fittings pressure rating, Carbon Steel ss class 300 fittings pressure rating, Carbon Steel ss class 3000 pipe fittings pressure rating, asme b16.11 class 3000, class 6000 fittings, ss Carbon Steel pipe coupling dimensions, steel pipe fitting dimensions chart, carbon steel Carbon Steel socket weld fittings, ss Carbon Steel forged fittings price list, ss Carbon Steel forged fittings price, asme b16.11 fittings, Carbon Steel socket weld fittings dimensions pdf, Carbon Steel socketweld pipe fitting dimensions, ss Carbon Steel socket weld pipe fittings dimensions, Carbon Steel ss forged fittings definition, 3000 lb carbon steel Carbon Steel forged fittings, forged fittings definition, forged steel Carbon Steel fittings, ss Carbon Steel forging process, hot forging process, drop forging process