Stainless Steel Threaded Fittings, SS Threaded Fitting, ASTM A182/SA182 Stainless Steel Threaded Fitting, Stainless Threaded Fitting, SS Forged Fitting Manufacturer and Suppliers in India.
Stainless Steel Threaded Fittings Types Stainless Steel Threaded 45 Degree Elbow, Stainless Steel Threaded 90 Degree Elbow, Stainless Steel Threaded Full Coupling Exporter, Stainless Steel Threaded Half Coupling, Stainless Steel Threaded Reducing Coupling, Stainless Steel Threaded Tee, Stainless Steel Threaded Union, Stainless Steel Threaded Cap, Stainless Steel Threaded Reducer Insert, Stainless Steel Threaded Cross, Stainless Steel Threaded Plug, Stainless Steel Threaded Boss, Stainless Steel Threaded Bushing Master Stockist in India.
Stainless Steel Threaded Fittings / SS Screwed Fittings - Content
- What is Stainless Steel Threaded Fitting
- Stainless Steel Threaded Fitting Available Range
- Stainless Steel Threaded Fitting Chemical Composition and Mechanical Properties
- Stainless Steel Threaded Fitting Application and Usage
- Stainless Steel Threaded Fitting Available Offer and Discount Best Price
- Stainless Steel Threaded Fitting Types
- Stainless Steel Threaded Fitting Export Countries
- Stainless Steel Threaded Fitting Supplying States and Cities
Stainless Steel Threaded Fitting Definition
Stainless Steel Threaded Fitting probably represent the oldest method of joining piping systems. Like Socket Weld Fittings, Threaded Fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose Nominal Diameter is NPS 2 or smaller.
The dimensional standards for taper pipe threads are given in ASME B1.20.1. That document gives all required dimensions including number of threads per inch, pitch diameter, and normal engagement lengths for all pipe diameters.
- Threaded Fittings is commonly used in low-cost, noncritical applications such as domestic water, fire protection, and industrial cooling water systems.
- They are available in three pressure ratings: Class 2000, 3000 and 6000.
All Threaded Fittings are NPT, NPT stands for National Pipe Tapered threads, also known as ANSI/ASME B1.20.1 pipe threads. It is a U.S. standard for measuring tapered threads on threaded pipes and fittings. Threaded pipes can give an effective seal for pipes using hydraulic fluids. Sometimes referred to as MPT (male pipe threads), NPT threads are not interchangeable with NPS (National Pipe Straight) threads. Unlike straight threads found on a bolt, a taper thread will pull tight, making a closer seal. A sealant compound or PTFE (Polytetrafluoroethylene) tape must be used to ensure a leak-free seal.
Savoy Piping Inc., was established in 1985 and have 3 decades of Experience in Manufacturing SS Threaded Weld Fittings in accordance to ASME B16.11 and MSS-SP-83 with commitment to provide world class Quality to our Customers at Competitive Price by using Innovative Production System and Process.
Savoy Piping Inc., are recognized as the prominent Manufacturer, Exporter and Supplier of a broad assortment of 304 Stainless Steel Threaded Fittings, 304L Stainless Steel Threaded Fittings, 304H Stainless Steel Threaded Fittings, 310s Stainless Steel Threaded Fittings, 316 Stainless Steel Threaded Fittings, 316L Stainless Steel Threaded Fittings, 317L Stainless Steel Threaded Fitting, 321 Stainless Steel Threaded Fittings, 347 Stainless Steel Threaded Fittings, 904L Stainless Steel Threaded Fittings, SMO 254 Stainless Steel Threaded Fittings, 410 Stainless Steel Threaded Fittings, 446 Stainless Steel Threaded Fittings etc.
The offered Stainless Steel Threaded Fittings is designed with utmost precision in conformity with the International Quality Standards.
Stainless Steel Threaded Fitting Range
| Stainless Steel Threaded Fitting Specification | ASTM A182 / ASTM SA182, ASTM A105 / ASME SA105, ASTM A350 / ASME SA350, ASTM A694 / ASME SA694, ASTM B462 / ASME SB462 / ASTM B564 / ASME SB564, ASTM B366 / ASME SB366, ASTM B381 / ASME SB381 |
| Stainless Steel Threaded Fittings Manufacturing Process | Forging / Socket / Threaded / Screwed |
| Stainless Steel Threaded Fittings Other Grades | Stainless Steel - F304, F304L, F304H, F310s, F316, F316L, F317L, F321, F347, F904L, F410, F446 etc. Carbon Steel - 105N, LF2, F42, F46, F52, F56, F60, F65 etc. Alloy Steel - F5, F9, F11, F22, F91, 4140, Class 1, 2, 3 etc. Duplex and Super Duplex - F51, F53, F55, UNS N031803, UNS N032750, UNS N032760 etc. Inconel - 600, 601, 625, 718, UNS N06600, UNS N06601, UNS N06625, UNS N07718 etc. Incoloy - 800, 800H, 800HT, 825, UNS N08800, UNS N08810, UNS N08811, UNS N08825 etc. Monel - 400, UNS N04400 etc. Hastelloy - C276, C22, UNS N010276, UNS N06022 etc. Titanium - Grade 2, Grade 3, UNS R50400, UNS R56200 etc. Copper Nickel - 90/10, 70/30, UNS C71500, UNS C70600 etc. Other - Alloy 20, SMO 254, F44, 6 Moly, UNS N08020, UNS N031254 etc. |
| Stainless Steel Threaded Fittings Outer Diameter | 1/8" NB TO 4" NB (DN6 to DN100) |
| Stainless Steel Threaded Fittings Pressure Class | 2000 LBS, 3000 LBS, 6000 LBS ,9000 LBS or As Per Custom Requirement |
| Stainless Steel Threaded Fittings Types | 45 Degree Elbow, 90 Degree Elbow, Lateral, Tee, Reducer Insert, Full Coupling, Half Coupling, Reducing Coupling, Cap, Union, Cross, Boss, Plug, Bushing etc. |
| Stainless Steel Threaded Fittings Dimension | ASME 16.11 - Socket Welding and Threaded Forged Fittings MSS SP-79 - Socket Welding Reducer Inserts MSS SP-83 - Socket Weld Union MSS SP-95 - Swage(d) Nipples and Bull Plugs BS 3799 - Specification for Steel Pipe Fittings, Screwed and Socket-welding for the petroleum industry. ASME B1.20.1 - The American National Pipe Thread Tapered. |
| Stainless Steel Threaded Fittings Other Testing | Tensile, Hardness Test, Chemical Analysis – Spectro Analysis, Positive Material Identification – PMI Testing, Flattening Test, Micro and Macro Test, Pitting Resistance Test, Flaring Test, Intergranular Corrosion (IGC) Test, NACE MR0175, Ultrasound Test, ASTM A262 Practice E, Charpy Impact Test, Grain Size, Dye Penetrant Test etc. |
| Stainless Steel Threaded Fittings Packaging | Carrate / Wooden Pallet / Wooden box-a |
| Stainless Steel Threaded Fittings Shipment & Transportation | By Road - Truck / Train Partial Load, Full Load, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes |
| Stainless Steel Threaded Fittings Material Test Certificate | Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS, Bureau of Indian Standards BIS Approved ETC |
Stainless Steel Threaded Fittings Chemical Composition and Mechanical Properties
The chemical composition of Stainless Steel Threaded Fittings is outlined in the following table
| UNS N0 | SAE No | AISI No / Common Name | C | Si | Mn | P | S | Cr | Mo | Ni | Others |
| S30400 | 30304 | 304 | 0.07 | 0.75 | 2.00 | 0.045 | 0.030 | 17.5/19.5 | - | 8.0/10.5 | N 0.10 |
|
S30400 |
30304 | 304 | 0.08 | 1.00 | 2.00 | 0.045 | 0.030 | 18.0/20.0 | 8.0/11.0 | ||
| S30403 | 30304L | 304L | 0.030 | 0.75 | 2.00 | 0.045 | 0.030 | 17.5/19.5 | - | 8.0/12.0 | N 0.10 |
| S30403 |
30304L | 304L | 0.030 | 1.00 | 2.00 | 0.045 | 0.030 | 18.0/20.0 | 8.0/12.0 | ||
| S30453 | - | 304LN | 0.030 | 0.75 | 2.00 | 0.045 | 0.030 | 18.0/20.0 | - | 8.0/12.0 | N 0.10/0.16 |
| S30454 | - | - | 0.03 | 1.00 | 2.00 | 0.045 | 0.030 | 18.0/20.0 | - | 8.0/11.0 | N 0.16/0.30 |
| S30500 | 30305 | 305 | 0.12 | 0.75 | 2.00 | 0.045 | 0.030 | 17.0/19.0 | - | 10.5/13.0 | - |
| S31600 | 30316 | 316 | 0.08 | 0.75 | 2.00 | 0.045 | 0.030 | 16.0/18.0 | 2.00/3.00 | 10.0/14.0 | N 0.10 |
| S31603 | 30316L | 316L | 0.030 | 0.75 | 2.00 | 0.045 | 0.030 | 16.0/18.0 | 2.00/3.00 | 10.0/14.0 | N 0.10 |
| S31635 | - | 316Ti | 0.08 | 0.75 | 2.00 | 0.045 | 0.030 | 16.0/18.0 | 2.00/3.00 | 10.0/14.0 |
Ti 5x (C+N) / 0.70 N 0.10 |
| S31653 | - | 316LN | 0.030 | 0.75 | 2.00 | 0.045 | 0.030 | 16.0/18.0 | 2.00/3.00 | 10.0/14.0 | N 0.10/0.16 |
| S31700 | 30317 | 317 | 0.08 | 0.75 | 2.00 | 0.045 | 0.030 | 18.0/20.0 | 3.0/4.0 | 11.0/15.0 | N 0.10 |
| S31703 | - | 317L | 0.030 | 0.75 | 2.00 | 0.045 | 0.030 | 18.0/20.0 | 3.00/4.00 | 11.0/15.0 | N 0.10 |
| S32100 | 30321 | 321 | 0.08 | 0.75 | 2.00 | 0.045 | 0.030 | 17.0/19.0 | - | 9.0/12.0 |
Ti 5 x C min/0.70 N 0.10 |
| S34700 | 30347 | 347 | 0.08 | 0.75 | 2.00 | 0.045 | 0.030 | 17.0/19.0 | - | 9.0/13.0 | Nb+Ta 10 x C min/1.0 |
| S34720 | - | 347F | 0.08 | 1.00 | 2.00 | 0.040 | 0.18/0.35 | 17.00/19.00 | 0.75 | 9.00/12.00 | Nb 10xC / 1.10; Cu 0.75; Ta 0.05 |
The Mechanical Properties of Stainless Steel Threaded Fittings is outlined in the following table
| S.S. | 200 | 202 | 301 | 302 | 303 | 304 | 304L | 309 | 309s | 310 | 310s | 314 | 316 | 316L | 317 | 321 | 347 |
| Tensile Strength |
105 | 105 | 110 | 90 | 90 | 85 | 60 | 90 | 90 | 95 | 95 | 100 | 85 | 78 | 90 | 87 | 92 |
| Yield Strength |
55 | 55 | 40 | 37 | 35 | 35 | 30 | 40 | 40 | 40 | 40 | 50 | 35 | 30 | 40 | 35 | 35 |
| Elongation in 2' |
55 | 55 | 60 | 55 | 50 | 55 | 55 | 45 | 45 | 45 | 45 | 45 | 55 | 55 | 50 | 55 | 50 |
| Rockwell | 90 | 90 | 85 | 82 | 84 | 80 | 76 | 85 | 85 | 87 | 87 | 87 | 80 | 76 | 85 | 80 | 84 |
| Brinell | 185 | 185 | 165 | 155 | 160 | 150 | 140 | 165 | 165 | 170 | 170 | 170 | 150 | 145 | 160 | 150 | 160 |
| En58M | En58E | En58J&H | En58C | ||||||||||||||
| X12 CrNi17.7 |
X2 CrNi18.8 |
X5 CrNi18.9 |
X5 CrNi18.8 |
x5 CrNiMo18.12 |
X2 CrNiMo19.1 |
X10 CrNiMo18.9 |
Stainless Steel Threaded Fittings is in Ready Stock and Ready to Deliver. High Quality, Lower Costing with Best Service in Threaded Fittings.
Stainless Steel Threaded Fittings Application
- Oil and Gas Industries
- Food Processing Industries
- Equipments
- Pipeline
- Power Industries
- Ship Building Industries
- Paper Industries
- Cement Industries
- Chemical Industries
Stainless Steel Threaded Fittings Available Offer and Discounts
Buy Now Stainless Steel Threaded Fittings at an Attractive Discounted Price, Order Above USD $ 25000 are Eligible of 2% Discount. We Offer Free Insurance and Best Shipping Rates. Our Prices are Always More Competitive and without any compromise in Quality of the Material.
Stainless Steel Threaded Fittings Types
Stainless Steel Threaded Fittings Exported Countries
We Export Stainless Steel Threaded Fittings to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States Of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc
Stainless Steel Threaded Fittings Supplying in States and Cities
We Supply Stainless Steel Threaded Fittings Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Mumbai, Navi Mumbai, Pune, Nashik, Nagpur, Solapur, Kolhapur, Ambernath, Ahmednagar, Latur, Ahmadabad, Surat, Rajkot, Vadodara, Panaji, Madgaon, Chennai, Kolkata, Hyderabad, Bengaluru, Delhi, New Delhi, Ludhiana, Chandigarh, Raipur, Bhopal, Jamshedpur, Vishakhapatnam, Cochin, Ghaziabad, Noida, Gurugram, Bhillai, Durgapur, Vijaywada, Kanpur etc.
Savoy Piping Inc., is a well known worldwide Exporter of Stainless Steel Threaded Fittings, Savoy Piping Inc., is committed to provide each and every customer with the highest standard of customer service. We deals in SS Stainless Steel Threaded Fittings in India and Overseas, offering a wide range of Stainless Steel Threaded Fittings
ss Stainless Steel class 3000 fittings pressure rating, 150# stainless steel Stainless Steel socket weld fittings, b16.11 pressure rating, ansi 3000 pressure rating, class 9000 fittings pressure rating, Stainless Steel ss class 300 fittings pressure rating, Stainless Steel ss class 3000 pipe fittings pressure rating, asme b16.11 class 3000, class 6000 fittings, ss Stainless Steel pipe coupling dimensions, steel pipe fitting dimensions chart, stainless steel Stainless Steel socket weld fittings, ss Stainless Steel forged fittings price list, ss Stainless Steel forged fittings price, asme b16.11 fittings, Stainless Steel socket weld fittings dimensions pdf, Stainless Steel socketweld pipe fitting dimensions, ss Stainless Steel socket weld pipe fittings dimensions, Stainless Steel ss forged fittings definition, 3000 lb stainless steel Stainless Steel forged fittings, forged fittings definition, forged steel Stainless Steel fittings, ss Stainless Steel forging process, hot forging process, drop forging process