EN 1092-1 Alloy Steel Flanges, EN 1092-1 Alloy Steel Threaded Flanges Manufacturer in India.
Savoy Piping Inc., is an ISO 9001:2015, RINA, PED/27/EC and OHSAS 18001:2007 Approved Manufacturer of EN 1092-1 Alloy Steel Flanges in Pressur Class PN 2.5, PN 6, PN 10, PN 16, PN 25, PN 40, PN 63, PN 100, with Facing Types like Type A Flat Face, Type B Raised Face, Type C Tongue, Type D Groove, Type E Spigot, Type F Recess, Type G O-ring Spigot, Type H O-ring Groove.
EN 1092-1 Alloy Steel Spade Flange, EN 1092-1 ANSI B16.5 Chrome Moly Ring Type Joint Flanges, EN 1092-1 Alloy Steel Industrial Flanges Stockholder, EN 1092-1 ASTM A182 Chrome Moly Threaded Flanges, EN 1092-1 Alloy Steel Socket Weld Flanges, EN 1092-1 Alloy Steel RTJ Flange, EN 1092-1 Alloy Steel Weld Neck Flange Dealer in India, EN 1092-1 Alloy Steel Forged Flanges Manufacturer.
Here's a brief introduction to some key aspects of EN 1092-1 Alloy Steel Flanges:
EN 1092-1 flanges are commonly used in the oil and gas industry and mining. Made of steel, aluminum, copper alloy and iron. The type of material and flange dimensions will vary depending on the type of application in which it will be used. Nominal width ranges from DN 10 to DN 4000.
The EN 1092-1 Alloy Steel Flanges, refer to a specific type of Threaded Flange as defined in the EN 1092-1 standard. Threaded flanges are designed with internal threads that allow them to be screwed onto the external threads of pipes or fittings. These flanges provide a secure and leak-tight connection without the need for welding.EN 1092-1 Alloy Steel Threaded Flanges conform to the dimensions, materials, and pressure ratings specified in the EN 1092-1 standard. They are available in various sizes and pressure classes to suit different piping system requirements.
Threaded flanges are commonly used in applications where the convenience of assembly and disassembly is essential, such as in smaller pipe sizes or systems that may require frequent maintenance or adjustments. They are suitable for low to medium pressure and temperature conditions.
When using EN 1092-1 Alloy Steel Flanges, it is important to ensure proper alignment of the threads and use suitable sealing materials, such as gaskets or thread sealants, to ensure a tight and reliable connection. Threaded flanges find applications in a wide range of industries, including plumbing, chemical processing, water distribution, and HVAC systems, among others. They offer flexibility, ease of installation, and the ability to connect and disconnect components without the need for specialized welding equipment.
EN 1092-1 is a European standard that specifies requirements for circular steel flanges used in various industrial applications. These flanges are designed to connect pipes, valves, and other equipment in piping systems. The standard defines the dimensions, materials, and technical specifications for flanges, ensuring compatibility and interchangeability within the European market.
Alloy steel flanges, as per EN 1092-1, are a specific category of flanges made from alloy steel materials. Alloy steel is a type of steel that contains additional alloying elements, such as chromium, nickel, molybdenum, or vanadium, to enhance its mechanical properties, corrosion resistance, and other characteristics. These alloying elements contribute to improved strength, toughness, and high-temperature resistance, making alloy steel flanges suitable for applications in demanding environments.
EN 1090-1 Flanges European Standard Specification
(Flanges and ther joints - Crcular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel Flanges) EN 1092-1 Flanges European Standard for a single series of flanges specïfies requirements for circular steel flanges in PN designations PN 2.5 to PN 100 and nominal sizes from DN 10 to DN 4000.
EN 1092-1 Flanges Standard specifies the Flange Types and their Facings, Dimensions, Tolerances, Threading, Bolt Sizes, Flange Jointing Face Surface Finish, Marking, Materials, Pressure / Temperature Ratings and Approximate Flange Masses.
Savoy Piping Inc. are recognized as the prominent Manufacturer, Exporter and Supplier of a broad assortment of EN 1092-1 Flanges in EN 1092-01 Type 01, EN 1092-01 Type 05, EN 1092-01 Type 11,EN 1092-01 Type 12, EN 1092-01 Type 13 etc.
Material of Composition EN 1092-01 Carbon Steel Flange, EN 1092-01 Alloy Steel Flanges, EN 1092-1 Stainless Steel Flanges, EN 1092-01 Duplex Steel Flanges, EN 1092-01 Super Duplex Steel Flanges, with Pressure / Temperature Ratings of PN6, PN10, PN16, PN25, PN40, PN63, PN100. Popular Type of EN 1092-01 Flanges in Compare to ASTM / ASME / DIN Standards are EN 1091-1 Weld-neck Flanges, EN 1091-1 Plate Flanges, EN 1091-1 Blind Flange, EN 1091-1 Hubbed Slip-on Flanges, EN 1091-1 Hubbed Threaded Flanges, EN 1091-1 Long Weld Neck Flanges etc. The offered EN 1092-1 Flanges is Designed with Utmost Precision in Conformity with the International European Quality Standards.Additionally, it aligns with other international flange standards like ANSI, ASME, and DIN, ensuring global compatibility
Designation and Classification:
- EN 1092-1 provides a system for the designation and classification of flanges based on their nominal pressure ratings, dimensions, and material specifications.
Material Requirements:
- The standard specifies the allowable materials for alloy steel flanges, including various grades and types of alloy steels. These materials are chosen for their suitability in high-pressure and high-temperature applications.
Dimensions and Tolerances:
- EN 1092-1 establishes the dimensions and tolerances for alloy steel flanges, ensuring uniformity and compatibility across different manufacturers. This includes details such as outer diameter, bolt circle diameter, thickness, and facing type.
Facing Types:
- Flange facing refers to the surface finish of the flange that comes in contact with the gasket. EN 1092-1 defines facing types, such as flat face (FF), raised face (RF), and ring-type joint (RTJ), among others.
Pressure Ratings:
- The standard classifies flanges based on nominal pressure ratings, ranging from PN 2.5 to PN 400. This indicates the maximum pressure that the flange can withstand at specific temperatures.
Marking and Certification:
- EN 1092-1 specifies requirements for marking flanges to provide information about their compliance with the standard. This may include details such as the manufacturer's name, material grade, pressure rating, and more.
Testing and Inspection:
- The standard outlines procedures for testing and inspecting alloy steel flanges to ensure their quality, integrity, and performance. This may include non-destructive testing methods and visual inspections.
EN 1092-1 Alloy Steel Flanges and DIN Flanges play a crucial role in maintaining the integrity and reliability of piping systems in various industries, including oil and gas, chemical processing, power generation, and more. Adhering to this standard helps ensure the compatibility and safety of these critical components.
EN 1092-1 Alloy Steel Flanges Manufacturing Range
| EN 1092-1 Alloy Steel Flanges Specification & Standard | DIN EN 1092-01 European Standard |
| EN 1092-1 Alloy Steel Flanges Manufacturing Process | Hot Forging / Steel Casting / Hot Rolled / Plate Machining |
| EN 1092-1 Alloy Steel Flanges Outer Diameter | DN 15 to DN 4000 |
| EN 1092-1 Alloy Steel Flanges Pressure Class | PN 2.5, PN 6, PN 8, PN10, PN 16, PN 25, PN 40, PN 63, 100 etc |
| EN 1092-1 Alloy Steel Flanges Facing | Type Flat Face (FF), Type B Raised Face (RF), Type C Tongue, Type D Groove, Type E Spigot, Type F Recess, Type G O-ring Spigot, Type H O-ring Groove, |
| EN 1092-1 Alloy Steel Flanges Types | Type 01 Plate Flange for welding, Type 02 Loose Plate Flange and Loose Flanges with Weld-on Plate Collar or for Lapped Pipe End, Type 04 Loose Plate Flange with weld-neck collar, Type 05 Blind Flange, Type 11 Weld-neck Flange, Type 12 Hubbed Slip-on Flange for welding, Type 13 Hubbed Threaded Flange, Type 34 Weld-neck collar Flange, Type 35 Weldring neck Flange, Type 36 Pressed collar with long neck Flange, Type 37 Pressed collar Flange,WNRF Flange, SORF Flange, BLRF Flange, Orifice Flanges , Custom Flange as per Drawing etc. |
| EN 1092-1 Alloy Steel Flanges Specication, Grades, Symbol, Material Number | EN Series - EN 10028-2, EN 10028-3, EN 10028-4, EN 10028-7, EN 10222-2, EN 10222-3, EN 10222-4, EN 10222-5, EN 10272, EN 10273 Material Name - 10CrMo9-10, 11MnNi5-3, 12CrMo9-10, 12Ni14, 13CrMo4-5, 13MnNi6-3, 15NiMn6, 16Mo3, G17CrMo5-5, G17CrMo9-10, G17Mn5, G20Mn5, G20Mo5, G9Ni10, G9Ni14, GP240GH, GP280GH, GX15CrMo5, GX23CrMoV12-1, GX2CrNi19-11, GX2CrNiMo19-11- 2, GX2CrNiMoCuN25-6-3-3, GX2CrNiMoN22-5- 3, GX2CrNiMoN26-7- 4, GX2NiCrMo28-20- 2, GX5CrNi19-10, GX5CrNiMo19-11- 2, GX5CrNiMoNb19- 11-2, GX5CrNiNb19-11, P235GH, P245GH, P250GH, P265GH, P275NH, P275NL1, P275NL2, P280GH, P285NH, P285QH, P295GH, P355N, P355NH, P355NL1, P355NL2, P355QH, P355QH1, X10CrMoVNb 9-1, X10CrMoVNb9-1, X12 Ni 5, X12Ni5, X16CrMo5-1+NT, X1CrNi25-21, X1CrNiMoCuN20- 18-7, X1CrNiMoCuN20-18-7, X1NiCrMoCu25- 20-5, X1NiCrMoCu31- 27-4, X1NiCrMoCuN25- 20-7, X1NiCrMoCuN25-20-7, X20CrMoV11- 1, X2CrNi18-9, X2CrNi19-11, X2CrNiMo17- 12-2, X2CrNiMo17- 12-3, X2CrNiMo17-12- 2, X2CrNiMo18- 14-3, X2CrNiMo18-14- 3, X2CrNiMoN1 7-11-2, X2CrNiMoN1 7-13-3, X2CrNiMoN17- 11-2, X2CrNiMoN17- 13-3, X2CrNiMoN17- 13-5, X2CrNiMoN2 2-5-3, X2CrNiMoN2 5-7-4, X2CrNiMoN22- 5-3, X2CrNiMoN22-5- 3, X2CrNiMoN25- 7-4, X2CrNiMoN25-7- 4, X2CrNiN18- 10, X2CrNiN18-10, X2CrNiN23-4, X3CrNiMo17- 13-3, X3CrNiMo17-13- 3, X5CrNi18-10, X5CrNiMo17- 12-2, X5CrNiMo17-12- 2, X6CrNi18-10, X6CrNiMoNb17- 12-2, X6CrNiMoTi1 7-12-2, X6CrNiNb18- 10, X6CrNiNb18-10, X6CrNiTi18- 10, X6CrNiTi18-10, X6CrNiTiB18- 10, X6CrNiTiB18-10, X8Ni9 Material Number - 1.0345, 1.0352, 1.0425, 1.0426, 1.0460, 1.0477, 1.0478, 1.0481, 1.0487, 1.0488, 1.0562, 1.0565, 1.0566, 1.0571, 1.0619, 1.0625, 1.1104, 1.1106, 1.1131, 1.4301, 1.4306, 1.4307, 1.4308, 1.4309, 1.4311, 1.4335, 1.4362,1.4401, 1.4404, 1.4406, 1.4409, 1.4410, 1.4429, 1.4432, 1.4435, 1.4436, 1.4439, 1.4458, 1.4462, 1.4529, 1.4539, 1.4541, 1.4547, 1.4550, 1.4552, 1.4563, 1.4571, 1.4580, 1.4903, 1.4922, 1.4931, 1.4941, 1.4948, 1.5415, 1.5419, 1.5636, 1.5637, 1.5638, 1.5662, 1.5680, 1.6212, 1.6217, 1.6220, 1.6228, 1.7335, 1.7357, 1.7365, 1.7366, 1.7375, 1.7379, 1.7380, 1.7383, 1.8867 |
| EN 1092-1 Carbon Steel Flanges Flanges Dimension | EN 1092-1, ASME B16.5, ASME B16.47 SERIES A, ASME B16.47 SERIES B, ASME B16.36, BS10, EN1092-1:2013, MSS SP44, ASA, API-605, ISO 7005, ISO 15590-3, DIN 2631--2638, DIN 2573-2576, DIN 2527, DIN 2641-2642, DIN 2565-2566, DIN2502, AWWA, AS2129 TABLE C, D, E, F, J etc.. |
| EN 1092-1 Alloy Steel Flanges Other Testing | NACE MR0175, Ultrasounic Test, Charpy Impact Test, Macro, Post-weld Heat Treatment (PWHT), Grain Size, Hardness, HIC, SSC, Sour Service, A for annealed, N for normalized, NT for Normalized and Tempered, or QT for Quenched and Tempered, Carbon Equivalent, Dye Penetrant Test etc. |
| EN 1092-1 Alloy Steel Flanges Value Added Services | Rolling, Drill, Punch, CNC Machining, Sand Blasting, Shot Blasting, Heat Treatment, Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized |
| EN 1092-1 Alloy Steel Flanges Packaging | Loose / Carrate / Wooden Pallet / Wooden Box / Plastic Cloth Wraps |
| EN 1092-1 Alloy Steel Flanges Shipment & Transportation | By Road - Truck / Train Partial Load, Full Load, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes |
| EN 1092-1 Alloy Steel Flanges Material Test Certificate | Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / RINA Approved / PED Approved / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS, Bureau of Indian Standards BIS Approved etc. |
EN 1092-1 Alloy Steel Flanges Chemical Compostion and Properties
The chemical composition of grade EN 1092-1 Alloy Steel Flanges is outlined in the following table
| Grade | C | Mn | Si | P | S | Cr | Mo |
|---|---|---|---|---|---|---|---|
| F1 | 0.15 max | 0.3-0.6 | 0.5 | 0.03 | 0.03 | 4-6 | 0.44-0.65 |
| F5 | 0.15 max | 0.3-0.6 | 0.5-1.0 | 0.03 | 0.03 | 4-6 | 0.44-0.65 |
| F9 | 0.15 max | 0.3-0.6 | 0.5-1.0 | 0.03 | 0.03 | 8-10 | 0.9-1.1 |
| F11 | 0.5-0.15 | 0.3-0.6 | 0.5-1.0 | 0.03 | 0.03 | 1.0-1.5 | 0.44-0.65 |
| F12 | 0.15 max | 0.3-0.6 | 0.5 | 0.03 | 0.03 | 4-6 | 0.44-0.65 |
| F22 | 0.50.15 max | 0.3-0.6 | 0.5 | 0.03 | 0.03 | 4-6 | 0.44-0.65 |
| F91 | 0.15 max | 0.3-0.6 | 0.5-1.0 | 0.03 | 0.03 | 8-10 | 0.9-1.1 |
EN 1092-1 Alloy Steel Flanges Mechanical and Physical Properties
The mechanical properties of grade EN 1092-1 Alloy Steel Flanges are displayed in the following table.
| Grade | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|
| F1 | 275 | 485 | 20 % |
| F5 | 275 | 485 | 20 % |
| F9 | 380 | 585 | 20 % |
| F11 | 205 | 415 | 20 % |
| F12 | 275 | 485 | 20 % |
| F22 | 205 | 415 | 20 % |
| F91 | 380 | 585 | 20 % |
EN 1092-1 Alloy Steel Flanges Facing Types
 EN 1092-1 Type 34 C Tongue |
 EN 1092-1 Type 34 C Tongue |
 EN 1092-1 Type 34 C Tongue |
 EN 1092-1 Type F Recess |
 EN 1092-1 Type F Recess |
 EN 1092-1 Type F Recess |
 EN 1092-1 Type G O Ring Groove |
 EN 1092-1 Type H O Ring Spigot |
NOTE 1 The transition from the edge of the raised face to the flange face can be by radius or chamfer for types B, D, F and G only (see 5.7.1). | |||
Pressure Rating of EN 1092-1 Alloy Steel Flanges
|
|
Download Dimension Chart and Weight of EN 1092-1 Alloy Steel Flanges
-
EN 1092-1 PN 2.5 Flanges Dimension & Weight
EN 1092-1 PN 06 Flanges Dimension & Weight
EN 1092-1 PN 10 Flanges Dimension & Weight
EN 1092-1 PN 16 Flanges Dimension & Weight
EN 1092-1 PN 25 Flanges Dimension & Weight
EN 1092-1 PN 40 Flanges Dimension & Weight
EN 1092-1 PN 63 Flanges Dimension & Weight
EN 1092-1 PN 100 Flanges Dimension & Weight
EN 1092-1 PN 160 Flanges Dimension & Weight
EN 1092-1 PN 250 Flanges Dimension & Weight
EN 1092-1 PN 320 Flanges Dimension & Weight
EN 1092-1 PN 400 Flanges Dimension & Weight
EN 1092-1 Alloy Steel Flanges related to DIN Standard
| Correlation of the flange sizes & types covered by the older DIN Standards with those included in DIN EN 1092-1 | ||||
|---|---|---|---|---|
| DIN Standard | Flange type as in DIN EN 1092-1 | Item description | Size range (DN) as in DIN Standard | Size range (DN) as in DIN EN 1092-1 |
| *2512 | – | Tongue and groove | Up to PN 160 DN 4 to DN 1000 | Up to PN 100 DN 10 to DN 2000 |
| *2513 | – | Spigot and recess | DN 10 to DN 1000 | Up to PN 100 DN 10 to DN 2000 |
| *2514 | – | Spigot with groove and recess | DN 10 to DN 3000 | Up to PN 100 DN 10 to DN 2000 |
| 2527 | 05 | Blank flanges, PN 2,5 | Not specified. | DN 10 to DN 2000 |
| 05 | Blank flanges, PN 6 | DN 10 to DN 500 | DN 10 to DN 2000 | |
| 05 | Blank flanges, PN 10 | DN 10 to DN 500 | DN 10 to DN 1200 | |
| 05 | Blank flanges, PN 16 | DN 10 to DN 500 | DN 10 to DN 1200 | |
| 05 | Blank flanges, PN 25 | DN 10 to DN 500 | DN 10 to DN 600 | |
| 05 | Blank flanges, PN 40 | DN 10 to DN 500 | DN 10 to DN 600 | |
| 05 | Blank flanges, PN 64 (now PN 63) | DN 10 to DN 400 | DN 10 to DN 400 | |
| 05 | Blank flanges, PN 100 | DN 10 to DN 350 | DN 10 to DN 350 | |
| 2543 | – | Cast steel flanges, PN 16 | DN 10 to DN 2200 | DN 10 to DN 2000 |
| 2544 | – | Cast steel flanges, PN 25 | DN 10 to DN 2000 | DN 10 to DN 2000 |
| 2545 | – | Cast steel flanges, PN 40 | DN 10 to DN 1600 | DN 10 to DN 600 |
| 2546 | – | Cast steel flanges, PN 64 (now PN 63) | DN 10 to DN 1200 | DN 10 to DN 1200 |
| 2547 | – | Cast steel flanges, PN 100 | DN 125 to DN 700 | DN 10 to DN 500 |
| 2566 | 13 | Hubbed threaded flanges, PN 10 to PN 16 | DN 6 to DN 100 | DN 10 to DN 600 |
| 2573 | 01 | Plate flanges for brazing or welding, PN 6 | DN 10 to DN 500 | DN 10 to DN 600 |
| 2576 | 01 | Plate flanges for brazing or welding, PN 10 | DN 10 to DN 500 | DN 10 to DN 600 |
| 2630 | 11 | Weld-neck flanges, PN 1 and PN 2,5 | DN 10 to DN 4000 | DN 10 to DN 4000 |
| 2631 | 11 | Weld-neck flanges, PN 6 | DN 10 to DN 3600 | DN 10 to DN 3600 |
| 2632 | 11 | Weld-neck flanges, PN 10 | DN 10 to DN 3000 | DN 10 to DN 3000 |
| 2633 | 11 | Weld-neck flanges, PN 16 | DN 10 to DN 2000 | DN 10 to DN 2000 |
| 2634 | 11 | Weld-neck flanges, PN 25 | DN 10 to DN 1000 | DN 10 to DN 1000 |
| 2635 | 11 | Weld-neck flanges, PN 40 | DN 10 to DN 500 | DN 10 to DN 600 |
| 2636 | 11 | Weld-neck flanges, PN 64 (now PN 63) | DN 10 to DN 400 | DN 10 to DN 400 |
| 2637 | 11 | Weld-neck flanges, PN 100 | DN 10 to DN 350 | DN 10 to DN 350 |
| 2641 | 02, 33, 32 | Loose plate flanges, lapped pipe ends, weld-on plate collars, PN 6 | DN 10 to DN 1200 | DN 10 to DN 600 |
| 2642 | 02, 33, 32 | Loose plate flanges, lapped pipe ends, weld-on plate collars, PN 10 | DN 10 to DN 800 | DN 10 to DN 600 |
| 2655 | 02, 33, 32 | Loose plate flanges, weld-on plate collars, PN 25 | DN 10 to DN 500 | DN 10 to DN 600 |
| 2656 | 02, 33, 32 | Loose plate flanges, weld-on plate collars, PN 40 | DN 10 to DN 400 | DN 10 to DN 600 |
| 2673 | 04, 34 | Loose plate flanges with weld-neck collar, PN 10 | DN 10 to DN 1200 | DN 10 to DN 600 |
| *Flange feature only; not the call out for a complete flange | ||||
| DIN Plate Flanges (Slip On Flange) | DIN Weld Neck Flanges | DIN Blind Flanges | DIN Threaded Flanges |
| DIN 2573 PN6 Flanges DIN 2576 PN10 Flanges DIN 2502 PN16 Flanges DIN 2503 PN25 Flanges DIN 2543 PN16 Flanges |
DIN 2631 PN6 Flanges DIN 2632 PN10 Flanges DIN 2633 PN16 Flanges DIN 2634 PN25 Flanges DIN 2635 PN40 Flanges |
DIN 2527 PN6 Flanges DIN 2527 PN10 Flanges DIN 2527 PN16 Flanges DIN 2527 PN25 Flanges DIN 2527 PN40 Flanges |
DIN 2565 PN6 Flanges DIN 2566 PN16 Flanges |
EN 1092-1 Equivalent Flanges to DIN
| Some Flange feature equivalents: DIN EN 1092 from DIN | |
|---|---|
| DIN EN 1092-1 | DIN |
| DIN EN 1092-1 Type B Raised Face | DIN 2526 Form C |
| DIN EN 1092-1 Type C Tongue | DIN 2512 Feder (Form F) |
| DIN EN 1092-1 Type D Groove | DIN 2512 Nut (Form N) |
| DIN EN 1092-1 Type E Spigot | DIN 2513 Vorsprung (Form V) |
| DIN EN 1092-1 Type F Recess | DIN 2513 Rücksprung (Form R) |
EN 1092-1 Alloy Steel Flanges is used in the Following Applications:-
We Cater to Diverse Industries, including Oil and Gas, where EN 1092-1 Alloy Steel Flanges find Extensive Applications. Our EN 1092-1 Flanges Solutions meet Stringent Specifications and Industry Standards, Making them Ideal for High-Temperature Pipe Bending in Demanding Environments - Oil and Gas Equipments, Offshore Technology, Seawater Desalination Plants, Chemical Industry, Bridges, Storage Tanks, Medical Industry, Civil Engineering, Pressure Vessel, Reactor Tanks, and Heat Exchangers, Rotors, Impellers and Shafts, Power Plants, Petrochemical, Shipbuilding Industry, Pumping Stations, Nuclear Power.
EN 1092-1 Alloy Steel Flanges Packing Shipment
EN 1092-1 Alloy Steel Flanges is Covered with Plastic Cloth and Packed in Wooden Box, Wooden Pallet and Wooden Fumigated Carrate. Our Packaging is Fully Waterproof and Safe for Transport with Proper Strips on Wooden Box, having Lifting Point.
EN 1092-1 Alloy Steel Flanges Exported Countries
We Export EN 1092-1 Alloy Steel Flanges to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen , Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States Of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc
EN 1092-1 Alloy Steel Flanges Supplying in States and Cities
We Supply EN 1092-1 Alloy Steel Flanges Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Mumbai, Navi Mumbai, Pune, Nashik, Nagpur, Solapur, Kolhapur, Ambernath, Ahmednagar, Latur, Ahmadabad, Surat, Rajkot, Vadodara, Panaji, Madgaon, Chennai, Kolkata, Hyderabad, Bengaluru, Delhi, New Delhi, Ludhiana, Chandigarh, Raipur, Bhopal, Jamshedpur, Vishakhapatnam, Cochin, Ghaziabad, Noida, Gurugram, Bhillai, Durgapur, Vijaywada, Kanpur etc.
EN 1092-1 Alloy Steel Flanges are vital Components in Piping Systems, offering Reliable and Standardized Connections for various Industries. This guide has provided an overview of the key aspects of EN 1092-1 Alloy Steel Flanges, including their definition, Classification, Dimensions, Materials, Installation, and Applications. by following the Standard Guidelines and Considering Specific Project Requirements, Professionals can ensure safe and efficient piping systems that meet Industry Standards and Regulations
EN 1091-1 Long Weld Neck Flange, EN 1091-1 Stainless Steel Flanges, EN 1091-1 Carbon Steel Flanges, EN 1091-1 Alloy Steel Flanges, Din en 1092 1 flange dimensions pdf, din en 1092-1 Flange Dimensions, En 1092 1 flange dimensions, en 1092-1 flange dimensions pdf, en 1092-1 flange specifications, en 1092-1 flange standard, en 1092-1 flange weight, en 1092-1 pdf free download, en 1092-1 pn16 flange dimensions, en 1092-1 standard pdf, en 1092-1:2018 pdf free download